Honda Civic 2006-2012 Oil Reset Guide

Honda Civic 2006-2012 Oil Reset Guide

---

PLEASE FOLLOW THE QUICK GUIDE BELOW

---

1. Turn ignition to the “RUN” position.
2. Press the “SELECT/RESET” knob until the engine life indicator is displayed.
3. Press the “SELECT/RESET” knob for more than 10 seconds, the indicator and the maintenance code(s) will blink.
4. Press the “SELECT/ RESET” knob for 5 more seconds, the maintenance code(s) will disappear and oil life will be reset to 100.
5. Turn ignition off

 

from WordPress http://ift.tt/2hHma7j
via IFTTT

Honda Civic 2001-2005 Oil Reset Guide

 

---

PLEASE FOLLOW THE SIMPLE INSTRUCTION BELOW!

---

1. Turn ignition off. Press the “SELECT” and “RESET” switches at the same time, and turn to ignition to the “ON” position.
2. Hold switches for at least 10 seconds until the indicator is reset.
3. Turn ignition off

 

from WordPress http://ift.tt/2gTXDMy
via IFTTT

Honda Civic 1990-1996 Oil Reset Guide

 

---

PLEASE FOLLOW THE SIMPLE GUIDE BELOW!

“Insert key into slot below indicator FLag on the lower right corner of the instrument cluster. Push key in until indicator changes from red to green.”

from WordPress http://ift.tt/2hn9I08
via IFTTT

Honda Civic 1997-2000 Oil Reset Guide

---

PLEASE FOLLOW THE INSTRUCTION BELOW!

With reset button on instrument panel:

1. Turn igni-tion off. Press the “SELECT” and “RESET” switches at the same time, and turn to ignition to the “RUN” position.
2. Hold switches for at least 10 seconds until the indicator is reset.
3. Turn ignition off. With key slot in instrument panel: Insert key into slot on the front of the instrument cluster. The indicator will change to green when reset.

from WordPress http://ift.tt/2hnc0wt
via IFTTT

BMW M-Series TPMS Reset Guide - Clever, Fast and Useful

BMW M-Series TPMS Reset Guide - Clever, Fast and Useful

AUTO RELEARN: Ensure all tires are inflated to the pressure listed on the tire placard.  Vehicle
must be driven for at least 10 minutes while maintaining speed above 15mph in order for the
system to learn new sensor IDs.

BMW 7 Series TPMS Reset Tutorial - Its free

BMW 7 Series TPMS Reset Tutorial - Its free

1.Inflate all tires to pressure listed on tire placard.
2.Turn ignition to ON position (engine off).
3.Press and release the MENU button on the EVIC until the message RETRAIN TIRE SENSOR- NO is displayed.   
4.Press the STEP button to select YES.
5.Press the MENU button to start the relearn process. The EVIC will display the message, TRAIN LEFT FRONT TIRE.
6.Starting at LF tire, place relearn magnet over valve stem until horn sounds.
7.After horn sounds, proceed as in step 5 for the next 3 sensors in this order:  RF, RR, LR, SP (if equipped).   
8.Once the EVIC displays the message TRAINING COMPLETE, depress the STEP, C/T, RESET, or MENU buttons to exit the relearn procedure.

BMS 6 Series TPMS Reset Guide - Simple and Effective

BMS 6 Series TPMS Reset Guide - Simple and Effective

1.Inflate all tires to pressure listed on tire placard.
2.Turn ignition to ON position (engine off).
3.Press and release the MENU button on the EVIC until the message RETRAIN TIRE SENSOR- NO is displayed.   
4.Press the STEP button to select YES.
5.Press the MENU button to start the relearn process. The EVIC will display the message, TRAIN LEFT FRONT TIRE.
6.Starting at LF tire, place relearn magnet over valve stem until horn sounds.
7.After horn sounds, proceed as in step 5 for the next 3 sensors in this order:  RF, RR, LR, SP (if equipped).   
8.Once the EVIC displays the message TRAINING COMPLETE, depress the STEP, C/T, RESET, or MENU buttons to exit the relearn procedure.

BMW 5 Series TPMS Reset Tutorial - Fast, Simple and Effective

BMW 5 Series TPMS Reset Tutorial - Fast, Simple and Effective

1.Inflate all tires to pressure listed on tire placard.
2.Turn ignition to ON position (engine off).
3.Press and release the MENU button on the EVIC until the message RETRAIN TIRE SENSOR- NO is displayed.   
4.Press the STEP button to select YES.
5.Press the MENU button to start the relearn process. The EVIC will display the message, TRAIN LEFT FRONT TIRE.
6.Starting at LF tire, place relearn magnet over valve stem until horn sounds.
7.After horn sounds, proceed as in step 5 for the next 3 sensors in this order:  RF, RR, LR, SP (if equipped).   
8.Once the EVIC displays the message TRAINING COMPLETE, depress the STEP, C/T, RESET, or MENU buttons to exit the relearn procedure.

BMW Z-Series TPMS Reset Guide - Quick and Effective

BMW Z-Series TPMS Reset Guide - Quick and Effective

1.Inflate all tires to pressure listed on tire placard.
2.Turn ignition to ON position (engine off).
3.Press and release the MENU button on the EVIC until the message RETRAIN TIRE SENSOR- NO is displayed.   
4.Press the STEP button to select YES.
5.Press the MENU button to start the relearn process. The EVIC will display the message, TRAIN LEFT FRONT TIRE.
6.Starting at LF tire, place relearn magnet over valve stem until horn sounds.
7.After horn sounds, proceed as in step 5 for the next 3 sensors in this order:  RF, RR, LR, SP (if equipped).   
8.Once the EVIC displays the message TRAINING COMPLETE, depress the STEP, C/T, RESET, or MENU buttons to exit the relearn procedure.

BMW X6 TPMS Reset Tutorial, Easy and Effective

BMW X6 TPMS Reset Tutorial, Easy and Effective

PROCEDURE NUMBER 1
1.Inflate all tires to pressure listed on tire placard.
2.Turn ignition to ON position (engine off).
3.Press and release the MENU button on the EVIC until the message RETRAIN TIRE SENSOR- NO is displayed.   
4.Press the STEP button to select YES.
5.Press the MENU button to start the relearn process. The EVIC will display the message, TRAIN LEFT FRONT TIRE.
6.Starting at LF tire, place relearn magnet over valve stem until horn sounds.
7.After horn sounds, proceed as in step 5 for the next 3 sensors in this order:  RF, RR, LR, SP (if equipped).   
8.Once the EVIC displays the message TRAINING COMPLETE, depress the STEP, C/T, RESET, or MENU buttons to exit the relearn procedure.

NOTE: USE PROCEDURE NUMBER 2 IF NUMBER 1 FAIL.
PROCEDURE NUMBER 2
AUTO RELEARN: Ensure all tires are inflated to the pressure listed on the tire placard.  Vehicle
must be driven for at least 10 minutes while maintaining speed above 15mph in order for the
system to learn new sensor IDs.

