Best Guide Chevrolet Volt TPMS Reset Guide

Best Guide Chevrolet Volt TPMS Reset Guide

     WITH STANDARD IGNITION:1. Set parking brake.
2. Turn ignition to ON/RUN (engine off).
3. Use the MENU button to select the Vehicle Information menu in the Driver Information Center (DIC).
4. Use thumbwheel to scroll to the Tire Pressure menu item screen.
5. Press the SET/CLR button to begin sensor matching process. A message requesting acceptance of the process should display.
6. Press the SET/CLR button again to confirm selection.
7. Starting with LF tire, increase/decrease tire pressure until horn sounds, or use TPMS relearn tool to activate each sensor.
8. After horn sounds proceed as in step 5 for the next 3 sensors in the following order:  RF, RR, LR. After completing LR tire, horn will sound twice."                                                                                                                               
"9. Turn ignition to OFF position to exit vehicle learn mode. Adjust all tires to pressure listed on tire placard.

WITH PUSH-BUTTON START:

1. Press and hold the push button start until the vehicle is in accessory mode.  Note:  on Cadillac
2. Press the MENU button located on the turn signal lever until ""VEHICLE INFORMATION MENU"" is displayed.
3. Once you are in the VEHICLE INFORMATION MENU, use the ^ v on the turn signal lever until
the DIC displays the vehicle's tire inflation pressures and positions.
4. Press and hold the button located on the end of the turn signal lever until ""Are you sure that you want to relearn? YES or NO"" is displayed.
5. Use the ^ v on the turn signal lever to highlight YES.  Once YES is highlighted, press the button located on the end of the turn signal lever. The horn will chirp, ""Tire Learning Active"" will be
displayed on the DIC, and the left front turn signal will be illuminated.
6. Beginning with the left front tire, use a TPMS activation tool to activate the left front sensor. Once the sensor has been activated, the horn will chirp and the right front turn signal will be illuminated. Repeat procedure in following order, right front sensor, right rear sensor, and finally the left rear sensor.  Once the left rear sensor has been activated, the horn will chirp twice. You
can then turn the vehicle off to exit ""learn mode."""                                                                                                                               

Best Guide Chevrolet Impala TPMS Reset 2006-2012

Best Guide Chevrolet Impala TPMS Reset 2006-2012

1. Turn the ignition to the ACC position.
2. Press and hold unlock and lock buttons on the keyless entry transmitter until horn sounds and LF turn signal is illuminated.  Or using the DIC, press and release INFO button until TIRE LEARN message is indicated on display.  Hold down SET/RESET button until horn sounds and LF turn
signal is illuminated.
3. Starting with LF tire, increase/decrease the pressure until horn sounds.
4. After horn sounds proceed as in step 3 for the next 3 sensors in the following order:  RF, RR, LR. After completing LR tire, horn will sound twice.
5. Turn ignition to OFF position to exit vehicle learn mode. Adjust all tires to pressure listed on tire placard.

Best Guide Chevrolet Impala TPMS Reset 2000-2005

Best Guide Chevrolet Impala TPMS Reset 2000-2005

  USING LIGHT SWITCH:1. Inflate all tires to pressure indicated on tire placard.
2. Turn ignition to ON position (engine off).
3. Turn the light switch from OFF to Parking Lamps 3 times within 5 seconds. USING RADIO:
1. Inflate all tires to pressure indicated on tire placard.
2. Turn ignition to ON position (engine off).
3. Turn radio off.
4. Hold DISP button until SETTINGS is displayed.
5. Use SEEK buttons to scroll down until TIRE MON is displayed.
6. Press the PREV or NEXT buttons until RESET is displayed.
7. Press the DISP button, a chime will sound and DONE is displayed.
8. Scroll until EXIT is displayed, press DISP button, chime sounds to signal exit from learn mode.

