TPMS Reset- Bmw Cars Tpms Reset Guide

TPMS Reset- Bmw Cars Tpms Reset Guide

QUICK INFOMATION ABOUT BMW MANUFACTURER:

BMW  

Bayerische Motoren Werke

BMW AG is a Germany-based company which currently produces automobiles and motorcycles, and produced aircraft engines until 1945.

The company was founded in 1916 and has its headquarters in Munich, Bavaria. BMW produces motor vehicles in Germany, Brazil, China, India, South Africa and the United States. In 2015, BMW was the world's twelfth largest producer of motor vehicles, with 2,279,503 vehicles produced.The Quandt family are long-term shareholders of the company, with the remaining stocks owned by public float.

Automobiles are marketed under the brands BMW (with sub-brands BMW M for performance models and BMW i for plug-in electric cars), Mini and Rolls-Royce. Motorcycles are marketed under the brand BMW Motorrad.

The company has significant motorsport history, especially in touring cars, Formula 1, sports cars and the Isle of Man TT.

BELOW ARE THE TPMS INSTRUCTION BASE OF MODEL AND YEAR MODEL

TPMS RESET BMW 1 Series 2008-2013 Tire Pressure Monitoring System Reset Guide
IF EQUIPPED WITH IDRIVE:
1. Ensure all tires are inflated to the pressure listed on the tire placard.
2. Turn ignition to the ON position (engine off).
3. Using the iDrive controller, select "Settings" or "Vehicle Info".
4. Select "Vehicle", "Vehicle/Tires" or "Vehicle Status".
5. Select "TPM", "Reset TPM", or "Perform Reset".
6. Start the engine, select "Reset", "Yes".
7. Vehicle must be driven for up to 20 minutes above 20mph to complete relearn.

IF NOT EQUIPPED WITH IDRIVE:
1. Ensure all tires are inflated to the pressure listed on the tire placard.
2. Start engine.
3. Move turn signal toggle switch up or down until TPMS indicator and "RESET" are displayed.
4. Press button at end of turn signal lever.
5. Press and hold button at end of turn signal lever until "RESETIING" or a checkmark is displayed.
6. Vehicle must be driven for up to 20 minutes above 20mph to complete relearn.

IF NOT EQUIPPED WITH IDRIVE (FOR SOME MODELS):
1. Ensure all tires are inflated to the pressure listed on the tire placard.
2. Start engine.
3. Hold down the TPMS Reset button (located under the hazards button or in front of the gear selector) until the TPMS light in the gauge cluster illuminates. Button may use initials ROE on some models.
4. Vehicle must be driven for up to 20 minutes above 20mph to complete relearn.

TPMS RESET BMW 2 Series 2014 Tire Pressure Monitoring System Reset Guide
IF EQUIPPED WITH IDRIVE:
1. Ensure all tires are inflated to the pressure listed on the tire placard.
2. Turn ignition to the ON position (engine off).
3. Using the iDrive controller, select "Settings" or "Vehicle Info".
4. Select "Vehicle", "Vehicle/Tires" or "Vehicle Status".
5. Select "TPM", "Reset TPM", or "Perform Reset".
6. Start the engine, select "Reset", "Yes".
7. Vehicle must be driven for up to 20 minutes above 20mph to complete relearn.

IF NOT EQUIPPED WITH IDRIVE:
1. Ensure all tires are inflated to the pressure listed on the tire placard.
2. Start engine.
3. Move turn signal toggle switch up or down until TPMS indicator and "RESET" are displayed.
4. Press button at end of turn signal lever.
5. Press and hold button at end of turn signal lever until "RESETIING" or a checkmark is displayed.
6. Vehicle must be driven for up to 20 minutes above 20mph to complete relearn.

IF NOT EQUIPPED WITH IDRIVE (FOR SOME MODELS):
1. Ensure all tires are inflated to the pressure listed on the tire placard.
2. Start engine.
3. Hold down the TPMS Reset button (located under the hazards button or in front of the gear selector) until the TPMS light in the gauge cluster illuminates. Button may use initials ROE on some models.
4. Vehicle must be driven for up to 20 minutes above 20mph to complete relearn.

TPMS RESET BMW 2 Series 2014-2015 Tire Pressure Monitoring System Reset Guide
IF EQUIPPED WITH IDRIVE:
1. Ensure all tires are inflated to the pressure listed on the tire placard.
2. Turn ignition to the ON position (engine off).
3. Using the iDrive controller, select "Settings" or "Vehicle Info".
4. Select "Vehicle", "Vehicle/Tires" or "Vehicle Status".
5. Select "TPM", "Reset TPM", or "Perform Reset".
6. Start the engine, select "Reset", "Yes".
7. Vehicle must be driven for up to 20 minutes above 20mph to complete relearn.

IF NOT EQUIPPED WITH IDRIVE:
1. Ensure all tires are inflated to the pressure listed on the tire placard.
2. Start engine.
3. Move turn signal toggle switch up or down until TPMS indicator and "RESET" are displayed.
4. Press button at end of turn signal lever.
5. Press and hold button at end of turn signal lever until "RESETIING" or a checkmark is displayed.
6. Vehicle must be driven for up to 20 minutes above 20mph to complete relearn.

IF NOT EQUIPPED WITH IDRIVE (FOR SOME MODELS):
1. Ensure all tires are inflated to the pressure listed on the tire placard.
2. Start engine.
3. Hold down the TPMS Reset button (located under the hazards button or in front of the gear selector) until the TPMS light in the gauge cluster illuminates. Button may use initials ROE on some models.
4. Vehicle must be driven for up to 20 minutes above 20mph to complete relearn.

TPMS RESET BMW 3 Series2007-2011 Tire Pressure Monitoring System Reset Guide
IF EQUIPPED WITH IDRIVE:
1. Ensure all tires are inflated to the pressure listed on the tire placard.
2. Turn ignition to the ON position (engine off).
3. Using the iDrive controller, select "Settings" or "Vehicle Info".
4. Select "Vehicle", "Vehicle/Tires" or "Vehicle Status".
5. Select "TPM", "Reset TPM", or "Perform Reset".
6. Start the engine, select "Reset", "Yes".
7. Vehicle must be driven for up to 20 minutes above 20mph to complete relearn.

IF NOT EQUIPPED WITH IDRIVE:
1. Ensure all tires are inflated to the pressure listed on the tire placard.
2. Start engine.
3. Move turn signal toggle switch up or down until TPMS indicator and "RESET" are displayed.
4. Press button at end of turn signal lever.
5. Press and hold button at end of turn signal lever until "RESETIING" or a checkmark is displayed.
6. Vehicle must be driven for up to 20 minutes above 20mph to complete relearn.

