Ford Transit TPMS Reset Guide
The Ford Transit is a range of light commercial vehicles produced by Ford since 1965. Sold primarily as a cargo van, the Transit is also built as a passenger van (marketed as the Tourneo since 1995), minibus, cutaway van chassis, and as a pickup truck. Over eight million Transit have been sold, making it the third best-selling van of all time and have been produced across four basic platform generations (debuting in 1965, 1986, 2000, and 2013 respectively), with various "facelift" versions of each.
The first product of the merged Ford of Europe, the Transit was marketed through Western Europe and Australia; by the end of the 20th century, it was marketed nearly globally with the exception of North America until 2013 when it replaced the Ford E-Series in 2015. The Transit has been the best-selling light commercial vehicle in Europe for 40 years, and in some countries the term "Transit" has passed into common usage as a generic trademark applying to any light commercial van in the Transit's size bracket. While initially designed for European consumption, the Transit is now produced in Asia, North America, and Europe for worldwide buyers. Upon production in North America, the Transit won second place in Motor Trend's 2015 'Truck of the Year' award, behind the newly introduced mid-size Chevrolet Colorado pickup and ahead of the new Ford F-150.
As of 2016, the Transit is the best-selling van in the United States, minivan sales included. The Transit drives Ford's 57 percent share of the full-size van market in the US.
1.Inflate all tires to pressure listed on tire placard.
2.Turn ignition to OFF position and press and release brake pedal.
3.Cycle ignition from OFF to RUN position 3 times, ending in RUN position.
4.Press and release brake pedal.
5.Turn ignition to OFF position.
6.Cycle ignition from OFF to RUN position 3 times, ending in RUN position.
7.Horn will sound once and TPMS telltale will blink once train mode is initiated. If equipped with message center, it will display TRAIN LF TIRE. Place antennae of learn tool on sidewall of LF tire 180° from valve stem to activate sensor. Horn will sound once sensor has been recognized. Repeat step for RF, RR, and LR tires.
8.After training LR tire, the message center will display TRAINING MODE COMPLETE. If the vehicle is not equipped with the message center display, successful completion can be verified by turning the ignition to the OFF position and not hearing the horn sound. If the horn sounds, the training procedure must be repeated.
'''''''''WITH INTEGRATED KEY FOB (ACTUAL KEY CONTAINED IN KEY FOB) PUSH-BUTTON START''''''''''''''''''''''''
1.With vehicle off, press and release the brake pedal.
2.Using the push button, press and hold the button until the vehicle is in accessory mode (ACC mode). WARNING: DO NOT PUSH AND RELEASE TOO QUICKLY…PUSH--WAIT FOR SOUND--RELEASE.
3.Power off by pushing the button 1 time.
4.Repeat 2 more times, ending in ACC mode.
5.Press and release the brake pedal, then turn vehicle off.
6.Using the push button, press and hold the button until the vehicle is in accessory mode.
7.Power off by pushing the button 1 time.
8.Repeat 2 more times, ending in ACC mode.
9.Horn will sound once the TPMS telltale will blink once train mode is initiated. If equipped with message center, it will display TRAIN LF TIRE.
10.Starting at LF tire, decrease air pressure until horn chirps. Repeat procedure for remaining tires in the following order: RF, RR, and LR. If equipped with banded sensors, place antennae of learn tool on sidewall of LF tire 180° from valve stem to activate sensor. Horn will sound once sensor has been recognized. Repeat step for RF, RR, and LR tires.
11.After successfully programming the LR tire, the message center should display "TRAINING COMPLETE."
12.Inflate all tires to pressure listed on tire placard.
''''''''''''''''WITH INTELLIGENT ASSIST IGNITION SYSTEM (NO ACTUAL KEY CONTAINED IN KEY FOB)'''''''''''''''''
1.With vehicle off, press and release the brake pedal.
2.Using the push button, press once to turn on, then press again to put vehicle into ACC mode, then press again to turn vehicle off.
3.Repeat 2 more times, ending in ACC mode.
4.Press and release the brake pedal, then turn vehicle off.
5.Using the push button, press once to turn on, then press again to put vehicle into ACC mode, then press again to turn vehicle off.
6.Repeat 2 more times, ending in ACC mode.
7.Horn will sound once and TPMS telltale will blink once train mode is initiated. If equipped with message center, it will display TRAIN LF TIRE.
8.Starting at LF tire, decrease air pressure until horn chirps. Repeat procedure for remaining tires in the following order: RF, RR, and LR. If equipped with banded sensors, place antennae of learn tool on sidewall of LF tire 180° from valve stem to activate sensor. Horn will sound once sensor has been recognized. Repeat step for RF, RR, and LR tires.
9.After successfully programming the LR tire, the message center should display "TRAINING COMPLETE."
10.Inflate all tires to pressure listed on tire placard.
No comments:
Post a Comment