BMW Z series tpms reset
Resetting The System
Each time a tire inflation pressure has been corrected or a wheel or tire has been changed, reset the system.
- Start the engine, but do not start driving.
- Press the button until the yellow warning lamp in the instrument cluster lights up for a few seconds.
- Drive off.
After several minutes of driving, the current inflation pressures in the tires are adopted as the target values to be monitored. The resetting procedure is completed automatically without further notice during the trip, which can be interrupted at any time.
Resetting is continued automatically when you continue driving.
The post BMW Z series tpms reset appeared first on Seraphicguy.com.
from WordPress http://ift.tt/2rQ3b2V
via IFTTT
No comments:
Post a Comment