IF NOT EQUIPPED WITH IDRIVE (FOR SOME MODELS):
1. Ensure all tires are inflated to the pressure listed on the tire placard.
2. Start engine.
3. Hold down the TPMS Reset button (located under the hazards button or in front of the gear selector) until the TPMS light in the gauge cluster illuminates. Button may use initials ROE on some models.
4. Vehicle must be driven for up to 20 minutes above 20mph to complete relearn.

TPMS RESET BMW 3 Series 2 door/wagon 2012-2013 Tire Pressure Monitoring System Reset Guide
IF EQUIPPED WITH IDRIVE:
1. Ensure all tires are inflated to the pressure listed on the tire placard.
2. Turn ignition to the ON position (engine off).
3. Using the iDrive controller, select "Settings" or "Vehicle Info".
4. Select "Vehicle", "Vehicle/Tires" or "Vehicle Status".
5. Select "TPM", "Reset TPM", or "Perform Reset".
6. Start the engine, select "Reset", "Yes".
7. Vehicle must be driven for up to 20 minutes above 20mph to complete relearn.

IF NOT EQUIPPED WITH IDRIVE:
1. Ensure all tires are inflated to the pressure listed on the tire placard.
2. Start engine.
3. Move turn signal toggle switch up or down until TPMS indicator and "RESET" are displayed.
4. Press button at end of turn signal lever.
5. Press and hold button at end of turn signal lever until "RESETIING" or a checkmark is displayed.
6. Vehicle must be driven for up to 20 minutes above 20mph to complete relearn.

IF NOT EQUIPPED WITH IDRIVE (FOR SOME MODELS):
1. Ensure all tires are inflated to the pressure listed on the tire placard.
2. Start engine.
3. Hold down the TPMS Reset button (located under the hazards button or in front of the gear selector) until the TPMS light in the gauge cluster illuminates. Button may use initials ROE on some models.
4. Vehicle must be driven for up to 20 minutes above 20mph to complete relearn.

TPMS RESET BMW 3 Series 4 door sedan 2014 Tire Pressure Monitoring System Reset Guide
IF EQUIPPED WITH IDRIVE:
1. Ensure all tires are inflated to the pressure listed on the tire placard.
2. Turn ignition to the ON position (engine off).
3. Using the iDrive controller, select "Settings" or "Vehicle Info".
4. Select "Vehicle", "Vehicle/Tires" or "Vehicle Status".
5. Select "TPM", "Reset TPM", or "Perform Reset".
6. Start the engine, select "Reset", "Yes".
7. Vehicle must be driven for up to 20 minutes above 20mph to complete relearn.

IF NOT EQUIPPED WITH IDRIVE:
1. Ensure all tires are inflated to the pressure listed on the tire placard.
2. Start engine.
3. Move turn signal toggle switch up or down until TPMS indicator and "RESET" are displayed.
4. Press button at end of turn signal lever.
5. Press and hold button at end of turn signal lever until "RESETIING" or a checkmark is displayed.
6. Vehicle must be driven for up to 20 minutes above 20mph to complete relearn.

IF NOT EQUIPPED WITH IDRIVE (FOR SOME MODELS):
1. Ensure all tires are inflated to the pressure listed on the tire placard.
2. Start engine.
3. Hold down the TPMS Reset button (located under the hazards button or in front of the gear selector) until the TPMS light in the gauge cluster illuminates. Button may use initials ROE on some models.
4. Vehicle must be driven for up to 20 minutes above 20mph to complete relearn.

TPMS RESET BMW 3 Series 2014-2015 Tire Pressure Monitoring System Reset Guide
IF EQUIPPED WITH IDRIVE:
1. Ensure all tires are inflated to the pressure listed on the tire placard.
2. Turn ignition to the ON position (engine off).
3. Using the iDrive controller, select "Settings" or "Vehicle Info".
4. Select "Vehicle", "Vehicle/Tires" or "Vehicle Status".
5. Select "TPM", "Reset TPM", or "Perform Reset".
6. Start the engine, select "Reset", "Yes".
7. Vehicle must be driven for up to 20 minutes above 20mph to complete relearn.

IF NOT EQUIPPED WITH IDRIVE:
1. Ensure all tires are inflated to the pressure listed on the tire placard.
2. Start engine.
3. Move turn signal toggle switch up or down until TPMS indicator and "RESET" are displayed.
4. Press button at end of turn signal lever.
5. Press and hold button at end of turn signal lever until "RESETIING" or a checkmark is displayed.
6. Vehicle must be driven for up to 20 minutes above 20mph to complete relearn.

IF NOT EQUIPPED WITH IDRIVE (FOR SOME MODELS):
1. Ensure all tires are inflated to the pressure listed on the tire placard.
2. Start engine.
3. Hold down the TPMS Reset button (located under the hazards button or in front of the gear selector) until the TPMS light in the gauge cluster illuminates. Button may use initials ROE on some models.
4. Vehicle must be driven for up to 20 minutes above 20mph to complete relearn.

TPMS RESET BMW 4 Series 2014 Tire Pressure Monitoring System Reset Guide
IF EQUIPPED WITH IDRIVE:
1. Ensure all tires are inflated to the pressure listed on the tire placard.
2. Turn ignition to the ON position (engine off).
3. Using the iDrive controller, select "Settings" or "Vehicle Info".
4. Select "Vehicle", "Vehicle/Tires" or "Vehicle Status".
5. Select "TPM", "Reset TPM", or "Perform Reset".
6. Start the engine, select "Reset", "Yes".
7. Vehicle must be driven for up to 20 minutes above 20mph to complete relearn.

IF NOT EQUIPPED WITH IDRIVE:
1. Ensure all tires are inflated to the pressure listed on the tire placard.
2. Start engine.
3. Move turn signal toggle switch up or down until TPMS indicator and "RESET" are displayed.
4. Press button at end of turn signal lever.
5. Press and hold button at end of turn signal lever until "RESETIING" or a checkmark is displayed.
6. Vehicle must be driven for up to 20 minutes above 20mph to complete relearn.

IF NOT EQUIPPED WITH IDRIVE (FOR SOME MODELS):
1. Ensure all tires are inflated to the pressure listed on the tire placard.
2. Start engine.
3. Hold down the TPMS Reset button (located under the hazards button or in front of the gear selector) until the TPMS light in the gauge cluster illuminates. Button may use initials ROE on some models.
4. Vehicle must be driven for up to 20 minutes above 20mph to complete relearn.

TPMS RESET BMW 4 Series 2014-2015 Tire Pressure Monitoring System Reset Guide
IF EQUIPPED WITH IDRIVE:
1. Ensure all tires are inflated to the pressure listed on the tire placard.
2. Turn ignition to the ON position (engine off).
3. Using the iDrive controller, select "Settings" or "Vehicle Info".
4. Select "Vehicle", "Vehicle/Tires" or "Vehicle Status".
5. Select "TPM", "Reset TPM", or "Perform Reset".
6. Start the engine, select "Reset", "Yes".
7. Vehicle must be driven for up to 20 minutes above 20mph to complete relearn.