BMW X5 TPMS Reset Tutorial

BMW X5 TPMS Reset Tutorial

1.Inflate all tires to pressure listed on tire placard.
2.Turn ignition to ON position (engine off).
3.Press and release the MENU button on the EVIC until the message RETRAIN TIRE SENSOR- NO is displayed.   
4.Press the STEP button to select YES.
5.Press the MENU button to start the relearn process. The EVIC will display the message, TRAIN LEFT FRONT TIRE.
6.Starting at LF tire, place relearn magnet over valve stem until horn sounds.
7.After horn sounds, proceed as in step 5 for the next 3 sensors in this order:  RF, RR, LR, SP (if equipped).   
8.Once the EVIC displays the message TRAINING COMPLETE, depress the STEP, C/T, RESET, or MENU buttons to exit the relearn procedure.

IF THE ABOVE PROCEDURE IS NOT WORKING TO YOU PLEASE USE THE PROCEDURE BELOW!

AUTO RELEARN: Ensure all tires are inflated to the pressure listed on the tire placard.  Vehicle
must be driven for at least 10 minutes while maintaining speed above 15mph in order for the
system to learn new sensor IDs.

BMW X3 TPMs Reset Tutorial

BMW X3 TPMs Reset Tutorial

AUTO RELEARN: Ensure all tires are inflated to the pressure listed on the tire placard.  Vehicle
must be driven for at least 10 minutes while maintaining speed above 15mph in order for the
system to learn new sensor IDs.

BMW X1 TPMS Tire Pressure Monitoring System Reset Tutorial

BMW X1 TPMS Tire Pressure Monitoring System Reset Tutorial

AUTO RELEARN: Ensure all tires are inflated to the pressure listed on the tire placard.  Vehicle
must be driven for at least 10 minutes while maintaining speed above 15mph in order for the
system to learn new sensor IDs.

BMW M3 TPMS Reset Tutorial

BMW M3 TPMS Reset Tutorial

AUTO RELEARN: Ensure all tires are inflated to the pressure listed on the tire placard.  Vehicle
must be driven for at least 10 minutes while maintaining speed above 15mph in order for the
system to learn new sensor IDs.

BMW Alpina TPMS Reset Tutorial

BMW Alpina TPMS Reset Tutorial

1.Inflate all tires to pressure listed on tire placard.
2.Turn ignition to ON position (engine off).
3.Press and release the MENU button on the EVIC until the message RETRAIN TIRE SENSOR- NO is displayed.   
4.Press the STEP button to select YES.
5.Press the MENU button to start the relearn process. The EVIC will display the message, TRAIN LEFT FRONT TIRE.
6.Starting at LF tire, place relearn magnet over valve stem until horn sounds.
7.After horn sounds, proceed as in step 5 for the next 3 sensors in this order:  RF, RR, LR, SP (if equipped).   
8.Once the EVIC displays the message TRAINING COMPLETE, depress the STEP, C/T, RESET, or MENU buttons to exit the relearn procedure.

BMW 3 Series TPMS Reset Guide

BMW 3 Series TPMS Reset Guide

1.Inflate all tires to pressure listed on tire placard.
2.Turn ignition to ON position (engine off).
3.Press and release the MENU button on the EVIC until the message RETRAIN TIRE SENSOR- NO is displayed.   
4.Press the STEP button to select YES.
5.Press the MENU button to start the relearn process. The EVIC will display the message, TRAIN LEFT FRONT TIRE.
6.Starting at LF tire, place relearn magnet over valve stem until horn sounds.
7.After horn sounds, proceed as in step 5 for the next 3 sensors in this order:  RF, RR, LR, SP (if equipped).   
8.Once the EVIC displays the message TRAINING COMPLETE, depress the STEP, C/T, RESET, or MENU buttons to exit  the relearn procedure.

BMW 1 Series TPMS Reset Tutorial

The simple and easy way to reset the tire pressure monitoring system sensor light on BMW 1 Series.

PLEASE FOLLOW THE INSTRUCTION BELOW!

 

1.Inflate all tires to pressure listed on tire placard.
2.Turn ignition to ON position (engine off).
3.Press and release the MENU button on the EVIC until the message RETRAIN TIRE SENSOR- NO is displayed.  
4.Press the STEP button to select YES.
5.Press the MENU button to start the relearn process. The EVIC will display the message, TRAIN LEFT FRONT TIRE.
6.Starting at LF tire, place relearn magnet over valve stem until horn sounds.
7.After horn sounds, proceed as in step 5 for the next 3 sensors in this order:  RF, RR, LR, SP (if equipped).  
8.Once the EVIC displays the message TRAINING COMPLETE, depress the STEP, C/T, RESET, or MENU buttons to exit  the relearn procedure.

Toyota Hilux T-Belt Reset Tutorial

Simple Instruction on how to reset the timing belt (t-belt) light on Toyota Hilux.

The Toyota Hilux (also stylized as HiLux and historically as Hi-Lux) is a series of light commercial vehicles produced and marketed by the Japanese manufacturer Toyota. The majority of these vehicles were sold as pickup truck or cab chassis variants although they could be configured in a variety of body styles. Most countries used the Hilux name for the entire life of the series but in North America, the Hilux name was retired in 1976 in favor of Truck, Pickup Truck, or Compact Truck. In North America the popular option package, the SR5 (Sport Rally 5-Speed), was colloquially used as a model name for the truck, even though the option package was also used on other Toyota models like the 1972 to 1979 Corolla. In 1984, the Toyota Trekker, the camper version of the Hilux, was renamed as the 4Runner in Australia and North America, and as the Hilux Surf in Japan. In 1995, Toyota introduced a new pickup model, the Tacoma in North America, discontinuing the Hilux/Pickup there. The 4Runner is now a full SUV, and the more recent models do not resemble the Tacoma.

As of 2014, the Toyota Hilux is available worldwide, except Japan, United States, Canada, North Korea, South Korea, and India. By 2015, 16 million had been sold worldwide and almost a quarter of all European pickup sales were Hilux

---

PLEASE FOLLOW THE INSTRUCTION BELOW!

---

The timing belt light displayed on the dash on a Toyota Hilux diesel will be

reset using the following manual procedure.

1. Turn ignition on.
2. Make sure the Odometer/Trip meter display shows odometer information.
3. Turn ignition switch off.
4. Press and hold the odometer/trip display button whilst turning ignition on.
5. Hold button down for 5 seconds then release button.
6. Within 5 seconds, press and release the button.
7. The display will show the reset value.
8. Press and hold the odometer/trip button for 5 seconds then release button.
9. Make sure the odometer reading is displayed and the warning lamp has gone out.  

--Thanks

Ford Edge TPMS Reset Gudie

Ford Edge TPMS Reset Gudie

The Ford Edge is a mid-sized crossover SUV manufactured by Ford.
The first generation Edge is based on the Ford CD3 platform shared with the first generation Ford Fusion, Mazda CX-9, first & second generation Mazda 6 and Lincoln MKX.
Along with a rebadged premium variant, the Lincoln MKX, the Edge (codename U387), is manufactured at Ford's Oakville Assembly Complex in Oakville, Ontario, Canada.

