BMW tpms reset for 328, 330, 335, 525, 530, 550, 650, 750, M, M5, M6, X3, X5, Z4

BMW tpms reset for 328, 330, 335, 525, 530, 550, 650, 750, M, M5, M6, X3, X5, Z4

Vehicles With Set Button

When a tire pressure warning light is observed, Check and inflate tire(s) to specified pressures.  After correcting the air pressure with the engine off and the ignition on, press the “Set” button and hold (approx. 6 seconds) until:

1. • the words “Set tire pressure” appear in the instrument cluster (instrument cluster high).
   • or the yellow LED lights up (basic instrument cluster).

Vehicles With Central Information Display (CID)

Initialize the RPA in the following situations:

• • If tire pressure is changed (tire pressure is corrected or reset)

• If the position of the tires is changed (change of axles, wheels), even if the tire pressure is not changed

• If a tire is changed or the wheels are interchanged (e.g. old tires for new tires, summer tires for winter tires, etc.)

Start initialization as follows:

1. • Terminal 15 ON (engine OFF or ON, do not pull away)
   • Initialization is performed via the Central Information Display (CID) and controller.
   • • Select “RPA” in the “Settings” menu and confirm.
     • Select “Set” and confirm.
   • Drive off.  The end of the initialization phase is not indicated.

Preconditions for activation

The flat tire indicator (RPA) is automatically activated when terminal 15 is switched ON. The RPA cannot be switched off manually.

For further information and description refer to “Tire Monitoring System : Description and Operation”

Vehicles With On-Board Computer

Initialize the RPA in the following situations:

1. • If tire pressure is changed (tire pressure is corrected or reset)
   • If the position of the tires is changed (change of axles, wheels), even if the tire pressure is not changed
   • If a tire is changed or the wheels are interchanged (e.g. old tires for new tires, summer tires for winter tires, etc.)

Start initialization as follows:

1. • Terminal 15 ON (engine OFF or ON, do not pull away)
   • In the on-board computer function select “RPA” and “INIT” (LC display) with the rocker switch on the turn-signal/main-beam switch. Press the BC button to confirm.
   • • Press and hold the BC button for approx. 5 seconds, until a box with a tick appears behind the “INIT” display.
   • Drive off.  The end of the initialization phase is not indicated.

Preconditions for activation

The flat tire indicator (RPA) is automatically activated when terminal 15 is switched ON. The RPA cannot be switched off manually.

For further information and description refer to “Tire Monitoring System : Description and Operation”.

The post BMW tpms reset for 328, 330, 335, 525, 530, 550, 650, 750, M, M5, M6, X3, X5, Z4 appeared first on Seraphicguy.com.