Chrysler Crossfire Manual Oil Reset Guide

Chrysler Crossfire Manual Oil Reset Guide

2004

1)Turn on the ignition switch to the run position.

2)Press the RESET button fortrip odometertwice

within 1 second. Display for FSS service request

is activated in 10 seconds.

3)Move the ignition switch to the off position

while the display is active.

4)Press RESET button for the trip odometer and

hold it as you turn on the run position.

5)Press and hold the TRIP ODOMETER

button(about 10 seconds) until a sound is heard

and the new start distance appears in display.

2005

1)Press and hold the knob/button.While turning

the key to ON/RUN again.The present status for

days or distance is displayed once more.

2)Continue to hold the knob/button.A1’ter

approximately 10 seconds,a single sounds and

the display shows 7,000 miles(Canada:11,000km)

for approximately 10 seconds.

2006-2008

1.Turn the ignition to run (one position before

starting engine).

2.Within one second press the knobfbutton

twice.

3.The present status for days or distance is

displayed. Within 10 seconds turn the key to

OFF/LOCK.

4.Press and hold the knob/button, while turning

the distance is displayed once more. Continue to

hold the knob/button. After 10 seconds, a signal

sounds and the display shows 7,000 mi or

11000km for 10 seconds.

5.Re|ease the knob/button.

6.Turn the ignition off and then start the engine

to verify the indicator has been reset.