'''''''''''''''''''''''''WITH STANDARD IGNITION''''''''''''''''''''''''''''''
1.Inflate all tires to pressure listed on tire placard.
2.Turn ignition to OFF position and press and release brake pedal.
3.Cycle ignition from OFF to RUN position 3 times, ending in RUN position.
4.Press and release brake pedal.
5.Turn ignition to OFF position.
6.Cycle ignition from OFF to RUN position 3 times, ending in RUN position.
7.Horn will sound once and TPMS telltale will blink once train mode is initiated.  If equipped with message center, it will display TRAIN LF TIRE. Place antennae of learn tool on sidewall of LF tire 180° from valve stem to activate sensor. Horn will sound once sensor has been recognized. Repeat step for RF, RR, and LR tires.
8.After training LR tire, the message center will display TRAINING MODE COMPLETE. If the vehicle is not equipped with the message center display, successful completion can be verified by turning the ignition to the OFF position and not hearing the horn sound. If the horn sounds, the training procedure must be repeated.

'''''''''WITH INTEGRATED KEY FOB (ACTUAL KEY CONTAINED IN KEY FOB) PUSH-BUTTON START''''''''''''''''''''''''

1.With vehicle off, press and release the brake pedal.
2.Using the push button, press and hold the button until the vehicle is in accessory mode (ACC mode). WARNING: DO NOT PUSH AND RELEASE TOO QUICKLY…PUSH--WAIT FOR SOUND--RELEASE.
3.Power off by pushing the button 1 time.
4.Repeat 2 more times, ending in ACC mode.
5.Press and release the brake pedal, then turn vehicle off.
6.Using the push button, press and hold the button until the vehicle is in accessory mode.
7.Power off by pushing the button 1 time.
8.Repeat 2 more times, ending in ACC mode.
9.Horn will sound once the TPMS telltale will blink once train mode is initiated. If equipped with message center, it will display TRAIN LF TIRE.
10.Starting at LF tire, decrease air pressure until horn chirps.  Repeat procedure for remaining tires in the following order: RF, RR, and LR. If equipped with banded sensors, place antennae of learn tool on sidewall of LF tire 180° from valve stem to activate sensor. Horn will sound once sensor has been recognized. Repeat step for RF, RR, and LR tires.
11.After successfully programming the LR tire, the message center should display "TRAINING COMPLETE."
12.Inflate all tires to pressure listed on tire placard.

''''''''''''''''WITH INTELLIGENT ASSIST IGNITION SYSTEM (NO ACTUAL KEY CONTAINED IN KEY FOB)'''''''''''''''''

1.With vehicle off, press and release the brake pedal.
2.Using the push button, press once to turn on, then press again to put vehicle into ACC mode, then press again to turn vehicle off.
3.Repeat 2 more times, ending in ACC mode.
4.Press and release the brake pedal, then turn vehicle off.
5.Using the push button, press once to turn on, then press again to put vehicle into ACC mode, then press again to turn vehicle off.
6.Repeat 2 more times, ending in ACC mode.
7.Horn will sound once and TPMS telltale will blink once train mode is initiated. If equipped with message center, it will display TRAIN LF TIRE.
8.Starting at LF tire, decrease air pressure until horn chirps.  Repeat procedure for remaining tires in the following order: RF, RR, and LR. If equipped with banded sensors, place antennae of learn tool on sidewall of LF tire 180° from valve stem to activate sensor. Horn will sound once sensor has been recognized.  Repeat step for RF, RR, and LR tires.
9.After successfully programming the LR tire, the message center should display "TRAINING COMPLETE."
10.Inflate all tires to pressure listed on tire placard.

Ford Windstar TPMS Reset Guide

Ford Windstar TPMS Reset Guide

The Ford Windstar is a minivan that was produced and sold by Ford from the 1994 to 2004 model years. The second minivan designed by the company, it marked the transition from rear-wheel drive to front-wheel drive layouts popularized by the Chrysler minivans. Serving as a replacement for the Ford Aerostar, the two minivans were sold concurrently for three model years until the 1997 discontinuation of the Aerostar. For the 2004 model year, the Windstar was renamed the Ford Freestar.

Although sold as part of the Ford car lineup, the Windstar followed a tradition set by the Aerostar by not having a Lincoln-Mercury counterpart, being completely unrelated to the Mercury Villager. The success of the Windstar led to the first Ford-developed Mercury minivan, the Mercury Monterey.

All Windstars, Freestars, and Monterey minivans were assembled in Oakville, Ontario, Canada at the Oakville Assembly Plant.

1.Inflate all tires to pressure listed on tire placard.
2.Turn ignition to ON position.
3.If not equipped with RESET button:●.Press the Trip/Odometer button until TIRE RESET or CHECK TIRE and RESET appear.●Press and hold button for 3 seconds until TPMS telltale blinks 3 times and turns off.
4.If equipped with RESET button:●Press and hold TIRE RESET (on instrument panel, behind left side of steering wheel) for 3 seconds. TPMS telltale should blink 3 times and turn off.

Ford Transit TPMS Reset Guide

Ford Transit TPMS Reset Guide

The Ford Transit is a range of light commercial vehicles produced by Ford since 1965. Sold primarily as a cargo van, the Transit is also built as a passenger van (marketed as the Tourneo since 1995), minibus, cutaway van chassis, and as a pickup truck. Over eight million Transit have been sold, making it the third best-selling van of all time and have been produced across four basic platform generations (debuting in 1965, 1986, 2000, and 2013 respectively), with various "facelift" versions of each.

The first product of the merged Ford of Europe, the Transit was marketed through Western Europe and Australia; by the end of the 20th century, it was marketed nearly globally with the exception of North America until 2013 when it replaced the Ford E-Series in 2015. The Transit has been the best-selling light commercial vehicle in Europe for 40 years, and in some countries the term "Transit" has passed into common usage as a generic trademark applying to any light commercial van in the Transit's size bracket. While initially designed for European consumption, the Transit is now produced in Asia, North America, and Europe for worldwide buyers. Upon production in North America, the Transit won second place in Motor Trend's 2015 'Truck of the Year' award, behind the newly introduced mid-size Chevrolet Colorado pickup and ahead of the new Ford F-150.

As of 2016, the Transit is the best-selling van in the United States, minivan sales included. The Transit drives Ford's 57 percent share of the full-size van market in the US.

'''''''''''''''''''''''''WITH STANDARD IGNITION''''''''''''''''''''''''''''''
1.Inflate all tires to pressure listed on tire placard.
2.Turn ignition to OFF position and press and release brake pedal.
3.Cycle ignition from OFF to RUN position 3 times, ending in RUN position.
4.Press and release brake pedal.
5.Turn ignition to OFF position.
6.Cycle ignition from OFF to RUN position 3 times, ending in RUN position.
7.Horn will sound once and TPMS telltale will blink once train mode is initiated.  If equipped with message center, it will display TRAIN LF TIRE. Place antennae of learn tool on sidewall of LF tire 180° from valve stem to activate sensor. Horn will sound once sensor has been recognized. Repeat step for RF, RR, and LR tires.
8.After training LR tire, the message center will display TRAINING MODE COMPLETE. If the vehicle is not equipped with the message center display, successful completion can be verified by turning the ignition to the OFF position and not hearing the horn sound. If the horn sounds, the training procedure must be repeated.

