1999-2006 all bmw tpms reset with RDC and RDW

1999-2006 all with RDC and RDW Warning Systems

1999-2006 all bmw tpms reset with RDC and RDW 

Warning systems

BMW AG offers two different systems to warn the driver of a drop in tire pressure.

System Description Measuring Principle RDC (Available option from 03/00) Tire pressure control Tire pressure/temperature RDW (Standard equipment) Tire pressure warning Comparison of wheel speeds

RDC system

1999-2006 all with RDC and RDW Warning Systems

When a tire pressure warning light is observed, Check and inflate tire(s) to specified pressures.  After correcting the air pressure with the engine off and the ignition on, press the “Set” button and hold (approx. 6 seconds) until the words “Set tire pressure” appear in the instrument cluster (instrument cluster high) or the yellow LED lights up (basic instrument cluster).

Set button

 

Installed in the instrument panel to the right of the steering wheel. (E46: in the centre console)

Symbol:

Tire cross-section

Task:

Initialization after resetting cold tire pressure or after changing tire or wheel location.

RDW system

 

When a tire pressure warning light is observed, Check and inflate tire(s) to specified pressures.  After correcting the air pressure with the engine off and the ignition on, press the “Set” button and hold (approx. 6 seconds) until the words “Set tire pressure” appear in the instrument cluster (instrument cluster high) or the yellow LED lights up (basic instrument cluster).

Set button

Installed in the dashboard to the right of the steering wheel.

Symbol:

Tire cross-section with warning triangle.

Task:

Initialization after resetting cold tire pressure or after changing tire or wheel location.

The post 1999-2006 all bmw tpms reset with RDC and RDW appeared first on Seraphicguy.com.

from WordPress http://ift.tt/2rHL9xA
via IFTTT