TPMS Reset Freightliner Sprinter Tire Pressure Monitoring System Reset Guide
Reset Air Pressure
1. Inflate all tires to pressure indicated on tire placard.
2. Turn ignition to ON/RUN position (engine off).
3. Press forward/back button on steering wheel until trip and odometer are displayed.
4. Press UP/DOWN button until tire inflation pressure monitor is displayed.
5. Hold down reset button (located on instrument cluster) until MONITOR CURRENT TIRE PRESSURE? is displayed.
6. Press+ button, TIRE PRESS. MONITOR-ACTIVATED!-PRESS. DISPLAY AFTER DRIVING A FEW MINS. is displayed.
7. If REACTIVATE-TIRE PRESS. MONITOR! appears, repeat relearn procedure.
8. If TIRE PRESSURE-CHECK TIRES! appears, indicates tire pressure too low, adjust pressures accordingly.
Relearn New Sensor IDs
1. Ensure all tires are inflated to the pressure listed on the tire placard.
2. Vehicle must be driven for at least 1 o minutes while maintaining speed above 15mph in order for system to learn new sensor IDs.
3. If spare tire sensor ID is being programmed, a properly formatted scan tool is necessary.
Thank you so much for the post you do. I like your post and all you share with us is up to date and quite informative, i would like to bookmark the page so i can come here again to read you, as you have done a wonderful job. Tire Pressure
ReplyDelete