'''''''''WITH INTEGRATED KEY FOB (ACTUAL KEY CONTAINED IN KEY FOB) PUSH-BUTTON START''''''''''''''''''''''''

1.With vehicle off, press and release the brake pedal.
2.Using the push button, press and hold the button until the vehicle is in accessory mode (ACC mode). WARNING: DO NOT PUSH AND RELEASE TOO QUICKLY…PUSH--WAIT FOR SOUND--RELEASE.
3.Power off by pushing the button 1 time.
4.Repeat 2 more times, ending in ACC mode.
5.Press and release the brake pedal, then turn vehicle off.
6.Using the push button, press and hold the button until the vehicle is in accessory mode.
7.Power off by pushing the button 1 time.
8.Repeat 2 more times, ending in ACC mode.
9.Horn will sound once the TPMS telltale will blink once train mode is initiated. If equipped with message center, it will display TRAIN LF TIRE.
10.Starting at LF tire, decrease air pressure until horn chirps.  Repeat procedure for remaining tires in the following order: RF, RR, and LR. If equipped with banded sensors, place antennae of learn tool on sidewall of LF tire 180° from valve stem to activate sensor. Horn will sound once sensor has been recognized. Repeat step for RF, RR, and LR tires.
11.After successfully programming the LR tire, the message center should display "TRAINING COMPLETE."
12.Inflate all tires to pressure listed on tire placard.

''''''''''''''''WITH INTELLIGENT ASSIST IGNITION SYSTEM (NO ACTUAL KEY CONTAINED IN KEY FOB)'''''''''''''''''

1.With vehicle off, press and release the brake pedal.
2.Using the push button, press once to turn on, then press again to put vehicle into ACC mode, then press again to turn vehicle off.
3.Repeat 2 more times, ending in ACC mode.
4.Press and release the brake pedal, then turn vehicle off.
5.Using the push button, press once to turn on, then press again to put vehicle into ACC mode, then press again to turn vehicle off.
6.Repeat 2 more times, ending in ACC mode.
7.Horn will sound once and TPMS telltale will blink once train mode is initiated. If equipped with message center, it will display TRAIN LF TIRE.
8.Starting at LF tire, decrease air pressure until horn chirps.  Repeat procedure for remaining tires in the following order: RF, RR, and LR. If equipped with banded sensors, place antennae of learn tool on sidewall of LF tire 180° from valve stem to activate sensor. Horn will sound once sensor has been recognized.  Repeat step for RF, RR, and LR tires.
9.After successfully programming the LR tire, the message center should display "TRAINING COMPLETE."
10.Inflate all tires to pressure listed on tire placard.

Ford Taurus X TPMS Reset Guide

Ford Taurus X TPMS Reset Guide

The Ford Taurus X (originally known as Ford Freestyle) is a crossover utility vehicle that was sold by Ford from 2005 to 2009. Essentially the replacement for the Ford Taurus station wagon, the 2005-2007 Freestyle was produced in a single bodystyle with six or seven-passenger seating. As the Taurus made its return for 2008, the Freestyle was rebadged the Taurus X.

Manufactured alongside the Ford Five Hundred, Mercury Montego, Mercury Sable, and the 2008-2009 Ford Taurus, the Ford Freestyle/Taurus X shared the Volvo-derived Ford D3 platform. Front-wheel drive was standard, with all-wheel drive as an option. All versions were produced at Chicago Assembly, in Chicago, Illinois. Unlike the D3 sedans, the Freestyle/Taurus X was sold exclusively as a Ford. Following its discontinuation in 2009, it was not directly replaced, but its role in the Ford line was largely taken over by the larger Ford Flex.

The Taurus X ended production on February 27, 2009 and was marketed in the United States and Canada, as well as South Korea and the U.S. territories of Puerto Rico, U.S. Virgin Islands, and Guam.

'''''''''''''''''''''''''WITH STANDARD IGNITION''''''''''''''''''''''''''''''
1.Inflate all tires to pressure listed on tire placard.
2.Turn ignition to OFF position and press and release brake pedal.
3.Cycle ignition from OFF to RUN position 3 times, ending in RUN position.
4.Press and release brake pedal.
5.Turn ignition to OFF position.
6.Cycle ignition from OFF to RUN position 3 times, ending in RUN position.
7.Horn will sound once and TPMS telltale will blink once train mode is initiated.  If equipped with message center, it will display TRAIN LF TIRE. Place antennae of learn tool on sidewall of LF tire 180° from valve stem to activate sensor. Horn will sound once sensor has been recognized. Repeat step for RF, RR, and LR tires.
8.After training LR tire, the message center will display TRAINING MODE COMPLETE. If the vehicle is not equipped with the message center display, successful completion can be verified by turning the ignition to the OFF position and not hearing the horn sound. If the horn sounds, the training procedure must be repeated.

'''''''''WITH INTEGRATED KEY FOB (ACTUAL KEY CONTAINED IN KEY FOB) PUSH-BUTTON START''''''''''''''''''''''''

1.With vehicle off, press and release the brake pedal.
2.Using the push button, press and hold the button until the vehicle is in accessory mode (ACC mode). WARNING: DO NOT PUSH AND RELEASE TOO QUICKLY…PUSH--WAIT FOR SOUND--RELEASE.
3.Power off by pushing the button 1 time.
4.Repeat 2 more times, ending in ACC mode.
5.Press and release the brake pedal, then turn vehicle off.
6.Using the push button, press and hold the button until the vehicle is in accessory mode.
7.Power off by pushing the button 1 time.
8.Repeat 2 more times, ending in ACC mode.
9.Horn will sound once the TPMS telltale will blink once train mode is initiated. If equipped with message center, it will display TRAIN LF TIRE.
10.Starting at LF tire, decrease air pressure until horn chirps.  Repeat procedure for remaining tires in the following order: RF, RR, and LR. If equipped with banded sensors, place antennae of learn tool on sidewall of LF tire 180° from valve stem to activate sensor. Horn will sound once sensor has been recognized. Repeat step for RF, RR, and LR tires.
11.After successfully programming the LR tire, the message center should display "TRAINING COMPLETE."
12.Inflate all tires to pressure listed on tire placard.

''''''''''''''''WITH INTELLIGENT ASSIST IGNITION SYSTEM (NO ACTUAL KEY CONTAINED IN KEY FOB)'''''''''''''''''

1.With vehicle off, press and release the brake pedal.
2.Using the push button, press once to turn on, then press again to put vehicle into ACC mode, then press again to turn vehicle off.
3.Repeat 2 more times, ending in ACC mode.
4.Press and release the brake pedal, then turn vehicle off.
5.Using the push button, press once to turn on, then press again to put vehicle into ACC mode, then press again to turn vehicle off.
6.Repeat 2 more times, ending in ACC mode.
7.Horn will sound once and TPMS telltale will blink once train mode is initiated. If equipped with message center, it will display TRAIN LF TIRE.
8.Starting at LF tire, decrease air pressure until horn chirps.  Repeat procedure for remaining tires in the following order: RF, RR, and LR. If equipped with banded sensors, place antennae of learn tool on sidewall of LF tire 180° from valve stem to activate sensor. Horn will sound once sensor has been recognized.  Repeat step for RF, RR, and LR tires.
9.After successfully programming the LR tire, the message center should display "TRAINING COMPLETE."
10.Inflate all tires to pressure listed on tire placard.