Best Guide Chevrolet Equinox TPMS Reset Guide

Best Guide Chevrolet Equinox TPMS Reset Guide

   WITH STANDARD IGNITION:
1. Apply parking brake.
2. Turn ignition to ON position (engine off).
3. Press the MENU button on the DIC (located on turn signal lever in Camaro and on instrument
cluster for all others) until the vehicle's tire pressures are displayed.
4. Press Set/Clr (this button is located at the end of the turn signal lever on Camaro).  Vehicle asks "Are you sure that you want to relearn?"  Select YES.
5. Starting at LF tire, decrease air pressure until horn chirps.  Repeat procedure for remaining
tires in the following order:  RF, RR, and LR. After completing LR tire, horn will sound twice.
6. Turn ignition to OFF position to exit vehicle learn mode. Adjust all tires to pressure listed on tire placard.
WITH PUSH-BUTTON START:
1. Press and hold the push button start until the vehicle is in accessory mode.  Note:  on Cadillac models you will know when you are in accessory mode when the Cadillac emblem appears on the DIC.
2. Press the MENU button located on the turn signal lever until "VEHICLE INFORMATION MENU" is displayed.
3. Once you are in the VEHICLE INFORMATION MENU, use the ^ v on the turn signal lever until
the DIC displays the vehicle's tire inflation pressures and positions.
4. Press and hold the button located on the end of the turn signal lever until "Are you sure that you want to relearn? YES or NO" is displayed.
5. Use the ^ v on the turn signal lever to highlight YES.  Once YES is highlighted, press the button located on the end of the turn signal lever. The horn will chirp, "Tire Learning Active" will be
displayed on the DIC, and the left front turn signal will be illuminated.
6. Beginning with the left front tire, use a TPMS activation tool to activate the left front sensor. Once the sensor has been activated, the horn will chirp and the right front turn signal will be illuminated. Repeat procedure in following order, right front sensor, right rear sensor, and finally the left rear sensor.  Once the left rear sensor has been activated, the horn will chirp twice. You
can then turn the vehicle off to exit "learn mode."

Best Guide Chevrolet Sonic TPMS Reset Guide

Best Guide Chevrolet Sonic TPMS Reset Guide

 WITH STANDARD IGNITION:
1. Set parking brake.
2. Turn ignition to ON/RUN (engine off).
3. Use the MENU button to select the Vehicle Information menu in the Driver Information Center (DIC).
4. Use thumbwheel to scroll to the Tire Pressure menu item screen.
5. Press the SET/CLR button to begin sensor matching process. A message requesting acceptance of the process should display.
6. Press the SET/CLR button again to confirm selection.
7. Starting with LF tire, increase/decrease tire pressure until horn sounds, or use TPMS relearn tool to activate each sensor.
8. After horn sounds proceed as in step 5 for the next 3 sensors in the following order:  RF, RR, LR. After completing LR tire, horn will sound twice."                                                                                                                               
"9. Turn ignition to OFF position to exit vehicle learn mode. Adjust all tires to pressure listed on tire placard.
WITH PUSH-BUTTON START:
1. Press and hold the push button start until the vehicle is in accessory mode.  Note:  on Cadillac
2. Press the MENU button located on the turn signal lever until ""VEHICLE INFORMATION MENU"" is displayed.
3. Once you are in the VEHICLE INFORMATION MENU, use the ^ v on the turn signal lever until
the DIC displays the vehicle's tire inflation pressures and positions.
4. Press and hold the button located on the end of the turn signal lever until ""Are you sure that you want to relearn? YES or NO"" is displayed.
5. Use the ^ v on the turn signal lever to highlight YES.  Once YES is highlighted, press the button located on the end of the turn signal lever. The horn will chirp, ""Tire Learning Active"" will be
displayed on the DIC, and the left front turn signal will be illuminated.
6. Beginning with the left front tire, use a TPMS activation tool to activate the left front sensor. Once the sensor has been activated, the horn will chirp and the right front turn signal will be illuminated. Repeat procedure in following order, right front sensor, right rear sensor, and finally the left rear sensor.  Once the left rear sensor has been activated, the horn will chirp twice. You
can then turn the vehicle off to exit ""learn mode."""                                                                                                                               

Best Guide Chevrolet Orlando TPMS Reset Guide

Best Guide Chevrolet Orlando TPMS Reset Guide

 WITH STANDARD IGNITION:
1. Set parking brake.
2. Turn ignition to ON/RUN (engine off).
3. Use the MENU button to select the Vehicle Information menu in the Driver Information Center (DIC).
4. Use thumbwheel to scroll to the Tire Pressure menu item screen.
5. Press the SET/CLR button to begin sensor matching process. A message requesting acceptance of the process should display.
6. Press the SET/CLR button again to confirm selection.
7. Starting with LF tire, increase/decrease tire pressure until horn sounds, or use TPMS relearn tool to activate each sensor.
8. After horn sounds proceed as in step 5 for the next 3 sensors in the following order:  RF, RR, LR. After completing LR tire, horn will sound twice."                                                                                                                               
"9. Turn ignition to OFF position to exit vehicle learn mode. Adjust all tires to pressure listed on tire placard.