IF NOT EQUIPPED WITH IDRIVE:
1. Ensure all tires are inflated to the pressure listed on the tire placard.
2. Start engine.
3. Move turn signal toggle switch up or down until TPMS indicator and "RESET" are displayed.
4. Press button at end of turn signal lever.
5. Press and hold button at end of turn signal lever until "RESETIING" or a checkmark is displayed.
6. Vehicle must be driven for up to 20 minutes above 20mph to complete relearn.

IF NOT EQUIPPED WITH IDRIVE (FOR SOME MODELS):
1. Ensure all tires are inflated to the pressure listed on the tire placard.
2. Start engine.
3. Hold down the TPMS Reset button (located under the hazards button or in front of the gear selector) until the TPMS light in the gauge cluster illuminates. Button may use initials ROE on some models.
4. Vehicle must be driven for up to 20 minutes above 20mph to complete relearn.

TPMS RESET BMW 5 Series 2006-2011 Tire Pressure Monitoring System Reset Guide
IF EQUIPPED WITH IDRIVE:
1. Ensure all tires are inflated to the pressure listed on the tire placard.
2. Turn ignition to the ON position (engine off).
3. Using the iDrive controller, select "Settings" or "Vehicle Info".
4. Select "Vehicle", "Vehicle/Tires" or "Vehicle Status".
5. Select "TPM", "Reset TPM", or "Perform Reset".
6. Start the engine, select "Reset", "Yes".
7. Vehicle must be driven for up to 20 minutes above 20mph to complete relearn.

IF NOT EQUIPPED WITH IDRIVE:
1. Ensure all tires are inflated to the pressure listed on the tire placard.
2. Start engine.
3. Move turn signal toggle switch up or down until TPMS indicator and "RESET" are displayed.
4. Press button at end of turn signal lever.
5. Press and hold button at end of turn signal lever until "RESETIING" or a checkmark is displayed.
6. Vehicle must be driven for up to 20 minutes above 20mph to complete relearn.

IF NOT EQUIPPED WITH IDRIVE (FOR SOME MODELS):
1. Ensure all tires are inflated to the pressure listed on the tire placard.
2. Start engine.
3. Hold down the TPMS Reset button (located under the hazards button or in front of the gear selector) until the TPMS light in the gauge cluster illuminates. Button may use initials ROE on some models.
4. Vehicle must be driven for up to 20 minutes above 20mph to complete relearn.

TPMS RESET BMW 5 Series 2011-2014 Tire Pressure Monitoring System Reset Guide
IF EQUIPPED WITH IDRIVE:
1. Ensure all tires are inflated to the pressure listed on the tire placard.
2. Turn ignition to the ON position (engine off).
3. Using the iDrive controller, select "Settings" or "Vehicle Info".
4. Select "Vehicle", "Vehicle/Tires" or "Vehicle Status".
5. Select "TPM", "Reset TPM", or "Perform Reset".
6. Start the engine, select "Reset", "Yes".
7. Vehicle must be driven for up to 20 minutes above 20mph to complete relearn.

IF NOT EQUIPPED WITH IDRIVE:
1. Ensure all tires are inflated to the pressure listed on the tire placard.
2. Start engine.
3. Move turn signal toggle switch up or down until TPMS indicator and "RESET" are displayed.
4. Press button at end of turn signal lever.
5. Press and hold button at end of turn signal lever until "RESETIING" or a checkmark is displayed.
6. Vehicle must be driven for up to 20 minutes above 20mph to complete relearn.

IF NOT EQUIPPED WITH IDRIVE (FOR SOME MODELS):
1. Ensure all tires are inflated to the pressure listed on the tire placard.
2. Start engine.
3. Hold down the TPMS Reset button (located under the hazards button or in front of the gear selector) until the TPMS light in the gauge cluster illuminates. Button may use initials ROE on some models.
4. Vehicle must be driven for up to 20 minutes above 20mph to complete relearn.

TPMS RESET BMW 5 Series 2015 Tire Pressure Monitoring System Reset Guide
IF EQUIPPED WITH IDRIVE:
1. Ensure all tires are inflated to the pressure listed on the tire placard.
2. Turn ignition to the ON position (engine off).
3. Using the iDrive controller, select "Settings" or "Vehicle Info".
4. Select "Vehicle", "Vehicle/Tires" or "Vehicle Status".
5. Select "TPM", "Reset TPM", or "Perform Reset".
6. Start the engine, select "Reset", "Yes".
7. Vehicle must be driven for up to 20 minutes above 20mph to complete relearn.

IF NOT EQUIPPED WITH IDRIVE:
1. Ensure all tires are inflated to the pressure listed on the tire placard.
2. Start engine.
3. Move turn signal toggle switch up or down until TPMS indicator and "RESET" are displayed.
4. Press button at end of turn signal lever.
5. Press and hold button at end of turn signal lever until "RESETIING" or a checkmark is displayed.
6. Vehicle must be driven for up to 20 minutes above 20mph to complete relearn.

IF NOT EQUIPPED WITH IDRIVE (FOR SOME MODELS):
1. Ensure all tires are inflated to the pressure listed on the tire placard.
2. Start engine.
3. Hold down the TPMS Reset button (located under the hazards button or in front of the gear selector) until the TPMS light in the gauge cluster illuminates. Button may use initials ROE on some models.
4. Vehicle must be driven for up to 20 minutes above 20mph to complete relearn.

TPMS RESET BMW 6 Series 2006-2015 Tire Pressure Monitoring System Reset Guide
IF EQUIPPED WITH IDRIVE:
1. Ensure all tires are inflated to the pressure listed on the tire placard.
2. Turn ignition to the ON position (engine off).
3. Using the iDrive controller, select "Settings" or "Vehicle Info".
4. Select "Vehicle", "Vehicle/Tires" or "Vehicle Status".
5. Select "TPM", "Reset TPM", or "Perform Reset".
6. Start the engine, select "Reset", "Yes".
7. Vehicle must be driven for up to 20 minutes above 20mph to complete relearn.

IF NOT EQUIPPED WITH IDRIVE:
1. Ensure all tires are inflated to the pressure listed on the tire placard.
2. Start engine.
3. Move turn signal toggle switch up or down until TPMS indicator and "RESET" are displayed.
4. Press button at end of turn signal lever.
5. Press and hold button at end of turn signal lever until "RESETIING" or a checkmark is displayed.
6. Vehicle must be driven for up to 20 minutes above 20mph to complete relearn.

IF NOT EQUIPPED WITH IDRIVE (FOR SOME MODELS):
1. Ensure all tires are inflated to the pressure listed on the tire placard.
2. Start engine.
3. Hold down the TPMS Reset button (located under the hazards button or in front of the gear selector) until the TPMS light in the gauge cluster illuminates. Button may use initials ROE on some models.
4. Vehicle must be driven for up to 20 minutes above 20mph to complete relearn.