Ford Ranger TPMS Reset Guide

Ford Ranger TPMS Reset Guide

The Ford Ranger is a nameplate that has been used on three distinct model lines of cars sold by Ford. Originally, the name was used by the short-lived Edsel Ranger car, then it later referred to a version of the Ford F-Series pickup truck sold in North America between model year 1965 and 1981 that denoted a styling package. Ford repurposed the name "Ranger" in 1982 for the 1983 model year for a compact pickup truck sold in North America and, later, parts of South America. Since 1998, Ford has offered a separate model of Ranger sold internationally.

'''''''''''''''''''''''''WITH STANDARD IGNITION''''''''''''''''''''''''''''''
1.Inflate all tires to pressure listed on tire placard.
2.Turn ignition to OFF position and press and release brake pedal.
3.Cycle ignition from OFF to RUN position 3 times, ending in RUN position.
4.Press and release brake pedal.
5.Turn ignition to OFF position.
6.Cycle ignition from OFF to RUN position 3 times, ending in RUN position.
7.Horn will sound once and TPMS telltale will blink once train mode is initiated.  If equipped with message center, it will display TRAIN LF TIRE. Place antennae of learn tool on sidewall of LF tire 180° from valve stem to activate sensor. Horn will sound once sensor has been recognized. Repeat step for RF, RR, and LR tires.
8.After training LR tire, the message center will display TRAINING MODE COMPLETE. If the vehicle is not equipped with the message center display, successful completion can be verified by turning the ignition to the OFF position and not hearing the horn sound. If the horn sounds, the training procedure must be repeated.

'''''''''WITH INTEGRATED KEY FOB (ACTUAL KEY CONTAINED IN KEY FOB) PUSH-BUTTON START''''''''''''''''''''''''

1.With vehicle off, press and release the brake pedal.
2.Using the push button, press and hold the button until the vehicle is in accessory mode (ACC mode). WARNING: DO NOT PUSH AND RELEASE TOO QUICKLY…PUSH--WAIT FOR SOUND--RELEASE.
3.Power off by pushing the button 1 time.
4.Repeat 2 more times, ending in ACC mode.
5.Press and release the brake pedal, then turn vehicle off.
6.Using the push button, press and hold the button until the vehicle is in accessory mode.
7.Power off by pushing the button 1 time.
8.Repeat 2 more times, ending in ACC mode.
9.Horn will sound once the TPMS telltale will blink once train mode is initiated. If equipped with message center, it will display TRAIN LF TIRE.
10.Starting at LF tire, decrease air pressure until horn chirps.  Repeat procedure for remaining tires in the following order: RF, RR, and LR. If equipped with banded sensors, place antennae of learn tool on sidewall of LF tire 180° from valve stem to activate sensor. Horn will sound once sensor has been recognized. Repeat step for RF, RR, and LR tires.
11.After successfully programming the LR tire, the message center should display "TRAINING COMPLETE."
12.Inflate all tires to pressure listed on tire placard.

''''''''''''''''WITH INTELLIGENT ASSIST IGNITION SYSTEM (NO ACTUAL KEY CONTAINED IN KEY FOB)'''''''''''''''''

1.With vehicle off, press and release the brake pedal.
2.Using the push button, press once to turn on, then press again to put vehicle into ACC mode, then press again to turn vehicle off.
3.Repeat 2 more times, ending in ACC mode.
4.Press and release the brake pedal, then turn vehicle off.
5.Using the push button, press once to turn on, then press again to put vehicle into ACC mode, then press again to turn vehicle off.
6.Repeat 2 more times, ending in ACC mode.
7.Horn will sound once and TPMS telltale will blink once train mode is initiated. If equipped with message center, it will display TRAIN LF TIRE.
8.Starting at LF tire, decrease air pressure until horn chirps.  Repeat procedure for remaining tires in the following order: RF, RR, and LR. If equipped with banded sensors, place antennae of learn tool on sidewall of LF tire 180° from valve stem to activate sensor. Horn will sound once sensor has been recognized.  Repeat step for RF, RR, and LR tires.
9.After successfully programming the LR tire, the message center should display "TRAINING COMPLETE."
10.Inflate all tires to pressure listed on tire placard.

Ford Mustang TPMS Reset Guide

Ford Mustang TPMS Reset Guide

The Ford Mustang is an American automobile manufactured by Ford. It was originally based on the platform of the second generation North American Ford Falcon, a compact car.The original 1962 Ford Mustang I two-seater concept car had evolved into the 1963 Mustang II four-seater concept car which Ford used to pretest how the public would take interest in the first production Mustang. The 1963 Mustang II concept car was designed with a variation of the production model's front and rear ends with a roof that was 2.7 inches shorter.Introduced early on April 17, 1964,and thus dubbed as a "1964½" by Mustang fans, the 1965 Mustang was the automaker's most successful launch since the Model A.The Mustang has undergone several transformations to its current sixth generation.

The Mustang created the "pony car" class of American automobiles, affordable sporty coupes with long hoods and short rear decks and gave rise to competitors such as the Chevrolet Camaro,Pontiac Firebird, AMC Javelin, Chrysler's revamped Plymouth Barracuda, and the first generation Dodge Challenger. The Mustang is also credited for inspiring the designs of coupés such as the Toyota Celica and Ford Capri, which were imported to the United States.

'''''''''''''''''''''''''WITH STANDARD IGNITION''''''''''''''''''''''''''''''

1.Inflate all tires to pressure listed on tire placard.

2.Turn ignition to OFF position and press and release brake pedal.

3.Cycle ignition from OFF to RUN position 3 times, ending in RUN position.

4.Press and release brake pedal.

5.Turn ignition to OFF position.

6.Cycle ignition from OFF to RUN position 3 times, ending in RUN position.

7.Horn will sound once and TPMS telltale will blink once train mode is initiated.  If equipped with message center, it will display TRAIN LF TIRE. Place antennae of learn tool on sidewall of LF tire 180° from valve stem to activate sensor. Horn will sound once sensor has been recognized. Repeat step for RF, RR, and LR tires.

8.After training LR tire, the message center will display TRAINING MODE COMPLETE. If the vehicle is not equipped with the message center display, successful completion can be verified by turning the ignition to the OFF position and not hearing the horn sound. If the horn sounds, the training procedure must be repeated.

'''''''''WITH INTEGRATED KEY FOB (ACTUAL KEY CONTAINED IN KEY FOB) PUSH-BUTTON START''''''''''''''''''''''''

1.With vehicle off, press and release the brake pedal.

2.Using the push button, press and hold the button until the vehicle is in accessory mode (ACC mode). WARNING: DO NOT PUSH AND RELEASE TOO QUICKLY…PUSH--WAIT FOR SOUND--RELEASE.

3.Power off by pushing the button 1 time.

4.Repeat 2 more times, ending in ACC mode.

5.Press and release the brake pedal, then turn vehicle off.

6.Using the push button, press and hold the button until the vehicle is in accessory mode.

7.Power off by pushing the button 1 time.

8.Repeat 2 more times, ending in ACC mode.

9.Horn will sound once the TPMS telltale will blink once train mode is initiated. If equipped with message center, it will display TRAIN LF TIRE.

