TPMS Reset Honda Tire Pressure Monitoring System Reset

TPMS Reset Honda Tire Pressure Monitoring System Reset

Honda Accord 2008-2012 Tpms Reset - Tire Pressure Monitoring System Reset
 1. A properly formatted scan tool is required to learn new sensor IDs when replacing sensors.
2. After sensor IDs are registered to vehicle, the MIL will flash until the vehicle is driven and the sensors IDs are received by the vehicle.
3. This process could take 1-1 O miles of continuous driving.


Honda Accord 2013-2015 Tpms Reset - Tire Pressure Monitoring System Reset
Models with Information Display:

1. Ensure all tires are inflated to pressure listed on vehicle placard.
2. With manual transmission, ensure the shift lever is in N. For automatic transmission/CVT models, ensure the shift lever is in P.
3. Ignition switch in the ON/RUN position (engine off).
4. Press and hold the TPMS button (located on lower left knee bolster) until the low tire pressure/TPMS indicator blinks twice.
5. If the low tire pressure/TPMS indicator does not blink, confirm the above conditions and hold the TPMS button again. The calibration process finishes automatically.

Models with Multi-information Display

1. Press (UP) (INFO) (DOWN) button to select Vehicle Settings, then press the SEURESET button, and TPMS Calibration appears on the display.
2. Press the SEURESET button. Cancel and Calibrate appear on the screen.
3. Use the up/down arrows from step one to select Calibrate, and then press the SEURESET button.
4. Calibration Started appears on screen, and the calibration process finishes automatically.

Honda Accord Crosstour 2010-2015 Tpms Reset - Tire Pressure Monitoring System Reset
1. A properly formatted scan tool is required to learn new sensor IDs when replacing sensors.
2. After sensor IDs are registered to vehicle, the MIL will flash until the vehicle is driven and the sensors IDs are received by the vehicle.
3. This process could take 1-1 O miles of continuous driving.

Honda Civic 2008-2013 - Tire Pressure Monitoring System Reset
1. A properly formatted scan tool is required to learn new sensor IDs when replacing sensors.
2. After sensor IDs are registered to vehicle, the MIL will flash until the vehicle is driven and the sensors IDs are received by the vehicle.
3. This process could take 1-1 O miles of continuous driving.

Honda Civic 2014-2015 Tpms Reset - Tire Pressure Monitoring System Reset
Models with Information Display:

1. Ensure all tires are inflated to pressure listed on vehicle placard.
2. With manual transmission, ensure the shift lever is in N. For automatic transmission/CVT models, ensure the shift lever is in P.
3. Ignition switch in the ON/RUN position (engine off).
4. Press and hold the TPMS button (located on lower left knee bolster) until the low tire pressure/TPMS indicator blinks twice.
5. If the low tire pressure/TPMS indicator does not blink, confirm the above conditions and hold the TPMS button again. The calibration process finishes automatically.

Models with Multi-information Display

1. Press (UP) (INFO) (DOWN) button to select Vehicle Settings, then press the SEURESET button, and TPMS Calibration appears on the display.
2. Press the SEURESET button. Cancel and Calibrate appear on the screen.
3. Use the up/down arrows from step one to select Calibrate, and then press the SEURESET button.
4. Calibration Started appears on screen, and the calibration process finishes automatically.

Honda Crosstour 2010-2015 Tpms Reset - Tire Pressure Monitoring System Reset
1. A properly formatted scan tool is required to learn new sensor IDs when replacing sensors.
2. After sensor IDs are registered to vehicle, the MIL will flash until the vehicle is driven and the sensors IDs are received by the vehicle.
3. This process could take 1-1 O miles of continuous driving.

Honda Crosstour 2010-2015 Tpms Reset - Tire Pressure Monitoring System Reset
1. A properly formatted scan tool is required to learn new sensor IDs when replacing sensors.
2. After sensor IDs are registered to vehicle, the MIL will flash until the vehicle is driven and the sensors IDs are received by the vehicle.
3. This process could take 1-1 O miles of continuous driving.

Honda CR-V 2007-2013 Tpms Reset - Tire Pressure Monitoring System Reset
1. A properly formatted scan tool is required to learn new sensor IDs when replacing sensors.
2. After sensor IDs are registered to vehicle, the MIL will flash until the vehicle is driven and the sensors IDs are received by the vehicle.
3. This process could take 1-1 O miles of continuous driving.

Honda CR-Z 2011-2015 Tpms Reset - Tire Pressure Monitoring System Reset
Models with Information Display:

1. Ensure all tires are inflated to pressure listed on vehicle placard.
2. With manual transmission, ensure the shift lever is in N. For automatic transmission/CVT models, ensure the shift lever is in P.
3. Ignition switch in the ON/RUN position (engine off).
4. Press and hold the TPMS button (located on lower left knee bolster) until the low tire pressure/TPMS indicator blinks twice.
5. If the low tire pressure/TPMS indicator does not blink, confirm the above conditions and hold the TPMS button again. The calibration process finishes automatically.