TPMS RESET BMW 7 Series 2006-2011 Tire Pressure Monitoring System Reset Guide
IF EQUIPPED WITH IDRIVE:
1. Ensure all tires are inflated to the pressure listed on the tire placard.
2. Turn ignition to the ON position (engine off).
3. Using the iDrive controller, select "Settings" or "Vehicle Info".
4. Select "Vehicle", "Vehicle/Tires" or "Vehicle Status".
5. Select "TPM", "Reset TPM", or "Perform Reset".
6. Start the engine, select "Reset", "Yes".
7. Vehicle must be driven for up to 20 minutes above 20mph to complete relearn.

IF NOT EQUIPPED WITH IDRIVE:
1. Ensure all tires are inflated to the pressure listed on the tire placard.
2. Start engine.
3. Move turn signal toggle switch up or down until TPMS indicator and "RESET" are displayed.
4. Press button at end of turn signal lever.
5. Press and hold button at end of turn signal lever until "RESETIING" or a checkmark is displayed.
6. Vehicle must be driven for up to 20 minutes above 20mph to complete relearn.

IF NOT EQUIPPED WITH IDRIVE (FOR SOME MODELS):
1. Ensure all tires are inflated to the pressure listed on the tire placard.
2. Start engine.
3. Hold down the TPMS Reset button (located under the hazards button or in front of the gear selector) until the TPMS light in the gauge cluster illuminates. Button may use initials ROE on some models.
4. Vehicle must be driven for up to 20 minutes above 20mph to complete relearn.

TPMS RESET BMW 7 Series 2011-2014 Tire Pressure Monitoring System Reset Guide
IF EQUIPPED WITH IDRIVE:
1. Ensure all tires are inflated to the pressure listed on the tire placard.
2. Turn ignition to the ON position (engine off).
3. Using the iDrive controller, select "Settings" or "Vehicle Info".
4. Select "Vehicle", "Vehicle/Tires" or "Vehicle Status".
5. Select "TPM", "Reset TPM", or "Perform Reset".
6. Start the engine, select "Reset", "Yes".
7. Vehicle must be driven for up to 20 minutes above 20mph to complete relearn.

IF NOT EQUIPPED WITH IDRIVE:
1. Ensure all tires are inflated to the pressure listed on the tire placard.
2. Start engine.
3. Move turn signal toggle switch up or down until TPMS indicator and "RESET" are displayed.
4. Press button at end of turn signal lever.
5. Press and hold button at end of turn signal lever until "RESETIING" or a checkmark is displayed.
6. Vehicle must be driven for up to 20 minutes above 20mph to complete relearn.

IF NOT EQUIPPED WITH IDRIVE (FOR SOME MODELS):
1. Ensure all tires are inflated to the pressure listed on the tire placard.
2. Start engine.
3. Hold down the TPMS Reset button (located under the hazards button or in front of the gear selector) until the TPMS light in the gauge cluster illuminates. Button may use initials ROE on some models.
4. Vehicle must be driven for up to 20 minutes above 20mph to complete relearn.

TPMS RESET BMW 7 Series 2015 Tire Pressure Monitoring System Reset Guide
IF EQUIPPED WITH IDRIVE:
1. Ensure all tires are inflated to the pressure listed on the tire placard.
2. Turn ignition to the ON position (engine off).
3. Using the iDrive controller, select "Settings" or "Vehicle Info".
4. Select "Vehicle", "Vehicle/Tires" or "Vehicle Status".
5. Select "TPM", "Reset TPM", or "Perform Reset".
6. Start the engine, select "Reset", "Yes".
7. Vehicle must be driven for up to 20 minutes above 20mph to complete relearn.

IF NOT EQUIPPED WITH IDRIVE:
1. Ensure all tires are inflated to the pressure listed on the tire placard.
2. Start engine.
3. Move turn signal toggle switch up or down until TPMS indicator and "RESET" are displayed.
4. Press button at end of turn signal lever.
5. Press and hold button at end of turn signal lever until "RESETIING" or a checkmark is displayed.
6. Vehicle must be driven for up to 20 minutes above 20mph to complete relearn.

IF NOT EQUIPPED WITH IDRIVE (FOR SOME MODELS):
1. Ensure all tires are inflated to the pressure listed on the tire placard.
2. Start engine.
3. Hold down the TPMS Reset button (located under the hazards button or in front of the gear selector) until the TPMS light in the gauge cluster illuminates. Button may use initials ROE on some models.
4. Vehicle must be driven for up to 20 minutes above 20mph to complete relearn.

TPMS RESET BMW Alpina 2004-2014 Tire Pressure Monitoring System Reset Guide
IF EQUIPPED WITH IDRIVE:
1. Ensure all tires are inflated to the pressure listed on the tire placard.
2. Turn ignition to the ON position (engine off).
3. Using the iDrive controller, select "Settings" or "Vehicle Info".
4. Select "Vehicle", "Vehicle/Tires" or "Vehicle Status".
5. Select "TPM", "Reset TPM", or "Perform Reset".
6. Start the engine, select "Reset", "Yes".
7. Vehicle must be driven for up to 20 minutes above 20mph to complete relearn.

IF NOT EQUIPPED WITH IDRIVE:
1. Ensure all tires are inflated to the pressure listed on the tire placard.
2. Start engine.
3. Move turn signal toggle switch up or down until TPMS indicator and "RESET" are displayed.
4. Press button at end of turn signal lever.
5. Press and hold button at end of turn signal lever until "RESETIING" or a checkmark is displayed.
6. Vehicle must be driven for up to 20 minutes above 20mph to complete relearn.

IF NOT EQUIPPED WITH IDRIVE (FOR SOME MODELS):
1. Ensure all tires are inflated to the pressure listed on the tire placard.
2. Start engine.
3. Hold down the TPMS Reset button (located under the hazards button or in front of the gear selector) until the TPMS light in the gauge cluster illuminates. Button may use initials ROE on some models.
4. Vehicle must be driven for up to 20 minutes above 20mph to complete relearn.

TPMS RESET BMW I3 2014-2015 Tire Pressure Monitoring System Reset Guide
IF EQUIPPED WITH IDRIVE:
1. Ensure all tires are inflated to the pressure listed on the tire placard.
2. Turn ignition to the ON position (engine off).
3. Using the iDrive controller, select "Settings" or "Vehicle Info".
4. Select "Vehicle", "Vehicle/Tires" or "Vehicle Status".
5. Select "TPM", "Reset TPM", or "Perform Reset".
6. Start the engine, select "Reset", "Yes".
7. Vehicle must be driven for up to 20 minutes above 20mph to complete relearn.

IF NOT EQUIPPED WITH IDRIVE:
1. Ensure all tires are inflated to the pressure listed on the tire placard.
2. Start engine.
3. Move turn signal toggle switch up or down until TPMS indicator and "RESET" are displayed.
4. Press button at end of turn signal lever.
5. Press and hold button at end of turn signal lever until "RESETIING" or a checkmark is displayed.
6. Vehicle must be driven for up to 20 minutes above 20mph to complete relearn.