WITH PUSH-BUTTON START:

 
1. Press and hold the push button start until the vehicle is in accessory mode.  Note:  on Cadillac
2. Press the MENU button located on the turn signal lever until ""VEHICLE INFORMATION MENU"" is displayed.
3. Once you are in the VEHICLE INFORMATION MENU, use the ^ v on the turn signal lever until
the DIC displays the vehicle's tire inflation pressures and positions.
4. Press and hold the button located on the end of the turn signal lever until ""Are you sure that you want to relearn? YES or NO"" is displayed.
5. Use the ^ v on the turn signal lever to highlight YES.  Once YES is highlighted, press the button located on the end of the turn signal lever. The horn will chirp, ""Tire Learning Active"" will be
displayed on the DIC, and the left front turn signal will be illuminated.
6. Beginning with the left front tire, use a TPMS activation tool to activate the left front sensor. Once the sensor has been activated, the horn will chirp and the right front turn signal will be illuminated. Repeat procedure in following order, right front sensor, right rear sensor, and finally the left rear sensor.  Once the left rear sensor has been activated, the horn will chirp twice. You
can then turn the vehicle off to exit ""learn mode."""                                                                                                                               

Best Guide Chevrolet Cruze TPMS Reset Guide

Best Guide Chevrolet Cruze TPMS Reset Guide

 WITH STANDARD IGNITION:
1. Set parking brake.
2. Turn ignition to ON/RUN (engine off).
3. Use the MENU button to select the Vehicle Information menu in the Driver Information Center (DIC).
4. Use thumbwheel to scroll to the Tire Pressure menu item screen.
5. Press the SET/CLR button to begin sensor matching process. A message requesting acceptance of the process should display.
6. Press the SET/CLR button again to confirm selection.
7. Starting with LF tire, increase/decrease tire pressure until horn sounds, or use TPMS relearn tool to activate each sensor.
8. After horn sounds proceed as in step 5 for the next 3 sensors in the following order:  RF, RR, LR. After completing LR tire, horn will sound twice."                                                                                                                               
"9. Turn ignition to OFF position to exit vehicle learn mode. Adjust all tires to pressure listed on tire placard.

WITH PUSH-BUTTON START:
1. Press and hold the push button start until the vehicle is in accessory mode.  Note:  on Cadillac
2. Press the MENU button located on the turn signal lever until ""VEHICLE INFORMATION MENU"" is displayed.
3. Once you are in the VEHICLE INFORMATION MENU, use the ^ v on the turn signal lever until
the DIC displays the vehicle's tire inflation pressures and positions.
4. Press and hold the button located on the end of the turn signal lever until ""Are you sure that you want to relearn? YES or NO"" is displayed.
5. Use the ^ v on the turn signal lever to highlight YES.  Once YES is highlighted, press the button located on the end of the turn signal lever. The horn will chirp, ""Tire Learning Active"" will be
displayed on the DIC, and the left front turn signal will be illuminated.
6. Beginning with the left front tire, use a TPMS activation tool to activate the left front sensor. Once the sensor has been activated, the horn will chirp and the right front turn signal will be illuminated. Repeat procedure in following order, right front sensor, right rear sensor, and finally the left rear sensor.  Once the left rear sensor has been activated, the horn will chirp twice. You
can then turn the vehicle off to exit ""learn mode."""                                                                                                                               

Best Guide Chevrolet Corvette TPMS Reset 2003-2004

Best Guide Chevrolet Corvette TPMS Reset 2003-2004

  1. Inflate all tires to pressure indicated on tire placard.
2. Turn the ignition switch to the ON position (engine off).
3. Press the RESET button on the DIC to clear any warning messages.
4. Press and release the OPTIONS button on the DLC until the display is blank.
5. Press and hold the RESET button on the DIC for three seconds.
6. Press and release the OPTIONS button again until the message TIRE TRAINING is displayed.
7. Starting at LF tire, place relearn magnet over valve stem until horn sounds.
8. After horn chirp has sounded, proceed as in step 6 for the next three sensors in the following order: RF, RR, LR.
9. Turn the ignition switch to the OFF position to exit the relearn mode.

