Best Guide Chevrolet Captiva TPMS Reset Guide

Best Guide Chevrolet Captiva TPMS Reset Guide

||||||||||||\WITH STANDARD IGNITION:
1. Turn ignition switch to ON position (engine off).
2. Press and hold unlock and lock buttons on the keyless entry transmitter until horn sounds, and then LF turn signal will become illuminated.
3. Starting at the LF tire, increase/decrease pressure until horn sounds.
4. After horn sounds, procede as in step 3 for the next 3 sensors in the following order:  RF, RR, LR. After completing LR tire, horn will sound twice.
5. Turn ignition to OFF position to exit vehicle learn mode. Adjust all tires to pressure listed on tire placard.
WITH PUSH-BUTTON START:
1. Press and hold the push button start until the vehicle is in accessory mode.  Note:  on Cadillac models you will know when you are in accessory mode when the Cadillac emblem appears on the DIC.
2. Press the MENU button located on the turn signal lever until ""VEHICLE INFORMATION MENU"" is displayed.
3. Once you are in the VEHICLE INFORMATION MENU, use the ^ v on the turn signal lever until
the DIC displays the vehicle's tire inflation pressures and position.
4. Press and hold the button located on the end of the turn signal lever until ""Are you sure that you want to relearn? YES or NO"" is displayed.
5. Use the ^ v on the turn signal lever to highlight YES.  Once YES is highlighted, press the button
located on the end of the turn signal lever. The horn will chirp, ""Tire Learning Active"" will be displayed on the DIC, and the left front turn signal will be illuminated.
6. Beginning with the left front tire, use a TPMS activation tool to activate the left front sensor.
Once the sensor has been activated, the horn will chirp and the right front turn signal will be illuminated. Repeat procedure in following order, right front sensor, right rear sensor, and finally the left rear sensor.  Once the left rear sensor has been activated, the horn will chirp twice. You
can then turn the vehicle off to exit ""learn mode."""    |||||||||

Best Guide Chevrolet Avalanche TPMS Reset 2008-2012 GuideBest Guide Chevrolet Avalanche TPMS Reset Guide

Best Guide Chevrolet Avalanche TPMS Reset 2008-2012 Guide

||||||||||||\WITH STANDARD IGNITION:
1. Turn ignition switch to ON position (engine off).
2. Press and hold unlock and lock buttons on the keyless entry transmitter until horn sounds, and then LF turn signal will become illuminated.
3. Starting at the LF tire, increase/decrease pressure until horn sounds.
4. After horn sounds, procede as in step 3 for the next 3 sensors in the following order:  RF, RR, LR. After completing LR tire, horn will sound twice.
5. Turn ignition to OFF position to exit vehicle learn mode. Adjust all tires to pressure listed on tire placard.
WITH PUSH-BUTTON START:
1. Press and hold the push button start until the vehicle is in accessory mode.  Note:  on Cadillac models you will know when you are in accessory mode when the Cadillac emblem appears on the DIC.
2. Press the MENU button located on the turn signal lever until ""VEHICLE INFORMATION MENU"" is displayed.
3. Once you are in the VEHICLE INFORMATION MENU, use the ^ v on the turn signal lever until
the DIC displays the vehicle's tire inflation pressures and position.
4. Press and hold the button located on the end of the turn signal lever until ""Are you sure that you want to relearn? YES or NO"" is displayed.
5. Use the ^ v on the turn signal lever to highlight YES.  Once YES is highlighted, press the button
located on the end of the turn signal lever. The horn will chirp, ""Tire Learning Active"" will be displayed on the DIC, and the left front turn signal will be illuminated.
6. Beginning with the left front tire, use a TPMS activation tool to activate the left front sensor.
Once the sensor has been activated, the horn will chirp and the right front turn signal will be illuminated. Repeat procedure in following order, right front sensor, right rear sensor, and finally the left rear sensor.  Once the left rear sensor has been activated, the horn will chirp twice. You
can then turn the vehicle off to exit ""learn mode."""    |||||||||

