TPMS Reset - Audi Cars TPMS Reset Guide

TPMS Reset - Audi Cars Tire Pressure Monitoring System Reset Guide

 QUICK INFORMATION ABOUT THIS CAR MANUFACTURER.

Audi AG is a German automobile manufacturer that designs, engineers, produces, markets and distributes luxury vehicles. Audi is a member of the Volkswagen Group and has its roots at Ingolstadt, Bavaria, Germany. Audi-branded vehicles are produced in nine production facilities worldwide.

The origins of the company are complex, going back to the early 20th century and the initial enterprises (Horch and the Audiwerke) founded by engineer August Horch; and two other manufacturers (DKW and Wanderer), leading to the foundation of Auto Union in 1932. The modern era of Audi essentially began in the 1960s when Auto Union was acquired by Volkswagen from Daimler-Benz. After relaunching the Audi brand with the 1965 introduction of the Audi F103 series, Volkswagen merged Auto Union with NSU Motorenwerke in 1969, thus creating the present day form of the company.

The company name is based on the Latin translation of the surname of the founder, August Horch. "Horch", meaning "listen" in German, becomes "audi" in Latin. The four rings of the Audi logo each represent one of four car companies that banded together to create Audi's predecessor company, Auto Union. Audi's slogan is Vorsprung durch Technik, meaning "Advancement through Technology". However, Audi USA had used the slogan "Truth in Engineering" from 2007 to 2016, and have not used the slogan since 2016. Audi, along with BMW and Mercedes-Benz, are among the best-selling luxury automobile brands in the world.

Audi A3 2006-2011 TPMS Reset Tire Pressure Monitoring System Reset
1. Inflate all tires to pressure indicated on tire placard.
2. Turn ignition to ON/RUN position (engine off).
3. Hold down the "SET" button located between the A/C and radio controls, or near the gear selector until a chime is heard.
4. Drive vehicle above 30mph for at least 30 minutes.


Audi A4 2012-2014 TPMS Reset Tire Pressure Monitoring System Reset
1. Inflate all tires to pressure indicated on tire placard.
2. Turn ignition to ON/RUN position (engine off).
3. Press CAR or MENU button by the gear selector.
4. Rotate MENU knob to position arrow by SET, Tire Pressure Monitoring, or Car (depending on exact model trim).
5. Press MENU knob.
6. Move arrow to TIRE PRESSURE, only if selecting the Car option mentioned in Step 4.
7. Press MENU knob.
8. Move arrow to STORE PRESSURES.
9. Press MENU knob, a check mark will appear to signal relearn completion.
10.Exit out of tire menu. Vehicle will need to be driven several minutes to complete relearn process.


Audi A4 Cabrio 2003-2012 TPMS Reset Tire Pressure Monitoring System Reset
1. Inflate all tires to pressure listed on tire placard.
2. Press CAR function button, or select "SET" on the driver's information screen.
3. Select TIRE PRESSURE MONITORING.
4. Select WHEEL CHANGE (select STORE CURR TIRE PRESSURES if resetting tire pressures).
5. Relearn can take 20 minutes to complete.


Audi A4 4 Door 2009-2012 TPMS Reset Tire Pressure Monitoring System Reset
1. Inflate all tires to pressure listed on tire placard.
2. Hold down RESET button (on end of wiper lever) until DISPLAY TYPE is displayed.
3. Press button on end of wiper lever to select SET.
4. Press RESET button.
5. Press button on end of wiper lever to select TIRE PRESSURE
6. Press RESET button.
7. Press button on end of wiper lever to select WHEEL CHANGE (select STORE PRESSURES if resetting air pressure).
8. Press RESET button. Relearn can take 20 minutes to complete.


Audi A4 & S4 2012-2015 TPMS Reset Tire Pressure Monitoring System Reset
1. Inflate all tires to pressure indicated on tire placard.
2. Turn ignition to ON/RUN position (engine off).
3. Press CAR or MENU button by the gear selector.
4. Rotate MENU knob to position arrow by SET, Tire Pressure Monitoring, or Car (depending on exact model trim).
5. Press MENU knob.
6. Move arrow to TIRE PRESSURE, only if selecting the Car option mentioned in Step 4.
7. Press MENU knob.
8. Move arrow to STORE PRESSURES.
9. Press MENU knob, a check mark will appear to signal relearn completion.
10.Exit out of tire menu. Vehicle will need to be driven several minutes to complete relearn process.