10.Starting at LF tire, decrease air pressure until horn chirps.  Repeat procedure for remaining tires in the following order: RF, RR, and LR. If equipped with banded sensors, place antennae of learn tool on sidewall of LF tire 180° from valve stem to activate sensor. Horn will sound once sensor has been recognized. Repeat step for RF, RR, and LR tires.

11.After successfully programming the LR tire, the message center should display "TRAINING COMPLETE."

12.Inflate all tires to pressure listed on tire placard.

''''''''''''''''WITH INTELLIGENT ASSIST IGNITION SYSTEM (NO ACTUAL KEY CONTAINED IN KEY FOB)'''''''''''''''''

1.With vehicle off, press and release the brake pedal.

2.Using the push button, press once to turn on, then press again to put vehicle into ACC mode, then press again to turn vehicle off.

3.Repeat 2 more times, ending in ACC mode.

4.Press and release the brake pedal, then turn vehicle off.

5.Using the push button, press once to turn on, then press again to put vehicle into ACC mode, then press again to turn vehicle off.

6.Repeat 2 more times, ending in ACC mode.

7.Horn will sound once and TPMS telltale will blink once train mode is initiated. If equipped with message center, it will display TRAIN LF TIRE.

8.Starting at LF tire, decrease air pressure until horn chirps.  Repeat procedure for remaining tires in the following order: RF, RR, and LR. If equipped with banded sensors, place antennae of learn tool on sidewall of LF tire 180° from valve stem to activate sensor. Horn will sound once sensor has been recognized.  Repeat step for RF, RR, and LR tires.

9.After successfully programming the LR tire, the message center should display "TRAINING COMPLETE."

10.Inflate all tires to pressure listed on tire placard.

Ford Fusion TPMS Reset Guide

Ford Fusion TPMS Reset Guide

The Ford Fusion is a four-door, five passenger mid-size sedan manufactured and marketed by Ford across two generations in gasoline and gas/electric hybrid variants. Introduced for model year 2006, the Fusion is manufactured at Ford's Hermosillo Stamping & Assembly plant along with its rebadged variant the Lincoln MKZ — and formerly with its now discontinued rebadged variant, the Mercury Milan, all sharing the CD3 platform.

Production on the first Fusions began on August 1, 2005. The Fusion replaced the Mondeo for the Latin American markets—except in Argentina (where the current European Mondeo is available) and in the United States and Canada (where it superseded the then mid-size Taurus and the compact Contour). The Fusion is positioned between the compact Ford Focus and full-size Ford Taurus.In the Middle East, this model is sold alongside the Mondeo. Versions sold there are available only with the 2.5-litre engine. Unlike in the United States, Canada and Latin America, no V6 engine is available in that region.The same is true in South Korea, where only the 2.5-liter engines (including those for the hybrid model) are available as of the 2012 model year.

The second generation line-up includes a gasoline engine option, an EcoBoost engine option, a next-generation hybrid model, and a plug-in hybrid version, the Ford Fusion Energi, making the Ford Fusion the first production sedan to offer these four options. Sales of the gasoline-powered and hybrid versions began in the U.S. in October 2012 under the 2013 model. Sales in Europe and Asia, as Ford Mondeo, are expected to begin in 2015, along with South Africa, where the Fusion name will be used. Deliveries of the Fusion Energi began in the U.S. in February 2013. The entire 2013 Ford Fusion line-up was awarded with the 2013 Green Car of the Year at the 2012 Los Angeles Auto Show.

'''''''''''''''''''''''''WITH STANDARD IGNITION''''''''''''''''''''''''''''''
1.Inflate all tires to pressure listed on tire placard.
2.Turn ignition to OFF position and press and release brake pedal.
3.Cycle ignition from OFF to RUN position 3 times, ending in RUN position.
4.Press and release brake pedal.
5.Turn ignition to OFF position.
6.Cycle ignition from OFF to RUN position 3 times, ending in RUN position.
7.Horn will sound once and TPMS telltale will blink once train mode is initiated.  If equipped with message center, it will display TRAIN LF TIRE. Place antennae of learn tool on sidewall of LF tire 180° from valve stem to activate sensor. Horn will sound once sensor has been recognized. Repeat step for RF, RR, and LR tires.
8.After training LR tire, the message center will display TRAINING MODE COMPLETE. If the vehicle is not equipped with the message center display, successful completion can be verified by turning the ignition to the OFF position and not hearing the horn sound. If the horn sounds, the training procedure must be repeated.

'''''''''WITH INTEGRATED KEY FOB (ACTUAL KEY CONTAINED IN KEY FOB) PUSH-BUTTON START''''''''''''''''''''''''

1.With vehicle off, press and release the brake pedal.
2.Using the push button, press and hold the button until the vehicle is in accessory mode (ACC mode). WARNING: DO NOT PUSH AND RELEASE TOO QUICKLY…PUSH--WAIT FOR SOUND--RELEASE.
3.Power off by pushing the button 1 time.
4.Repeat 2 more times, ending in ACC mode.
5.Press and release the brake pedal, then turn vehicle off.
6.Using the push button, press and hold the button until the vehicle is in accessory mode.
7.Power off by pushing the button 1 time.
8.Repeat 2 more times, ending in ACC mode.
9.Horn will sound once the TPMS telltale will blink once train mode is initiated. If equipped with message center, it will display TRAIN LF TIRE.
10.Starting at LF tire, decrease air pressure until horn chirps.  Repeat procedure for remaining tires in the following order: RF, RR, and LR. If equipped with banded sensors, place antennae of learn tool on sidewall of LF tire 180° from valve stem to activate sensor. Horn will sound once sensor has been recognized. Repeat step for RF, RR, and LR tires.
11.After successfully programming the LR tire, the message center should display "TRAINING COMPLETE."
12.Inflate all tires to pressure listed on tire placard.

''''''''''''''''WITH INTELLIGENT ASSIST IGNITION SYSTEM (NO ACTUAL KEY CONTAINED IN KEY FOB)'''''''''''''''''

1.With vehicle off, press and release the brake pedal.
2.Using the push button, press once to turn on, then press again to put vehicle into ACC mode, then press again to turn vehicle off.
3.Repeat 2 more times, ending in ACC mode.
4.Press and release the brake pedal, then turn vehicle off.
5.Using the push button, press once to turn on, then press again to put vehicle into ACC mode, then press again to turn vehicle off.
6.Repeat 2 more times, ending in ACC mode.
7.Horn will sound once and TPMS telltale will blink once train mode is initiated. If equipped with message center, it will display TRAIN LF TIRE.
8.Starting at LF tire, decrease air pressure until horn chirps.  Repeat procedure for remaining tires in the following order: RF, RR, and LR. If equipped with banded sensors, place antennae of learn tool on sidewall of LF tire 180° from valve stem to activate sensor. Horn will sound once sensor has been recognized.  Repeat step for RF, RR, and LR tires.
9.After successfully programming the LR tire, the message center should display "TRAINING COMPLETE."
10.Inflate all tires to pressure listed on tire placard.