Best Guide Chevrolet Corvette TPMS Reset 1991-1996

 Best Guide Chevrolet Corvette TPMS Reset 1991-1996

AUTO RELEARN: Ensure all tires are inflated to the pressure listed on the tire placard.  When ignition is turned off, the system will be cleared and the TPMS Telltale will turn off. The system
will recalibrate when vehicle is operated at a speed of 30 mph for a minimum of 30 seconds.

Best Guide Chevrolet Malibu TPMS Reset 2001-2012

Best Guide Chevrolet Malibu TPMS Reset 2001-2012

||||||||||||\WITH STANDARD IGNITION:
1. Turn ignition switch to ON position (engine off).
2. Press and hold unlock and lock buttons on the keyless entry transmitter until horn sounds, and then LF turn signal will become illuminated.
3. Starting at the LF tire, increase/decrease pressure until horn sounds.
4. After horn sounds, procede as in step 3 for the next 3 sensors in the following order:  RF, RR, LR. After completing LR tire, horn will sound twice.
5. Turn ignition to OFF position to exit vehicle learn mode. Adjust all tires to pressure listed on tire placard.
WITH PUSH-BUTTON START:
1. Press and hold the push button start until the vehicle is in accessory mode.  Note:  on Cadillac models you will know when you are in accessory mode when the Cadillac emblem appears on the DIC.
2. Press the MENU button located on the turn signal lever until ""VEHICLE INFORMATION MENU"" is displayed.
3. Once you are in the VEHICLE INFORMATION MENU, use the ^ v on the turn signal lever until
the DIC displays the vehicle's tire inflation pressures and position.
4. Press and hold the button located on the end of the turn signal lever until ""Are you sure that you want to relearn? YES or NO"" is displayed.
5. Use the ^ v on the turn signal lever to highlight YES.  Once YES is highlighted, press the button
located on the end of the turn signal lever. The horn will chirp, ""Tire Learning Active"" will be displayed on the DIC, and the left front turn signal will be illuminated.
6. Beginning with the left front tire, use a TPMS activation tool to activate the left front sensor.
Once the sensor has been activated, the horn will chirp and the right front turn signal will be illuminated. Repeat procedure in following order, right front sensor, right rear sensor, and finally the left rear sensor.  Once the left rear sensor has been activated, the horn will chirp twice. You
can then turn the vehicle off to exit ""learn mode."""    |||||||||

Best Guide Chevrolet HHR TPMS Reset 2008-2011

Best Guide Chevrolet HHR TPMS Reset 2008-2011

||||||||||||\WITH STANDARD IGNITION:
1. Turn ignition switch to ON position (engine off).
2. Press and hold unlock and lock buttons on the keyless entry transmitter until horn sounds, and then LF turn signal will become illuminated.
3. Starting at the LF tire, increase/decrease pressure until horn sounds.
4. After horn sounds, procede as in step 3 for the next 3 sensors in the following order:  RF, RR, LR. After completing LR tire, horn will sound twice.
5. Turn ignition to OFF position to exit vehicle learn mode. Adjust all tires to pressure listed on tire placard.
WITH PUSH-BUTTON START:
1. Press and hold the push button start until the vehicle is in accessory mode.  Note:  on Cadillac models you will know when you are in accessory mode when the Cadillac emblem appears on the DIC.
2. Press the MENU button located on the turn signal lever until ""VEHICLE INFORMATION MENU"" is displayed.
3. Once you are in the VEHICLE INFORMATION MENU, use the ^ v on the turn signal lever until
the DIC displays the vehicle's tire inflation pressures and position.
4. Press and hold the button located on the end of the turn signal lever until ""Are you sure that you want to relearn? YES or NO"" is displayed.
5. Use the ^ v on the turn signal lever to highlight YES.  Once YES is highlighted, press the button
located on the end of the turn signal lever. The horn will chirp, ""Tire Learning Active"" will be displayed on the DIC, and the left front turn signal will be illuminated.
6. Beginning with the left front tire, use a TPMS activation tool to activate the left front sensor.
Once the sensor has been activated, the horn will chirp and the right front turn signal will be illuminated. Repeat procedure in following order, right front sensor, right rear sensor, and finally the left rear sensor.  Once the left rear sensor has been activated, the horn will chirp twice. You
can then turn the vehicle off to exit ""learn mode."""    |||||||||