Best Guide Chevrolet Traverse TPMS Reset

Best Guide Chevrolet Traverse TPMS Reset

||||||||||||\WITH STANDARD IGNITION:
1. Turn ignition switch to ON position (engine off).
2. Press and hold unlock and lock buttons on the keyless entry transmitter until horn sounds, and then LF turn signal will become illuminated.
3. Starting at the LF tire, increase/decrease pressure until horn sounds.
4. After horn sounds, procede as in step 3 for the next 3 sensors in the following order:  RF, RR, LR. After completing LR tire, horn will sound twice.
5. Turn ignition to OFF position to exit vehicle learn mode. Adjust all tires to pressure listed on tire placard.
WITH PUSH-BUTTON START:
1. Press and hold the push button start until the vehicle is in accessory mode.  Note:  on Cadillac models you will know when you are in accessory mode when the Cadillac emblem appears on the DIC.
2. Press the MENU button located on the turn signal lever until ""VEHICLE INFORMATION MENU"" is displayed.
3. Once you are in the VEHICLE INFORMATION MENU, use the ^ v on the turn signal lever until
the DIC displays the vehicle's tire inflation pressures and position.
4. Press and hold the button located on the end of the turn signal lever until ""Are you sure that you want to relearn? YES or NO"" is displayed.
5. Use the ^ v on the turn signal lever to highlight YES.  Once YES is highlighted, press the button
located on the end of the turn signal lever. The horn will chirp, ""Tire Learning Active"" will be displayed on the DIC, and the left front turn signal will be illuminated.
6. Beginning with the left front tire, use a TPMS activation tool to activate the left front sensor.
Once the sensor has been activated, the horn will chirp and the right front turn signal will be illuminated. Repeat procedure in following order, right front sensor, right rear sensor, and finally the left rear sensor.  Once the left rear sensor has been activated, the horn will chirp twice. You
can then turn the vehicle off to exit ""learn mode."""    |||||||||

Best Guide Chevrolet Tahoe TPMS Reset 2008-2012 Guide

Best Guide Chevrolet Tahoe TPMS Reset 2008-2012 Guide

||||||||||||\WITH STANDARD IGNITION:
1. Turn ignition switch to ON position (engine off).
2. Press and hold unlock and lock buttons on the keyless entry transmitter until horn sounds, and then LF turn signal will become illuminated.
3. Starting at the LF tire, increase/decrease pressure until horn sounds.
4. After horn sounds, procede as in step 3 for the next 3 sensors in the following order:  RF, RR, LR. After completing LR tire, horn will sound twice.
5. Turn ignition to OFF position to exit vehicle learn mode. Adjust all tires to pressure listed on tire placard.
WITH PUSH-BUTTON START:
1. Press and hold the push button start until the vehicle is in accessory mode.  Note:  on Cadillac models you will know when you are in accessory mode when the Cadillac emblem appears on the DIC.
2. Press the MENU button located on the turn signal lever until ""VEHICLE INFORMATION MENU"" is displayed.
3. Once you are in the VEHICLE INFORMATION MENU, use the ^ v on the turn signal lever until
the DIC displays the vehicle's tire inflation pressures and position.
4. Press and hold the button located on the end of the turn signal lever until ""Are you sure that you want to relearn? YES or NO"" is displayed.
5. Use the ^ v on the turn signal lever to highlight YES.  Once YES is highlighted, press the button
located on the end of the turn signal lever. The horn will chirp, ""Tire Learning Active"" will be displayed on the DIC, and the left front turn signal will be illuminated.
6. Beginning with the left front tire, use a TPMS activation tool to activate the left front sensor.
Once the sensor has been activated, the horn will chirp and the right front turn signal will be illuminated. Repeat procedure in following order, right front sensor, right rear sensor, and finally the left rear sensor.  Once the left rear sensor has been activated, the horn will chirp twice. You
can then turn the vehicle off to exit ""learn mode."""    |||||||||