Ford Freestar TPMS Reset Guide

Ford Freestar TPMS Reset Guide

The Ford Windstar is a minivan that was produced and sold by Ford from the 1994 to 2004 model years. The second minivan designed by the company, it marked the transition from rear-wheel drive to front-wheel drive layouts popularized by the Chrysler minivans. Serving as a replacement for the Ford Aerostar, the two minivans were sold concurrently for three model years until the 1997 discontinuation of the Aerostar. For the 2004 model year, the Windstar was renamed the Ford Freestar.

Although sold as part of the Ford car lineup, the Windstar followed a tradition set by the Aerostar by not having a Lincoln-Mercury counterpart, being completely unrelated to the Mercury Villager. The success of the Windstar led to the first Ford-developed Mercury minivan, the Mercury Monterey.

All Windstars, Freestars, and Monterey minivans were assembled in Oakville, Ontario, Canada at the Oakville Assembly Plant.

'''''''''''''''''''''''''WITH STANDARD IGNITION''''''''''''''''''''''''''''''
1.Inflate all tires to pressure listed on tire placard.
2.Turn ignition to OFF position and press and release brake pedal.
3.Cycle ignition from OFF to RUN position 3 times, ending in RUN position.
4.Press and release brake pedal.
5.Turn ignition to OFF position.
6.Cycle ignition from OFF to RUN position 3 times, ending in RUN position.
7.Horn will sound once and TPMS telltale will blink once train mode is initiated.  If equipped with message center, it will display TRAIN LF TIRE. Place antennae of learn tool on sidewall of LF tire 180° from valve stem to activate sensor. Horn will sound once sensor has been recognized. Repeat step for RF, RR, and LR tires.
8.After training LR tire, the message center will display TRAINING MODE COMPLETE. If the vehicle is not equipped with the message center display, successful completion can be verified by turning the ignition to the OFF position and not hearing the horn sound. If the horn sounds, the training procedure must be repeated.

'''''''''WITH INTEGRATED KEY FOB (ACTUAL KEY CONTAINED IN KEY FOB) PUSH-BUTTON START''''''''''''''''''''''''

1.With vehicle off, press and release the brake pedal.
2.Using the push button, press and hold the button until the vehicle is in accessory mode (ACC mode). WARNING: DO NOT PUSH AND RELEASE TOO QUICKLY…PUSH--WAIT FOR SOUND--RELEASE.
3.Power off by pushing the button 1 time.
4.Repeat 2 more times, ending in ACC mode.
5.Press and release the brake pedal, then turn vehicle off.
6.Using the push button, press and hold the button until the vehicle is in accessory mode.
7.Power off by pushing the button 1 time.
8.Repeat 2 more times, ending in ACC mode.
9.Horn will sound once the TPMS telltale will blink once train mode is initiated. If equipped with message center, it will display TRAIN LF TIRE.
10.Starting at LF tire, decrease air pressure until horn chirps.  Repeat procedure for remaining tires in the following order: RF, RR, and LR. If equipped with banded sensors, place antennae of learn tool on sidewall of LF tire 180° from valve stem to activate sensor. Horn will sound once sensor has been recognized. Repeat step for RF, RR, and LR tires.
11.After successfully programming the LR tire, the message center should display "TRAINING COMPLETE."
12.Inflate all tires to pressure listed on tire placard.

''''''''''''''''WITH INTELLIGENT ASSIST IGNITION SYSTEM (NO ACTUAL KEY CONTAINED IN KEY FOB)'''''''''''''''''

1.With vehicle off, press and release the brake pedal.
2.Using the push button, press once to turn on, then press again to put vehicle into ACC mode, then press again to turn vehicle off.
3.Repeat 2 more times, ending in ACC mode.
4.Press and release the brake pedal, then turn vehicle off.
5.Using the push button, press once to turn on, then press again to put vehicle into ACC mode, then press again to turn vehicle off.
6.Repeat 2 more times, ending in ACC mode.
7.Horn will sound once and TPMS telltale will blink once train mode is initiated. If equipped with message center, it will display TRAIN LF TIRE.
8.Starting at LF tire, decrease air pressure until horn chirps.  Repeat procedure for remaining tires in the following order: RF, RR, and LR. If equipped with banded sensors, place antennae of learn tool on sidewall of LF tire 180° from valve stem to activate sensor. Horn will sound once sensor has been recognized.  Repeat step for RF, RR, and LR tires.
9.After successfully programming the LR tire, the message center should display "TRAINING COMPLETE."
10.Inflate all tires to pressure listed on tire placard.

---

IF THE ABOVE TUTORIAL WILL NOT WORK., PLEASE FOLLOW THE INSTRUCTION BELOW!

---

1.Inflate all tires to pressure listed on tire placard. For models without message center
2.Press and hold odometer reset button until TIRE PRESSURE SET is displayed.
3.Hold button for 3 more seconds.
4.TPMS telltale will then begin to blink to signal completion of reset process. For models with message center:
5.Press and hold SETUP button until RESET FOR SYSTEM CHECK is displayed.
6.Press and hold RESET button until HOLD RESET TO RELEARN is displayed.
7.Press and hold RESET button for 3 seconds.
8.TPMS telltale and HOLD RESET TO RELEARN message will blink 3 times to signal completion

Ford Focus TPMS Reset Guide

Ford Focus TPMS Reset Guide

The Ford Focus is a compact car (C-segment in Europe) manufactured by the Ford Motor Company since 1998. Ford began sales of the Focus to Europe in July 1998 and in North America during 1999 for the 2000 model year.

For decades, in the U.S., small cars like the Ford Focus were seen as a tool to draw in younger buyers looking for a cheap basic transportation and to increase auto makers' fleet average fuel economies to meet U.S. federal standards.[1] Ford was said not to concern about losing money on the Focus so the company could sell gas guzzlers for big profits. Many industry insiders also view cars like the Focus as 'compliance car' because of their role in helping to bring down the corporate fleet average fuel economy to meet current fuel-economy standards.

In Europe, North and South America, and South Africa, the Focus replaced the various versions of the Ford Escort and Ford Laser sold in those markets. In Asia and Australasia, it replaced the Ford Laser. As of the first half of 2012, the Focus surpassed the Toyota Corolla to become the world's best selling automobile nameplate.

'''''''''''''''''''''''''WITH STANDARD IGNITION''''''''''''''''''''''''''''''
1.Inflate all tires to pressure listed on tire placard.
2.Turn ignition to OFF position and press and release brake pedal.
3.Cycle ignition from OFF to RUN position 3 times, ending in RUN position.
4.Press and release brake pedal.
5.Turn ignition to OFF position.
6.Cycle ignition from OFF to RUN position 3 times, ending in RUN position.
7.Horn will sound once and TPMS telltale will blink once train mode is initiated.  If equipped with message center, it will display TRAIN LF TIRE. Place antennae of learn tool on sidewall of LF tire 180° from valve stem to activate sensor. Horn will sound once sensor has been recognized. Repeat step for RF, RR, and LR tires.
8.After training LR tire, the message center will display TRAINING MODE COMPLETE. If the vehicle is not equipped with the message center display, successful completion can be verified by turning the ignition to the OFF position and not hearing the horn sound. If the horn sounds, the training procedure must be repeated.