IF NOT EQUIPPED WITH IDRIVE (FOR SOME MODELS):
1. Ensure all tires are inflated to the pressure listed on the tire placard.
2. Start engine.
3. Hold down the TPMS Reset button (located under the hazards button or in front of the gear selector) until the TPMS light in the gauge cluster illuminates. Button may use initials ROE on some models.
4. Vehicle must be driven for up to 20 minutes above 20mph to complete relearn.

TPMS RESET BMW I8 2014-2015 Tire Pressure Monitoring System Reset Guide
IF EQUIPPED WITH IDRIVE:
1. Ensure all tires are inflated to the pressure listed on the tire placard.
2. Turn ignition to the ON position (engine off).
3. Using the iDrive controller, select "Settings" or "Vehicle Info".
4. Select "Vehicle", "Vehicle/Tires" or "Vehicle Status".
5. Select "TPM", "Reset TPM", or "Perform Reset".
6. Start the engine, select "Reset", "Yes".
7. Vehicle must be driven for up to 20 minutes above 20mph to complete relearn.

IF NOT EQUIPPED WITH IDRIVE:
1. Ensure all tires are inflated to the pressure listed on the tire placard.
2. Start engine.
3. Move turn signal toggle switch up or down until TPMS indicator and "RESET" are displayed.
4. Press button at end of turn signal lever.
5. Press and hold button at end of turn signal lever until "RESETIING" or a checkmark is displayed.
6. Vehicle must be driven for up to 20 minutes above 20mph to complete relearn.

IF NOT EQUIPPED WITH IDRIVE (FOR SOME MODELS):
1. Ensure all tires are inflated to the pressure listed on the tire placard.
2. Start engine.
3. Hold down the TPMS Reset button (located under the hazards button or in front of the gear selector) until the TPMS light in the gauge cluster illuminates. Button may use initials ROE on some models.
4. Vehicle must be driven for up to 20 minutes above 20mph to complete relearn.

TPMS RESET BMW M3 2008-2013 Tire Pressure Monitoring System Reset Guide
IF EQUIPPED WITH IDRIVE:
1. Ensure all tires are inflated to the pressure listed on the tire placard.
2. Turn ignition to the ON position (engine off).
3. Using the iDrive controller, select "Settings" or "Vehicle Info".
4. Select "Vehicle", "Vehicle/Tires" or "Vehicle Status".
5. Select "TPM", "Reset TPM", or "Perform Reset".
6. Start the engine, select "Reset", "Yes".
7. Vehicle must be driven for up to 20 minutes above 20mph to complete relearn.

IF NOT EQUIPPED WITH IDRIVE:
1. Ensure all tires are inflated to the pressure listed on the tire placard.
2. Start engine.
3. Move turn signal toggle switch up or down until TPMS indicator and "RESET" are displayed.
4. Press button at end of turn signal lever.
5. Press and hold button at end of turn signal lever until "RESETIING" or a checkmark is displayed.
6. Vehicle must be driven for up to 20 minutes above 20mph to complete relearn.

IF NOT EQUIPPED WITH IDRIVE (FOR SOME MODELS):
1. Ensure all tires are inflated to the pressure listed on the tire placard.
2. Start engine.
3. Hold down the TPMS Reset button (located under the hazards button or in front of the gear selector) until the TPMS light in the gauge cluster illuminates. Button may use initials ROE on some models.
4. Vehicle must be driven for up to 20 minutes above 20mph to complete relearn.

TPMS RESET BMW M5 2006-2011 Tire Pressure Monitoring System Reset Guide
IF EQUIPPED WITH IDRIVE:
1. Ensure all tires are inflated to the pressure listed on the tire placard.
2. Turn ignition to the ON position (engine off).
3. Using the iDrive controller, select "Settings" or "Vehicle Info".
4. Select "Vehicle", "Vehicle/Tires" or "Vehicle Status".
5. Select "TPM", "Reset TPM", or "Perform Reset".
6. Start the engine, select "Reset", "Yes".
7. Vehicle must be driven for up to 20 minutes above 20mph to complete relearn.

IF NOT EQUIPPED WITH IDRIVE:
1. Ensure all tires are inflated to the pressure listed on the tire placard.
2. Start engine.
3. Move turn signal toggle switch up or down until TPMS indicator and "RESET" are displayed.
4. Press button at end of turn signal lever.
5. Press and hold button at end of turn signal lever until "RESETIING" or a checkmark is displayed.
6. Vehicle must be driven for up to 20 minutes above 20mph to complete relearn.

IF NOT EQUIPPED WITH IDRIVE (FOR SOME MODELS):
1. Ensure all tires are inflated to the pressure listed on the tire placard.
2. Start engine.
3. Hold down the TPMS Reset button (located under the hazards button or in front of the gear selector) until the TPMS light in the gauge cluster illuminates. Button may use initials ROE on some models.
4. Vehicle must be driven for up to 20 minutes above 20mph to complete relearn.

TPMS RESET BMW M6 2006-2011 Tire Pressure Monitoring System Reset Guide
IF EQUIPPED WITH IDRIVE:
1. Ensure all tires are inflated to the pressure listed on the tire placard.
2. Turn ignition to the ON position (engine off).
3. Using the iDrive controller, select "Settings" or "Vehicle Info".
4. Select "Vehicle", "Vehicle/Tires" or "Vehicle Status".
5. Select "TPM", "Reset TPM", or "Perform Reset".
6. Start the engine, select "Reset", "Yes".
7. Vehicle must be driven for up to 20 minutes above 20mph to complete relearn.

IF NOT EQUIPPED WITH IDRIVE:
1. Ensure all tires are inflated to the pressure listed on the tire placard.
2. Start engine.
3. Move turn signal toggle switch up or down until TPMS indicator and "RESET" are displayed.
4. Press button at end of turn signal lever.
5. Press and hold button at end of turn signal lever until "RESETIING" or a checkmark is displayed.
6. Vehicle must be driven for up to 20 minutes above 20mph to complete relearn.

IF NOT EQUIPPED WITH IDRIVE (FOR SOME MODELS):
1. Ensure all tires are inflated to the pressure listed on the tire placard.
2. Start engine.
3. Hold down the TPMS Reset button (located under the hazards button or in front of the gear selector) until the TPMS light in the gauge cluster illuminates. Button may use initials ROE on some models.
4. Vehicle must be driven for up to 20 minutes above 20mph to complete relearn.