Best Guide Chevrolet Suburban 2008-2012 TPMS Reset

Best Guide Chevrolet Suburban 2008-2012 TPMS Reset

||||||||||||\WITH STANDARD IGNITION:
1. Turn ignition switch to ON position (engine off).
2. Press and hold unlock and lock buttons on the keyless entry transmitter until horn sounds, and then LF turn signal will become illuminated.
3. Starting at the LF tire, increase/decrease pressure until horn sounds.
4. After horn sounds, procede as in step 3 for the next 3 sensors in the following order:  RF, RR, LR. After completing LR tire, horn will sound twice.
5. Turn ignition to OFF position to exit vehicle learn mode. Adjust all tires to pressure listed on tire placard.
WITH PUSH-BUTTON START:
1. Press and hold the push button start until the vehicle is in accessory mode.  Note:  on Cadillac models you will know when you are in accessory mode when the Cadillac emblem appears on the DIC.
2. Press the MENU button located on the turn signal lever until ""VEHICLE INFORMATION MENU"" is displayed.
3. Once you are in the VEHICLE INFORMATION MENU, use the ^ v on the turn signal lever until
the DIC displays the vehicle's tire inflation pressures and position.
4. Press and hold the button located on the end of the turn signal lever until ""Are you sure that you want to relearn? YES or NO"" is displayed.
5. Use the ^ v on the turn signal lever to highlight YES.  Once YES is highlighted, press the button
located on the end of the turn signal lever. The horn will chirp, ""Tire Learning Active"" will be displayed on the DIC, and the left front turn signal will be illuminated.
6. Beginning with the left front tire, use a TPMS activation tool to activate the left front sensor.
Once the sensor has been activated, the horn will chirp and the right front turn signal will be illuminated. Repeat procedure in following order, right front sensor, right rear sensor, and finally the left rear sensor.  Once the left rear sensor has been activated, the horn will chirp twice. You
can then turn the vehicle off to exit ""learn mode."""    |||||||||

Best Guide Chevrolet Silverado 2008-2012 TPMS Reset

Best Guide Chevrolet Silverado 2008-2012 TPMS Reset

||||||||||||\WITH STANDARD IGNITION:
1. Turn ignition switch to ON position (engine off).
2. Press and hold unlock and lock buttons on the keyless entry transmitter until horn sounds, and then LF turn signal will become illuminated.
3. Starting at the LF tire, increase/decrease pressure until horn sounds.
4. After horn sounds, procede as in step 3 for the next 3 sensors in the following order:  RF, RR, LR. After completing LR tire, horn will sound twice.
5. Turn ignition to OFF position to exit vehicle learn mode. Adjust all tires to pressure listed on tire placard.
WITH PUSH-BUTTON START:
1. Press and hold the push button start until the vehicle is in accessory mode.  Note:  on Cadillac models you will know when you are in accessory mode when the Cadillac emblem appears on the DIC.
2. Press the MENU button located on the turn signal lever until ""VEHICLE INFORMATION MENU"" is displayed.
3. Once you are in the VEHICLE INFORMATION MENU, use the ^ v on the turn signal lever until
the DIC displays the vehicle's tire inflation pressures and position.
4. Press and hold the button located on the end of the turn signal lever until ""Are you sure that you want to relearn? YES or NO"" is displayed.
5. Use the ^ v on the turn signal lever to highlight YES.  Once YES is highlighted, press the button
located on the end of the turn signal lever. The horn will chirp, ""Tire Learning Active"" will be displayed on the DIC, and the left front turn signal will be illuminated.
6. Beginning with the left front tire, use a TPMS activation tool to activate the left front sensor.
Once the sensor has been activated, the horn will chirp and the right front turn signal will be illuminated. Repeat procedure in following order, right front sensor, right rear sensor, and finally the left rear sensor.  Once the left rear sensor has been activated, the horn will chirp twice. You
can then turn the vehicle off to exit ""learn mode."""    |||||||||