'''''''''WITH INTEGRATED KEY FOB (ACTUAL KEY CONTAINED IN KEY FOB) PUSH-BUTTON START''''''''''''''''''''''''

1.With vehicle off, press and release the brake pedal.
2.Using the push button, press and hold the button until the vehicle is in accessory mode (ACC mode). WARNING: DO NOT PUSH AND RELEASE TOO QUICKLY…PUSH--WAIT FOR SOUND--RELEASE.
3.Power off by pushing the button 1 time.
4.Repeat 2 more times, ending in ACC mode.
5.Press and release the brake pedal, then turn vehicle off.
6.Using the push button, press and hold the button until the vehicle is in accessory mode.
7.Power off by pushing the button 1 time.
8.Repeat 2 more times, ending in ACC mode.
9.Horn will sound once the TPMS telltale will blink once train mode is initiated. If equipped with message center, it will display TRAIN LF TIRE.
10.Starting at LF tire, decrease air pressure until horn chirps.  Repeat procedure for remaining tires in the following order: RF, RR, and LR. If equipped with banded sensors, place antennae of learn tool on sidewall of LF tire 180° from valve stem to activate sensor. Horn will sound once sensor has been recognized. Repeat step for RF, RR, and LR tires.
11.After successfully programming the LR tire, the message center should display "TRAINING COMPLETE."
12.Inflate all tires to pressure listed on tire placard.

''''''''''''''''WITH INTELLIGENT ASSIST IGNITION SYSTEM (NO ACTUAL KEY CONTAINED IN KEY FOB)'''''''''''''''''

1.With vehicle off, press and release the brake pedal.
2.Using the push button, press once to turn on, then press again to put vehicle into ACC mode, then press again to turn vehicle off.
3.Repeat 2 more times, ending in ACC mode.
4.Press and release the brake pedal, then turn vehicle off.
5.Using the push button, press once to turn on, then press again to put vehicle into ACC mode, then press again to turn vehicle off.
6.Repeat 2 more times, ending in ACC mode.
7.Horn will sound once and TPMS telltale will blink once train mode is initiated. If equipped with message center, it will display TRAIN LF TIRE.
8.Starting at LF tire, decrease air pressure until horn chirps.  Repeat procedure for remaining tires in the following order: RF, RR, and LR. If equipped with banded sensors, place antennae of learn tool on sidewall of LF tire 180° from valve stem to activate sensor. Horn will sound once sensor has been recognized.  Repeat step for RF, RR, and LR tires.
9.After successfully programming the LR tire, the message center should display "TRAINING COMPLETE."
10.Inflate all tires to pressure listed on tire placard.

Ford Flex TPMS Reset Guide

Ford Flex TPMS Reset Guide

The Ford Flex is a full-size crossover utility vehicle [3] manufactured by the Ford Motor Company since the 2009 model year. The Flex supersedes the Ford Taurus X and Freestyle, sharing their drivetrains and using an updated platform.

The Flex is manufactured alongside the Ford Edge and Lincoln MKX mid-size CUVs at the Oakville Assembly plant in Oakville, Ontario, where the first Flex manufactured at the beginning of June 2008.

The Flex is directly related to a group of rebadged variants, Ford's Chicago D4's, so called for the plant where they were manufactured (Oakville Assembly) and the platform (D4) they share: the Ford Explorer and Lincoln MKT. The Flex is closely related to Ford's Chicago D3's: the Mercury Montego and third generation Mercury Sable sedans; the Ford Freestyle and Taurus X wagons, marketed as a crossover vehicles; as well as the fifth and sixth generations Ford Taurus and Lincoln MKS.

Noted for styling by Peter Horbury that recalls the MINI, and a series of horizontal grooves in its doors and tailgate evoking a Woodie, the Flex is marketed in the United States, in Canada and in the Middle East.

'''''''''''''''''''''''''WITH STANDARD IGNITION''''''''''''''''''''''''''''''
1.Inflate all tires to pressure listed on tire placard.
2.Turn ignition to OFF position and press and release brake pedal.
3.Cycle ignition from OFF to RUN position 3 times, ending in RUN position.
4.Press and release brake pedal.
5.Turn ignition to OFF position.
6.Cycle ignition from OFF to RUN position 3 times, ending in RUN position.
7.Horn will sound once and TPMS telltale will blink once train mode is initiated.  If equipped with message center, it will display TRAIN LF TIRE. Place antennae of learn tool on sidewall of LF tire 180° from valve stem to activate sensor. Horn will sound once sensor has been recognized. Repeat step for RF, RR, and LR tires.
8.After training LR tire, the message center will display TRAINING MODE COMPLETE. If the vehicle is not equipped with the message center display, successful completion can be verified by turning the ignition to the OFF position and not hearing the horn sound. If the horn sounds, the training procedure must be repeated.

'''''''''WITH INTEGRATED KEY FOB (ACTUAL KEY CONTAINED IN KEY FOB) PUSH-BUTTON START''''''''''''''''''''''''

1.With vehicle off, press and release the brake pedal.
2.Using the push button, press and hold the button until the vehicle is in accessory mode (ACC mode). WARNING: DO NOT PUSH AND RELEASE TOO QUICKLY…PUSH--WAIT FOR SOUND--RELEASE.
3.Power off by pushing the button 1 time.
4.Repeat 2 more times, ending in ACC mode.
5.Press and release the brake pedal, then turn vehicle off.
6.Using the push button, press and hold the button until the vehicle is in accessory mode.
7.Power off by pushing the button 1 time.
8.Repeat 2 more times, ending in ACC mode.
9.Horn will sound once the TPMS telltale will blink once train mode is initiated. If equipped with message center, it will display TRAIN LF TIRE.
10.Starting at LF tire, decrease air pressure until horn chirps.  Repeat procedure for remaining tires in the following order: RF, RR, and LR. If equipped with banded sensors, place antennae of learn tool on sidewall of LF tire 180° from valve stem to activate sensor. Horn will sound once sensor has been recognized. Repeat step for RF, RR, and LR tires.
11.After successfully programming the LR tire, the message center should display "TRAINING COMPLETE."
12.Inflate all tires to pressure listed on tire placard.

''''''''''''''''WITH INTELLIGENT ASSIST IGNITION SYSTEM (NO ACTUAL KEY CONTAINED IN KEY FOB)'''''''''''''''''

1.With vehicle off, press and release the brake pedal.
2.Using the push button, press once to turn on, then press again to put vehicle into ACC mode, then press again to turn vehicle off.
3.Repeat 2 more times, ending in ACC mode.
4.Press and release the brake pedal, then turn vehicle off.
5.Using the push button, press once to turn on, then press again to put vehicle into ACC mode, then press again to turn vehicle off.
6.Repeat 2 more times, ending in ACC mode.
7.Horn will sound once and TPMS telltale will blink once train mode is initiated. If equipped with message center, it will display TRAIN LF TIRE.
8.Starting at LF tire, decrease air pressure until horn chirps.  Repeat procedure for remaining tires in the following order: RF, RR, and LR. If equipped with banded sensors, place antennae of learn tool on sidewall of LF tire 180° from valve stem to activate sensor. Horn will sound once sensor has been recognized.  Repeat step for RF, RR, and LR tires.
9.After successfully programming the LR tire, the message center should display "TRAINING COMPLETE."
10.Inflate all tires to pressure listed on tire placard.