TPMS RESET BMW M6 2011-2014 Tire Pressure Monitoring System Reset Guide
IF EQUIPPED WITH IDRIVE:
1. Ensure all tires are inflated to the pressure listed on the tire placard.
2. Turn ignition to the ON position (engine off).
3. Using the iDrive controller, select "Settings" or "Vehicle Info".
4. Select "Vehicle", "Vehicle/Tires" or "Vehicle Status".
5. Select "TPM", "Reset TPM", or "Perform Reset".
6. Start the engine, select "Reset", "Yes".
7. Vehicle must be driven for up to 20 minutes above 20mph to complete relearn.

IF NOT EQUIPPED WITH IDRIVE:
1. Ensure all tires are inflated to the pressure listed on the tire placard.
2. Start engine.
3. Move turn signal toggle switch up or down until TPMS indicator and "RESET" are displayed.
4. Press button at end of turn signal lever.
5. Press and hold button at end of turn signal lever until "RESETIING" or a checkmark is displayed.
6. Vehicle must be driven for up to 20 minutes above 20mph to complete relearn.

IF NOT EQUIPPED WITH IDRIVE (FOR SOME MODELS):
1. Ensure all tires are inflated to the pressure listed on the tire placard.
2. Start engine.
3. Hold down the TPMS Reset button (located under the hazards button or in front of the gear selector) until the TPMS light in the gauge cluster illuminates. Button may use initials ROE on some models.
4. Vehicle must be driven for up to 20 minutes above 20mph to complete relearn.

TPMS RESET BMW X1 2013-2015 Tire Pressure Monitoring System Reset Guide
IF EQUIPPED WITH IDRIVE:
1. Ensure all tires are inflated to the pressure listed on the tire placard.
2. Turn ignition to the ON position (engine off).
3. Using the iDrive controller, select "Settings" or "Vehicle Info".
4. Select "Vehicle", "Vehicle/Tires" or "Vehicle Status".
5. Select "TPM", "Reset TPM", or "Perform Reset".
6. Start the engine, select "Reset", "Yes".
7. Vehicle must be driven for up to 20 minutes above 20mph to complete relearn.

IF NOT EQUIPPED WITH IDRIVE:
1. Ensure all tires are inflated to the pressure listed on the tire placard.
2. Start engine.
3. Move turn signal toggle switch up or down until TPMS indicator and "RESET" are displayed.
4. Press button at end of turn signal lever.
5. Press and hold button at end of turn signal lever until "RESETIING" or a checkmark is displayed.
6. Vehicle must be driven for up to 20 minutes above 20mph to complete relearn.

IF NOT EQUIPPED WITH IDRIVE (FOR SOME MODELS):
1. Ensure all tires are inflated to the pressure listed on the tire placard.
2. Start engine.
3. Hold down the TPMS Reset button (located under the hazards button or in front of the gear selector) until the TPMS light in the gauge cluster illuminates. Button may use initials ROE on some models.
4. Vehicle must be driven for up to 20 minutes above 20mph to complete relearn.

TPMS RESET BMW X3 2006-2014 Tire Pressure Monitoring System Reset Guide
IF EQUIPPED WITH IDRIVE:
1. Ensure all tires are inflated to the pressure listed on the tire placard.
2. Turn ignition to the ON position (engine off).
3. Using the iDrive controller, select "Settings" or "Vehicle Info".
4. Select "Vehicle", "Vehicle/Tires" or "Vehicle Status".
5. Select "TPM", "Reset TPM", or "Perform Reset".
6. Start the engine, select "Reset", "Yes".
7. Vehicle must be driven for up to 20 minutes above 20mph to complete relearn.

IF NOT EQUIPPED WITH IDRIVE:
1. Ensure all tires are inflated to the pressure listed on the tire placard.
2. Start engine.
3. Move turn signal toggle switch up or down until TPMS indicator and "RESET" are displayed.
4. Press button at end of turn signal lever.
5. Press and hold button at end of turn signal lever until "RESETIING" or a checkmark is displayed.
6. Vehicle must be driven for up to 20 minutes above 20mph to complete relearn.

IF NOT EQUIPPED WITH IDRIVE (FOR SOME MODELS):
1. Ensure all tires are inflated to the pressure listed on the tire placard.
2. Start engine.
3. Hold down the TPMS Reset button (located under the hazards button or in front of the gear selector) until the TPMS light in the gauge cluster illuminates. Button may use initials ROE on some models.
4. Vehicle must be driven for up to 20 minutes above 20mph to complete relearn.

TPMS RESET BMW X3 2015 Tire Pressure Monitoring System Reset Guide
IF EQUIPPED WITH IDRIVE:
1. Ensure all tires are inflated to the pressure listed on the tire placard.
2. Turn ignition to the ON position (engine off).
3. Using the iDrive controller, select "Settings" or "Vehicle Info".
4. Select "Vehicle", "Vehicle/Tires" or "Vehicle Status".
5. Select "TPM", "Reset TPM", or "Perform Reset".
6. Start the engine, select "Reset", "Yes".
7. Vehicle must be driven for up to 20 minutes above 20mph to complete relearn.

IF NOT EQUIPPED WITH IDRIVE:
1. Ensure all tires are inflated to the pressure listed on the tire placard.
2. Start engine.
3. Move turn signal toggle switch up or down until TPMS indicator and "RESET" are displayed.
4. Press button at end of turn signal lever.
5. Press and hold button at end of turn signal lever until "RESETIING" or a checkmark is displayed.
6. Vehicle must be driven for up to 20 minutes above 20mph to complete relearn.

IF NOT EQUIPPED WITH IDRIVE (FOR SOME MODELS):
1. Ensure all tires are inflated to the pressure listed on the tire placard.
2. Start engine.
3. Hold down the TPMS Reset button (located under the hazards button or in front of the gear selector) until the TPMS light in the gauge cluster illuminates. Button may use initials ROE on some models.
4. Vehicle must be driven for up to 20 minutes above 20mph to complete relearn.

TPMS RESET BMW X4 2015 Tire Pressure Monitoring System Reset Guide
IF EQUIPPED WITH IDRIVE:
1. Ensure all tires are inflated to the pressure listed on the tire placard.
2. Turn ignition to the ON position (engine off).
3. Using the iDrive controller, select "Settings" or "Vehicle Info".
4. Select "Vehicle", "Vehicle/Tires" or "Vehicle Status".
5. Select "TPM", "Reset TPM", or "Perform Reset".
6. Start the engine, select "Reset", "Yes".
7. Vehicle must be driven for up to 20 minutes above 20mph to complete relearn.

IF NOT EQUIPPED WITH IDRIVE:
1. Ensure all tires are inflated to the pressure listed on the tire placard.
2. Start engine.
3. Move turn signal toggle switch up or down until TPMS indicator and "RESET" are displayed.
4. Press button at end of turn signal lever.
5. Press and hold button at end of turn signal lever until "RESETIING" or a checkmark is displayed.
6. Vehicle must be driven for up to 20 minutes above 20mph to complete relearn.