Best Guide Chevrolet Uplander TPMS Reset Guide

Best Guide Chevrolet Uplander TPMS Reset Guide

****************WITH STANDARD IGNITION:
1. Turn the ignition to the ON position (engine off).
2. Using keyless entry system:  press and hold lock and unlock buttons simultaneously until horn sounds, and then LF turn signal will become illuminated to indicate learn mode enabled.  Or using the DIC, press and release INFO button until TIRE LEARN message is indicated on display.  Hold down SET/RESET button until horn sounds, LF turn signal is illuminated to indicate learn mode enabled. NOTE:  For vehicles not equipped with keyless entry system OE, see procedure 6 relearn summary.
3. Starting with LF tire, increase/decrease the pressure until horn sounds.
4. After horn sounds, preceed as in step 3 for the next 3 sensors in the following order:  RF, RR, LR.
5. After LR sensor has been learned, turn ignition to OFF position. Adjust all tires to pressure listed on tire placard.

WITH PUSH-BUTTON START:

1. Press and hold the push button start until the vehicle is in accessory mode.  Note:  on Cadillac models you will know when you are in accessory mode when the Cadillac emblem appears on the DIC.
2. Press the MENU button located on the turn signal lever until ""VEHICLE INFORMATION MENU"" is displayed.
3. Once you are in the VEHICLE INFORMATION MENU, use the ^ v on the turn signal lever until
the DIC displays the vehicle's tire inflation pressures and position.
4. Press and hold the button located on the end of the turn signal lever until ""Are you sure that you want to relearn? YES or NO"" is displayed.
5. Use the ^ v on the turn signal lever to highlight YES.  Once YES is highlighted, press the button
located on the end of the turn signal lever. The horn will chirp, ""Tire Learning Active"" will be displayed on the DIC, and the left front turn signal will be illuminated.
6. Beginning with the left front tire, use a TPMS activation tool to activate the left front sensor.
Once the sensor has been activated, the horn will chirp and the right front turn signal will be illuminated. Repeat procedure in following order, right front sensor, right rear sensor, and finally the left rear sensor.  Once the left rear sensor has been activated, the horn will chirp twice. You
can then turn the vehicle off to exit ""learn mode."""  *********************

Best Guide Chevrolet Malibu TPMS Reset Guide

Best Guide Chevrolet Malibu TPMS Reset Guide

****************WITH STANDARD IGNITION:
1. Turn the ignition to the ON position (engine off).
2. Using keyless entry system:  press and hold lock and unlock buttons simultaneously until horn sounds, and then LF turn signal will become illuminated to indicate learn mode enabled.  Or using the DIC, press and release INFO button until TIRE LEARN message is indicated on display.  Hold down SET/RESET button until horn sounds, LF turn signal is illuminated to indicate learn mode enabled. NOTE:  For vehicles not equipped with keyless entry system OE, see procedure 6 relearn summary.
3. Starting with LF tire, increase/decrease the pressure until horn sounds.
4. After horn sounds, preceed as in step 3 for the next 3 sensors in the following order:  RF, RR, LR.
5. After LR sensor has been learned, turn ignition to OFF position. Adjust all tires to pressure listed on tire placard.

WITH PUSH-BUTTON START:

1. Press and hold the push button start until the vehicle is in accessory mode.  Note:  on Cadillac models you will know when you are in accessory mode when the Cadillac emblem appears on the DIC.
2. Press the MENU button located on the turn signal lever until ""VEHICLE INFORMATION MENU"" is displayed.
3. Once you are in the VEHICLE INFORMATION MENU, use the ^ v on the turn signal lever until
the DIC displays the vehicle's tire inflation pressures and position.
4. Press and hold the button located on the end of the turn signal lever until ""Are you sure that you want to relearn? YES or NO"" is displayed.
5. Use the ^ v on the turn signal lever to highlight YES.  Once YES is highlighted, press the button
located on the end of the turn signal lever. The horn will chirp, ""Tire Learning Active"" will be displayed on the DIC, and the left front turn signal will be illuminated.
6. Beginning with the left front tire, use a TPMS activation tool to activate the left front sensor.
Once the sensor has been activated, the horn will chirp and the right front turn signal will be illuminated. Repeat procedure in following order, right front sensor, right rear sensor, and finally the left rear sensor.  Once the left rear sensor has been activated, the horn will chirp twice. You
can then turn the vehicle off to exit ""learn mode."""  *********************

