Monday, September 4, 2017

Best Guide Chevrolet HHR TPMS Reset Guide


Best Guide Chevrolet HHR TPMS Reset Guide
Best Guide Chevrolet HHR TPMS Reset Guide

****************WITH STANDARD IGNITION:
1. Turn the ignition to the ON position (engine off).
2. Using keyless entry system:  press and hold lock and unlock buttons simultaneously until horn sounds, and then LF turn signal will become illuminated to indicate learn mode enabled.  Or using the DIC, press and release INFO button until TIRE LEARN message is indicated on display.  Hold down SET/RESET button until horn sounds, LF turn signal is illuminated to indicate learn mode enabled. NOTE:  For vehicles not equipped with keyless entry system OE, see procedure 6 relearn summary.
3. Starting with LF tire, increase/decrease the pressure until horn sounds.
4. After horn sounds, preceed as in step 3 for the next 3 sensors in the following order:  RF, RR, LR.
5. After LR sensor has been learned, turn ignition to OFF position. Adjust all tires to pressure listed on tire placard.

WITH PUSH-BUTTON START:


1. Press and hold the push button start until the vehicle is in accessory mode.  Note:  on Cadillac models you will know when you are in accessory mode when the Cadillac emblem appears on the DIC.
2. Press the MENU button located on the turn signal lever until ""VEHICLE INFORMATION MENU"" is displayed.
3. Once you are in the VEHICLE INFORMATION MENU, use the ^ v on the turn signal lever until
the DIC displays the vehicle's tire inflation pressures and position.
4. Press and hold the button located on the end of the turn signal lever until ""Are you sure that you want to relearn? YES or NO"" is displayed.
5. Use the ^ v on the turn signal lever to highlight YES.  Once YES is highlighted, press the button
located on the end of the turn signal lever. The horn will chirp, ""Tire Learning Active"" will be displayed on the DIC, and the left front turn signal will be illuminated.
6. Beginning with the left front tire, use a TPMS activation tool to activate the left front sensor.
Once the sensor has been activated, the horn will chirp and the right front turn signal will be illuminated. Repeat procedure in following order, right front sensor, right rear sensor, and finally the left rear sensor.  Once the left rear sensor has been activated, the horn will chirp twice. You
can then turn the vehicle off to exit ""learn mode."""  *********************
otobasics Web Developer

No comments:

Post a Comment