Audi A5 & S5 2008-2012 TPMS Reset Tire Pressure Monitoring System Reset
1. Inflate all tires to pressure listed on tire placard.
2. Turn ignition to ON/RUN position (engine off).
3. Press CAR function button.
4. Select TIRE PRESSURE MONITORING.
5. Select INITIALIZE WHEELS (select STORE CURR TIRE PRESSURES if resetting tire pressures).
6. Relearn can take 20 minutes to complete.


Audi A5 & S5 2012-2015 TPMS Reset Tire Pressure Monitoring System Reset
METHOD 1
1. Inflate all tires to pressure indicated on tire placard.
2. Turn ignition to ON/RUN position (engine off).
3. Press CAR or MENU button by the gear selector.
4. Rotate MENU knob to position arrow by SET, Tire Pressure Monitoring, or Car (depending on exact model trim).
5. Press MENU knob.
6. Move arrow to TIRE PRESSURE, only if selecting the Car option mentioned in Step 4.
7. Press MENU knob.
8. Move arrow to STORE PRESSURES.
9. Press MENU knob, a check mark will appear to signal relearn completion.
10.Exit out of tire menu. Vehicle will need to be driven several minutes to complete relearn process.
METHOD 2
1. Inflate all tires to pressure indicated on tire placard.
2. Turn ignition to ON/RUN position (engine off).
3. Enter tire pressure mode.
4. Press media control, located on center console.
5. Let vehicle sit for 20 minutes.
6. After 20 minutes, vehicle must be driven above 25mph for 10 minutes.


Audi A6 & S6 2005-2012 TPMS Reset Tire Pressure Monitoring System Reset
1. Inflate all tires to pressure indicated on tire placard.
2. Turn ignition to ON/RUN position (engine off).
3. Press CAR or MENU button by the gear selector.
4. Rotate MENU knob to position arrow by SET, Tire Pressure Monitoring, or Car (depending on exact model trim).
5. Press MENU knob.
6. Move arrow to TIRE PRESSURE, only if selecting the Car option mentioned in Step 4.
7. Press MENU knob.
8. Move arrow to STORE PRESSURES.
9. Press MENU knob, a check mark will appear to signal relearn completion.
10.Exit out of tire menu. Vehicle will need to be driven several minutes to complete relearn process.


Audi A6 & s6 2009-2015 TPMS Reset Tire Pressure Monitoring System Reset
1. Inflate all tires to pressure indicated on tire placard.
2. Turn ignition to ON/RUN position (engine off).
3. Press CAR or MENU button by the gear selector.
4. Rotate MENU knob to position arrow by SET, Tire Pressure Monitoring, or Car (depending on exact model trim).
5. Press MENU knob.
6. Move arrow to TIRE PRESSURE, only if selecting the Car option mentioned in Step 4.
7. Press MENU knob.
8. Move arrow to STORE PRESSURES.
9. Press MENU knob, a check mark will appear to signal relearn completion.
10.Exit out of tire menu. Vehicle will need to be driven several minutes to complete relearn process.


Audi A8 2004-2011 TPMS Reset Tire Pressure Monitoring System Reset
1. Inflate all tires to pressure listed on tire placard.
2. Turn ignition to ON/RUN position (engine off).
3. Press CAR function button.
4. Select TIRE PRESSURE MONITORING.
5. Select INITIALIZE WHEELS (select STORE CURR TIRE PRESSURES if resetting tire pressures).
6. Relearn can take 20 minutes to complete.


Audi A8-S8 2010-2015 TPMS Reset Tire Pressure Monitoring System Reset
1. Inflate all tires to pressure indicated on tire placard.
2. Turn ignition to ON/RUN position (engine off).
3. Press CAR or MENU button by the gear selector.
4. Rotate MENU knob to position arrow by SET, Tire Pressure Monitoring, or Car (depending on exact model trim).
5. Press MENU knob.
6. Move arrow to TIRE PRESSURE, only if selecting the Car option mentioned in Step 4.
7. Press MENU knob.
8. Move arrow to STORE PRESSURES.
9. Press MENU knob, a check mark will appear to signal relearn completion.
10.Exit out of tire menu. Vehicle will need to be driven several minutes to complete relearn process.