Best Guide Chevrolet HHR TPMS Reset Guide

Best Guide Chevrolet HHR TPMS Reset Guide

****************WITH STANDARD IGNITION:
1. Turn the ignition to the ON position (engine off).
2. Using keyless entry system:  press and hold lock and unlock buttons simultaneously until horn sounds, and then LF turn signal will become illuminated to indicate learn mode enabled.  Or using the DIC, press and release INFO button until TIRE LEARN message is indicated on display.  Hold down SET/RESET button until horn sounds, LF turn signal is illuminated to indicate learn mode enabled. NOTE:  For vehicles not equipped with keyless entry system OE, see procedure 6 relearn summary.
3. Starting with LF tire, increase/decrease the pressure until horn sounds.
4. After horn sounds, preceed as in step 3 for the next 3 sensors in the following order:  RF, RR, LR.
5. After LR sensor has been learned, turn ignition to OFF position. Adjust all tires to pressure listed on tire placard.

WITH PUSH-BUTTON START:

1. Press and hold the push button start until the vehicle is in accessory mode.  Note:  on Cadillac models you will know when you are in accessory mode when the Cadillac emblem appears on the DIC.
2. Press the MENU button located on the turn signal lever until ""VEHICLE INFORMATION MENU"" is displayed.
3. Once you are in the VEHICLE INFORMATION MENU, use the ^ v on the turn signal lever until
the DIC displays the vehicle's tire inflation pressures and position.
4. Press and hold the button located on the end of the turn signal lever until ""Are you sure that you want to relearn? YES or NO"" is displayed.
5. Use the ^ v on the turn signal lever to highlight YES.  Once YES is highlighted, press the button
located on the end of the turn signal lever. The horn will chirp, ""Tire Learning Active"" will be displayed on the DIC, and the left front turn signal will be illuminated.
6. Beginning with the left front tire, use a TPMS activation tool to activate the left front sensor.
Once the sensor has been activated, the horn will chirp and the right front turn signal will be illuminated. Repeat procedure in following order, right front sensor, right rear sensor, and finally the left rear sensor.  Once the left rear sensor has been activated, the horn will chirp twice. You
can then turn the vehicle off to exit ""learn mode."""  *********************

Best Guide Chevrolet Cobalt TPMS Reset Guide

Best Guide Chevrolet Cobalt TPMS Reset Guide

****************WITH STANDARD IGNITION:
1. Turn the ignition to the ON position (engine off).
2. Using keyless entry system:  press and hold lock and unlock buttons simultaneously until horn sounds, and then LF turn signal will become illuminated to indicate learn mode enabled.  Or using the DIC, press and release INFO button until TIRE LEARN message is indicated on display.  Hold down SET/RESET button until horn sounds, LF turn signal is illuminated to indicate learn mode enabled. NOTE:  For vehicles not equipped with keyless entry system OE, see procedure 6 relearn summary.
3. Starting with LF tire, increase/decrease the pressure until horn sounds.
4. After horn sounds, preceed as in step 3 for the next 3 sensors in the following order:  RF, RR, LR.
5. After LR sensor has been learned, turn ignition to OFF position. Adjust all tires to pressure listed on tire placard.