IF NOT EQUIPPED WITH IDRIVE (FOR SOME MODELS):
1. Ensure all tires are inflated to the pressure listed on the tire placard.
2. Start engine.
3. Hold down the TPMS Reset button (located under the hazards button or in front of the gear selector) until the TPMS light in the gauge cluster illuminates. Button may use initials ROE on some models.
4. Vehicle must be driven for up to 20 minutes above 20mph to complete relearn.

TPMS RESET BMW X5 2007-2011 Tire Pressure Monitoring System Reset Guide
IF EQUIPPED WITH IDRIVE:
1. Ensure all tires are inflated to the pressure listed on the tire placard.
2. Turn ignition to the ON position (engine off).
3. Using the iDrive controller, select "Settings" or "Vehicle Info".
4. Select "Vehicle", "Vehicle/Tires" or "Vehicle Status".
5. Select "TPM", "Reset TPM", or "Perform Reset".
6. Start the engine, select "Reset", "Yes".
7. Vehicle must be driven for up to 20 minutes above 20mph to complete relearn.

IF NOT EQUIPPED WITH IDRIVE:
1. Ensure all tires are inflated to the pressure listed on the tire placard.
2. Start engine.
3. Move turn signal toggle switch up or down until TPMS indicator and "RESET" are displayed.
4. Press button at end of turn signal lever.
5. Press and hold button at end of turn signal lever until "RESETIING" or a checkmark is displayed.
6. Vehicle must be driven for up to 20 minutes above 20mph to complete relearn.

IF NOT EQUIPPED WITH IDRIVE (FOR SOME MODELS):
1. Ensure all tires are inflated to the pressure listed on the tire placard.
2. Start engine.
3. Hold down the TPMS Reset button (located under the hazards button or in front of the gear selector) until the TPMS light in the gauge cluster illuminates. Button may use initials ROE on some models.
4. Vehicle must be driven for up to 20 minutes above 20mph to complete relearn.

TPMS RESET BMW X5 2011-2013 Tire Pressure Monitoring System Reset Guide
IF EQUIPPED WITH IDRIVE:
1. Ensure all tires are inflated to the pressure listed on the tire placard.
2. Turn ignition to the ON position (engine off).
3. Using the iDrive controller, select "Settings" or "Vehicle Info".
4. Select "Vehicle", "Vehicle/Tires" or "Vehicle Status".
5. Select "TPM", "Reset TPM", or "Perform Reset".
6. Start the engine, select "Reset", "Yes".
7. Vehicle must be driven for up to 20 minutes above 20mph to complete relearn.

IF NOT EQUIPPED WITH IDRIVE:
1. Ensure all tires are inflated to the pressure listed on the tire placard.
2. Start engine.
3. Move turn signal toggle switch up or down until TPMS indicator and "RESET" are displayed.
4. Press button at end of turn signal lever.
5. Press and hold button at end of turn signal lever until "RESETIING" or a checkmark is displayed.
6. Vehicle must be driven for up to 20 minutes above 20mph to complete relearn.

IF NOT EQUIPPED WITH IDRIVE (FOR SOME MODELS):
1. Ensure all tires are inflated to the pressure listed on the tire placard.
2. Start engine.
3. Hold down the TPMS Reset button (located under the hazards button or in front of the gear selector) until the TPMS light in the gauge cluster illuminates. Button may use initials ROE on some models.
4. Vehicle must be driven for up to 20 minutes above 20mph to complete relearn.

TPMS RESET BMW X5 2014-2015 Tire Pressure Monitoring System Reset Guide
IF EQUIPPED WITH IDRIVE:
1. Ensure all tires are inflated to the pressure listed on the tire placard.
2. Turn ignition to the ON position (engine off).
3. Using the iDrive controller, select "Settings" or "Vehicle Info".
4. Select "Vehicle", "Vehicle/Tires" or "Vehicle Status".
5. Select "TPM", "Reset TPM", or "Perform Reset".
6. Start the engine, select "Reset", "Yes".
7. Vehicle must be driven for up to 20 minutes above 20mph to complete relearn.

IF NOT EQUIPPED WITH IDRIVE:
1. Ensure all tires are inflated to the pressure listed on the tire placard.
2. Start engine.
3. Move turn signal toggle switch up or down until TPMS indicator and "RESET" are displayed.
4. Press button at end of turn signal lever.
5. Press and hold button at end of turn signal lever until "RESETIING" or a checkmark is displayed.
6. Vehicle must be driven for up to 20 minutes above 20mph to complete relearn.

IF NOT EQUIPPED WITH IDRIVE (FOR SOME MODELS):
1. Ensure all tires are inflated to the pressure listed on the tire placard.
2. Start engine.
3. Hold down the TPMS Reset button (located under the hazards button or in front of the gear selector) until the TPMS light in the gauge cluster illuminates. Button may use initials ROE on some models.
4. Vehicle must be driven for up to 20 minutes above 20mph to complete relearn.

TPMS RESET BMW X6 2008-2011 Tire Pressure Monitoring System Reset Guide
IF EQUIPPED WITH IDRIVE:
1. Ensure all tires are inflated to the pressure listed on the tire placard.
2. Turn ignition to the ON position (engine off).
3. Using the iDrive controller, select "Settings" or "Vehicle Info".
4. Select "Vehicle", "Vehicle/Tires" or "Vehicle Status".
5. Select "TPM", "Reset TPM", or "Perform Reset".
6. Start the engine, select "Reset", "Yes".
7. Vehicle must be driven for up to 20 minutes above 20mph to complete relearn.

IF NOT EQUIPPED WITH IDRIVE:
1. Ensure all tires are inflated to the pressure listed on the tire placard.
2. Start engine.
3. Move turn signal toggle switch up or down until TPMS indicator and "RESET" are displayed.
4. Press button at end of turn signal lever.
5. Press and hold button at end of turn signal lever until "RESETIING" or a checkmark is displayed.
6. Vehicle must be driven for up to 20 minutes above 20mph to complete relearn.

IF NOT EQUIPPED WITH IDRIVE (FOR SOME MODELS):
1. Ensure all tires are inflated to the pressure listed on the tire placard.
2. Start engine.
3. Hold down the TPMS Reset button (located under the hazards button or in front of the gear selector) until the TPMS light in the gauge cluster illuminates. Button may use initials ROE on some models.
4. Vehicle must be driven for up to 20 minutes above 20mph to complete relearn.

TPMS RESET BMW X6 2011-2014 Tire Pressure Monitoring System Reset Guide
IF EQUIPPED WITH IDRIVE:
1. Ensure all tires are inflated to the pressure listed on the tire placard.
2. Turn ignition to the ON position (engine off).
3. Using the iDrive controller, select "Settings" or "Vehicle Info".
4. Select "Vehicle", "Vehicle/Tires" or "Vehicle Status".
5. Select "TPM", "Reset TPM", or "Perform Reset".
6. Start the engine, select "Reset", "Yes".
7. Vehicle must be driven for up to 20 minutes above 20mph to complete relearn.