Models with Multi-information Display

1. Press (UP) (INFO) (DOWN) button to select Vehicle Settings, then press the SEURESET button, and TPMS Calibration appears on the display.
2. Press the SEURESET button. Cancel and Calibrate appear on the screen.
3. Use the up/down arrows from step one to select Calibrate, and then press the SEURESET button.
4. Calibration Started appears on screen, and the calibration process finishes automatically.

Honda Element 2006-2008 Tpms Reset - Tire Pressure Monitoring System Reset
1. A properly formatted scan tool is required to learn new sensor IDs when replacing sensors.
2. After sensor IDs are registered to vehicle, the MIL will flash until the vehicle is driven and the sensors IDs are received by the vehicle.
3. This process could take 1-1 O miles of continuous driving.

Honda Fit  2015 Tpms Reset - Tire Pressure Monitoring System Reset
Models with Information Display:

1. Ensure all tires are inflated to pressure listed on vehicle placard.
2. With manual transmission, ensure the shift lever is in N. For automatic transmission/CVT models, ensure the shift lever is in P.
3. Ignition switch in the ON/RUN position (engine off).
4. Press and hold the TPMS button (located on lower left knee bolster) until the low tire pressure/TPMS indicator blinks twice.
5. If the low tire pressure/TPMS indicator does not blink, confirm the above conditions and hold the TPMS button again. The calibration process finishes automatically.

Models with Multi-information Display

1. Press (UP) (INFO) (DOWN) button to select Vehicle Settings, then press the SEURESET button, and TPMS Calibration appears on the display.
2. Press the SEURESET button. Cancel and Calibrate appear on the screen.
3. Use the up/down arrows from step one to select Calibrate, and then press the SEURESET button.
4. Calibration Started appears on screen, and the calibration process finishes automatically.

Honda Fit 2008-2014 Tpms Reset - Tire Pressure Monitoring System Reset
1. A properly formatted scan tool is required to learn new sensor IDs when replacing sensors.
2. After sensor IDs are registered to vehicle, the MIL will flash until the vehicle is driven and the sensors IDs are received by the vehicle.
3. This process could take 1-1 O miles of continuous driving.

Honda Insight 2010-2014 Tpms Reset - Tire Pressure Monitoring System Reset
1. A properly formatted scan tool is required to learn new sensor IDs when replacing sensors.
2. After sensor IDs are registered to vehicle, the MIL will flash until the vehicle is driven and the sensors IDs are received by the vehicle.
3. This process could take 1-1 O miles of continuous driving.

Honda Odyssey  2007-2010 Tpms Reset - Tire Pressure Monitoring System Reset
1. A properly formatted scan tool is required to learn new sensor IDs when replacing sensors.
2. After sensor IDs are registered to vehicle, the MIL will flash until the vehicle is driven and the sensors IDs are received by the vehicle.
3. This process could take 1-1 O miles of continuous driving.

Honda Odyssey  2008-2010 Tpms Reset - Tire Pressure Monitoring System Reset
Ensure all tires are inflated to the pressure listed on the tire placard.
Drive vehicle at speeds above 15 mph for a minimum of 40 seconds. Sensor ID's will be learned automatically.
This process could take 1-10 miles of continuous driving.

Honda Odyssey 2005-2007 Tpms Reset - Tire Pressure Monitoring System Reset
1. A properly formatted scan tool is required to learn new sensor IDs when replacing sensors.
2. After sensor IDs are registered to vehicle, the MIL will flash until the vehicle is driven and the sensors IDs are received by the vehicle.
3. This process could take 1-1 O miles of continuous driving.

Honda Odyssey 2011-2015 Tpms Reset - Tire Pressure Monitoring System Reset
1. A properly formatted scan tool is required to learn new sensor IDs when replacing sensors.
2. After sensor IDs are registered to vehicle, the MIL will flash until the vehicle is driven and the sensors IDs are received by the vehicle.
3. This process could take 1-1 O miles of continuous driving.

Honda Pilot 2005-2008 Tpms Reset - Tire Pressure Monitoring System Reset
Ensure all tires are inflated to the pressure listed on the tire placard.
Drive vehicle at speeds above 15 mph for a minimum of 40 seconds. Sensor ID's will be learned automatically.
This process could take 1-10 miles of continuous driving.

Honda Pilot 2009-2015 Tpms Reset - Tire Pressure Monitoring System Reset
1. A properly formatted scan tool is required to learn new sensor IDs when replacing sensors.
2. After sensor IDs are registered to vehicle, the MIL will flash until the vehicle is driven and the sensors IDs are received by the vehicle.
3. This process could take 1-1 O miles of continuous driving.

Honda Ridgeline 2006-2014 Tpms Reset - Tire Pressure Monitoring System Reset
Ensure all tires are inflated to the pressure listed on the tire placard.
Drive vehicle at speeds above 15 mph for a minimum of 40 seconds. Sensor ID's will be learned automatically.
This process could take 1-10 miles of continuous driving.

Honda S2000 2008-2009 Tpms Reset - Tire Pressure Monitoring System Reset
1. A properly formatted scan tool is required to learn new sensor IDs when replacing sensors.
2. After sensor IDs are registered to vehicle, the MIL will flash until the vehicle is driven and the sensors IDs are received by the vehicle.
3. This process could take 1-1 O miles of continuous driving.