WITH PUSH-BUTTON START:

1. Press and hold the push button start until the vehicle is in accessory mode.  Note:  on Cadillac models you will know when you are in accessory mode when the Cadillac emblem appears on the DIC.
2. Press the MENU button located on the turn signal lever until ""VEHICLE INFORMATION MENU"" is displayed.
3. Once you are in the VEHICLE INFORMATION MENU, use the ^ v on the turn signal lever until
the DIC displays the vehicle's tire inflation pressures and position.
4. Press and hold the button located on the end of the turn signal lever until ""Are you sure that you want to relearn? YES or NO"" is displayed.
5. Use the ^ v on the turn signal lever to highlight YES.  Once YES is highlighted, press the button
located on the end of the turn signal lever. The horn will chirp, ""Tire Learning Active"" will be displayed on the DIC, and the left front turn signal will be illuminated.
6. Beginning with the left front tire, use a TPMS activation tool to activate the left front sensor.
Once the sensor has been activated, the horn will chirp and the right front turn signal will be illuminated. Repeat procedure in following order, right front sensor, right rear sensor, and finally the left rear sensor.  Once the left rear sensor has been activated, the horn will chirp twice. You
can then turn the vehicle off to exit ""learn mode."""  *********************

Best Guide Chevrolet Caprice TPMS Reset Guide

Best Guide Chevrolet Caprice TPMS Reset Guide

 ****************WITH STANDARD IGNITION:
1. Turn the ignition to the ON position (engine off).
2. Using keyless entry system:  press and hold lock and unlock buttons simultaneously until horn sounds, and then LF turn signal will become illuminated to indicate learn mode enabled.  Or using the DIC, press and release INFO button until TIRE LEARN message is indicated on display.  Hold down SET/RESET button until horn sounds, LF turn signal is illuminated to indicate learn mode enabled. NOTE:  For vehicles not equipped with keyless entry system OE, see procedure 6 relearn summary.
3. Starting with LF tire, increase/decrease the pressure until horn sounds.
4. After horn sounds, preceed as in step 3 for the next 3 sensors in the following order:  RF, RR, LR.
5. After LR sensor has been learned, turn ignition to OFF position. Adjust all tires to pressure listed on tire placard.

WITH PUSH-BUTTON START:

1. Press and hold the push button start until the vehicle is in accessory mode.  Note:  on Cadillac models you will know when you are in accessory mode when the Cadillac emblem appears on the DIC.
2. Press the MENU button located on the turn signal lever until ""VEHICLE INFORMATION MENU"" is displayed.
3. Once you are in the VEHICLE INFORMATION MENU, use the ^ v on the turn signal lever until
the DIC displays the vehicle's tire inflation pressures and position.
4. Press and hold the button located on the end of the turn signal lever until ""Are you sure that you want to relearn? YES or NO"" is displayed.
5. Use the ^ v on the turn signal lever to highlight YES.  Once YES is highlighted, press the button
located on the end of the turn signal lever. The horn will chirp, ""Tire Learning Active"" will be displayed on the DIC, and the left front turn signal will be illuminated.
6. Beginning with the left front tire, use a TPMS activation tool to activate the left front sensor.
Once the sensor has been activated, the horn will chirp and the right front turn signal will be illuminated. Repeat procedure in following order, right front sensor, right rear sensor, and finally the left rear sensor.  Once the left rear sensor has been activated, the horn will chirp twice. You
can then turn the vehicle off to exit ""learn mode."""  *********************

Best Guide Chevrolet Aveo TPMS Reset Guide

Best Guide Chevrolet Aveo TPMS Reset Guide

A properly formatted scan is required for learning new sensor IDs.

Best Guide Chevrolet Trailblazer TPMS Reset Instruction

Best Guide Chevrolet Trailblazer TPMS Reset Instruction

 1. Apply parking brake. Turn ignition to ON position (engine off).
2. Turn headlight switch from OFF to parking lamps 4 times within 4 seconds. A double horn chirp
will sound and the TPMS telltale will begin blinking to indicate the learn mode is enabled.
3. Starting at the LF tire, increase/decrease pressure until horn sounds.
4. After horn sounds, procede as in step 3 for the next 3 sensors in the following order:  RF, RR, LR.
5. After LR sensor has been learned, turn ignition to OFF position. Adjust all tires to pressure listed on tire placard.
*If headlight switch does not enable TPMS Learn Mode, press the vehicle information
button on the DIC until vehicle learn mode option is displayed."