IF NOT EQUIPPED WITH IDRIVE:
1. Ensure all tires are inflated to the pressure listed on the tire placard.
2. Start engine.
3. Move turn signal toggle switch up or down until TPMS indicator and "RESET" are displayed.
4. Press button at end of turn signal lever.
5. Press and hold button at end of turn signal lever until "RESETIING" or a checkmark is displayed.
6. Vehicle must be driven for up to 20 minutes above 20mph to complete relearn.

IF NOT EQUIPPED WITH IDRIVE (FOR SOME MODELS):
1. Ensure all tires are inflated to the pressure listed on the tire placard.
2. Start engine.
3. Hold down the TPMS Reset button (located under the hazards button or in front of the gear selector) until the TPMS light in the gauge cluster illuminates. Button may use initials ROE on some models.
4. Vehicle must be driven for up to 20 minutes above 20mph to complete relearn.

TPMS RESET BMW X6 2015 Tire Pressure Monitoring System Reset Guide
IF EQUIPPED WITH IDRIVE:
1. Ensure all tires are inflated to the pressure listed on the tire placard.
2. Turn ignition to the ON position (engine off).
3. Using the iDrive controller, select "Settings" or "Vehicle Info".
4. Select "Vehicle", "Vehicle/Tires" or "Vehicle Status".
5. Select "TPM", "Reset TPM", or "Perform Reset".
6. Start the engine, select "Reset", "Yes".
7. Vehicle must be driven for up to 20 minutes above 20mph to complete relearn.

IF NOT EQUIPPED WITH IDRIVE:
1. Ensure all tires are inflated to the pressure listed on the tire placard.
2. Start engine.
3. Move turn signal toggle switch up or down until TPMS indicator and "RESET" are displayed.
4. Press button at end of turn signal lever.
5. Press and hold button at end of turn signal lever until "RESETIING" or a checkmark is displayed.
6. Vehicle must be driven for up to 20 minutes above 20mph to complete relearn.

IF NOT EQUIPPED WITH IDRIVE (FOR SOME MODELS):
1. Ensure all tires are inflated to the pressure listed on the tire placard.
2. Start engine.
3. Hold down the TPMS Reset button (located under the hazards button or in front of the gear selector) until the TPMS light in the gauge cluster illuminates. Button may use initials ROE on some models.
4. Vehicle must be driven for up to 20 minutes above 20mph to complete relearn.

TPMS RESET BMW Z Series 2007-2011 Tire Pressure Monitoring System Reset Guide
IF EQUIPPED WITH IDRIVE:
1. Ensure all tires are inflated to the pressure listed on the tire placard.
2. Turn ignition to the ON position (engine off).
3. Using the iDrive controller, select "Settings" or "Vehicle Info".
4. Select "Vehicle", "Vehicle/Tires" or "Vehicle Status".
5. Select "TPM", "Reset TPM", or "Perform Reset".
6. Start the engine, select "Reset", "Yes".
7. Vehicle must be driven for up to 20 minutes above 20mph to complete relearn.

IF NOT EQUIPPED WITH IDRIVE:
1. Ensure all tires are inflated to the pressure listed on the tire placard.
2. Start engine.
3. Move turn signal toggle switch up or down until TPMS indicator and "RESET" are displayed.
4. Press button at end of turn signal lever.
5. Press and hold button at end of turn signal lever until "RESETIING" or a checkmark is displayed.
6. Vehicle must be driven for up to 20 minutes above 20mph to complete relearn.

IF NOT EQUIPPED WITH IDRIVE (FOR SOME MODELS):
1. Ensure all tires are inflated to the pressure listed on the tire placard.
2. Start engine.
3. Hold down the TPMS Reset button (located under the hazards button or in front of the gear selector) until the TPMS light in the gauge cluster illuminates. Button may use initials ROE on some models.
4. Vehicle must be driven for up to 20 minutes above 20mph to complete relearn.

TPMS RESET BMW Z Series 2011-2014 Tire Pressure Monitoring System Reset Guide
IF EQUIPPED WITH IDRIVE:
1. Ensure all tires are inflated to the pressure listed on the tire placard.
2. Turn ignition to the ON position (engine off).
3. Using the iDrive controller, select "Settings" or "Vehicle Info".
4. Select "Vehicle", "Vehicle/Tires" or "Vehicle Status".
5. Select "TPM", "Reset TPM", or "Perform Reset".
6. Start the engine, select "Reset", "Yes".
7. Vehicle must be driven for up to 20 minutes above 20mph to complete relearn.

IF NOT EQUIPPED WITH IDRIVE:
1. Ensure all tires are inflated to the pressure listed on the tire placard.
2. Start engine.
3. Move turn signal toggle switch up or down until TPMS indicator and "RESET" are displayed.
4. Press button at end of turn signal lever.
5. Press and hold button at end of turn signal lever until "RESETIING" or a checkmark is displayed.
6. Vehicle must be driven for up to 20 minutes above 20mph to complete relearn.

IF NOT EQUIPPED WITH IDRIVE (FOR SOME MODELS):
1. Ensure all tires are inflated to the pressure listed on the tire placard.
2. Start engine.
3. Hold down the TPMS Reset button (located under the hazards button or in front of the gear selector) until the TPMS light in the gauge cluster illuminates. Button may use initials ROE on some models.
4. Vehicle must be driven for up to 20 minutes above 20mph to complete relearn.

TPMS RESET BMW Z4 2014 Tire Pressure Monitoring System Reset Guide
IF EQUIPPED WITH IDRIVE:
1. Ensure all tires are inflated to the pressure listed on the tire placard.
2. Turn ignition to the ON position (engine off).
3. Using the iDrive controller, select "Settings" or "Vehicle Info".
4. Select "Vehicle", "Vehicle/Tires" or "Vehicle Status".
5. Select "TPM", "Reset TPM", or "Perform Reset".
6. Start the engine, select "Reset", "Yes".
7. Vehicle must be driven for up to 20 minutes above 20mph to complete relearn.

IF NOT EQUIPPED WITH IDRIVE:
1. Ensure all tires are inflated to the pressure listed on the tire placard.
2. Start engine.
3. Move turn signal toggle switch up or down until TPMS indicator and "RESET" are displayed.
4. Press button at end of turn signal lever.
5. Press and hold button at end of turn signal lever until "RESETIING" or a checkmark is displayed.
6. Vehicle must be driven for up to 20 minutes above 20mph to complete relearn.

IF NOT EQUIPPED WITH IDRIVE (FOR SOME MODELS):
1. Ensure all tires are inflated to the pressure listed on the tire placard.
2. Start engine.
3. Hold down the TPMS Reset button (located under the hazards button or in front of the gear selector) until the TPMS light in the gauge cluster illuminates. Button may use initials ROE on some models.
4. Vehicle must be driven for up to 20 minutes above 20mph to complete relearn.