Best Guide Chevrolet Express TPMS Reset Guide

Best Guide Chevrolet Express TPMS Reset Guide

||||||||||||\WITH STANDARD IGNITION:
1. Turn ignition switch to ON position (engine off).
2. Press and hold unlock and lock buttons on the keyless entry transmitter until horn sounds, and then LF turn signal will become illuminated.
3. Starting at the LF tire, increase/decrease pressure until horn sounds.
4. After horn sounds, procede as in step 3 for the next 3 sensors in the following order:  RF, RR, LR. After completing LR tire, horn will sound twice.
5. Turn ignition to OFF position to exit vehicle learn mode. Adjust all tires to pressure listed on tire placard.
WITH PUSH-BUTTON START:
1. Press and hold the push button start until the vehicle is in accessory mode.  Note:  on Cadillac models you will know when you are in accessory mode when the Cadillac emblem appears on the DIC.
2. Press the MENU button located on the turn signal lever until ""VEHICLE INFORMATION MENU"" is displayed.
3. Once you are in the VEHICLE INFORMATION MENU, use the ^ v on the turn signal lever until
the DIC displays the vehicle's tire inflation pressures and position.
4. Press and hold the button located on the end of the turn signal lever until ""Are you sure that you want to relearn? YES or NO"" is displayed.
5. Use the ^ v on the turn signal lever to highlight YES.  Once YES is highlighted, press the button
located on the end of the turn signal lever. The horn will chirp, ""Tire Learning Active"" will be displayed on the DIC, and the left front turn signal will be illuminated.
6. Beginning with the left front tire, use a TPMS activation tool to activate the left front sensor.
Once the sensor has been activated, the horn will chirp and the right front turn signal will be illuminated. Repeat procedure in following order, right front sensor, right rear sensor, and finally the left rear sensor.  Once the left rear sensor has been activated, the horn will chirp twice. You
can then turn the vehicle off to exit ""learn mode."""    |||||||||

Best Guide Chevrolet Corvette TPMS Reset Guide

Best Guide Chevrolet Corvette TPMS Reset Guide

||||||||||||\WITH STANDARD IGNITION:
1. Turn ignition switch to ON position (engine off).
2. Press and hold unlock and lock buttons on the keyless entry transmitter until horn sounds, and then LF turn signal will become illuminated.
3. Starting at the LF tire, increase/decrease pressure until horn sounds.
4. After horn sounds, procede as in step 3 for the next 3 sensors in the following order:  RF, RR, LR. After completing LR tire, horn will sound twice.
5. Turn ignition to OFF position to exit vehicle learn mode. Adjust all tires to pressure listed on tire placard.
WITH PUSH-BUTTON START:
1. Press and hold the push button start until the vehicle is in accessory mode.  Note:  on Cadillac models you will know when you are in accessory mode when the Cadillac emblem appears on the DIC.
2. Press the MENU button located on the turn signal lever until ""VEHICLE INFORMATION MENU"" is displayed.
3. Once you are in the VEHICLE INFORMATION MENU, use the ^ v on the turn signal lever until
the DIC displays the vehicle's tire inflation pressures and position.
4. Press and hold the button located on the end of the turn signal lever until ""Are you sure that you want to relearn? YES or NO"" is displayed.
5. Use the ^ v on the turn signal lever to highlight YES.  Once YES is highlighted, press the button
located on the end of the turn signal lever. The horn will chirp, ""Tire Learning Active"" will be displayed on the DIC, and the left front turn signal will be illuminated.
6. Beginning with the left front tire, use a TPMS activation tool to activate the left front sensor.
Once the sensor has been activated, the horn will chirp and the right front turn signal will be illuminated. Repeat procedure in following order, right front sensor, right rear sensor, and finally the left rear sensor.  Once the left rear sensor has been activated, the horn will chirp twice. You
can then turn the vehicle off to exit ""learn mode."""    |||||||||