Audi Q5 2009-2012 TPMS Reset Tire Pressure Monitoring System Reset
1. Inflate all tires to pressure listed on tire placard.
2. Turn ignition to ON/RUN position (engine off).
3. Press CAR function button.
4. Select TIRE PRESSURE MONITORING.
5. Select INITIALIZE WHEELS (select STORE CURR TIRE PRESSURES if resetting tire pressures).
6. Relearn can take 20 minutes to complete.


Audi Q5 2009-2015 TPMS Reset Tire Pressure Monitoring System Reset
1. Inflate all tires to pressure indicated on tire placard.
2. Turn ignition to ON/RUN position (engine off).
3. Press CAR or MENU button by the gear selector.
4. Rotate MENU knob to position arrow by SET, Tire Pressure Monitoring, or Car (depending on exact model trim).
5. Press MENU knob.
6. Move arrow to TIRE PRESSURE, only if selecting the Car option mentioned in Step 4.
7. Press MENU knob.
8. Move arrow to STORE PRESSURES.
9. Press MENU knob, a check mark will appear to signal relearn completion.
10.Exit out of tire menu. Vehicle will need to be driven several minutes to complete relearn process.


Audi Q7 2007-2012 TPMS Reset Tire Pressure Monitoring System Reset
1. Inflate all tires to pressure listed on tire placard.
2. Turn ignition to ON/RUN position (engine off).
3. Press CAR function button.
4. Select TIRE PRESSURE MONITORING.
5. Select INITIALIZE WHEELS (select STORE CURR TIRE PRESSURES if resetting tire pressures).
6. Relearn can take 20 minutes to complete.


Audi Q7 2010-2015 TPMS Reset Tire Pressure Monitoring System Reset
1. Inflate all tires to pressure indicated on tire placard.
2. Turn ignition to ON/RUN position (engine off).
3. Press CAR or MENU button by the gear selector.
4. Rotate MENU knob to position arrow by SET, Tire Pressure Monitoring, or Car (depending on exact model trim).
5. Press MENU knob.
6. Move arrow to TIRE PRESSURE, only if selecting the Car option mentioned in Step 4.
7. Press MENU knob.
8. Move arrow to STORE PRESSURES.
9. Press MENU knob, a check mark will appear to signal relearn completion.
10.Exit out of tire menu. Vehicle will need to be driven several minutes to complete relearn process.


Audi R8 2008-2015 TPMS Reset Tire Pressure Monitoring System Reset
1. Inflate all tires to pressure listed on tire placard.
2. Turn ignition to ON/RUN position (engine off).
3. Press CAR function button.
4. Select TIRE PRESSURE MONITORING.
5. Select INITIALIZE WHEELS (select STORE CURR TIRE PRESSURES if resetting tire pressures).
6. Relearn can take 20 minutes to complete.


Audi R8 2013-2015 TPMS Reset Tire Pressure Monitoring System Reset
1. Inflate all tires to pressure indicated on tire placard.
2. Turn ignition to ON/RUN position (engine off).
3. Press CAR or MENU button by the gear selector.
4. Rotate MENU knob to position arrow by SET, Tire Pressure Monitoring, or Car (depending on exact model trim).
5. Press MENU knob.
6. Move arrow to TIRE PRESSURE, only if selecting the Car option mentioned in Step 4.
7. Press MENU knob.
8. Move arrow to STORE PRESSURES.
9. Press MENU knob, a check mark will appear to signal relearn completion.
10.Exit out of tire menu. Vehicle will need to be driven several minutes to complete relearn process.


Audi RS4 2007-2008 TPMS Reset Tire Pressure Monitoring System Reset
1. Inflate all tires to pressure listed on tire placard.
2. Press CAR function button, or select "SET" on the driver's information screen.
3. Select TIRE PRESSURE MONITORING.
4. Select WHEEL CHANGE (select STORE CURR TIRE PRESSURES if resetting tire pressures).
5. Relearn can take 20 minutes to complete.


Audi RS7 2014-2015 TPMS Reset Tire Pressure Monitoring System Reset
1. Inflate all tires to pressure listed on tire placard.
2. Turn ignition to ON/RUN position (engine off).
3. Press CAR function button.
4. Select TIRE PRESSURE MONITORING.
5. Select INITIALIZE WHEELS (select STORE CURR TIRE PRESSURES if resetting tire pressures).
6. Relearn can take 20 minutes to complete.


Audi S4 2004-2011 TPMS Reset Tire Pressure Monitoring System Reset
1. Inflate all tires to pressure listed on tire placard.
2. Press CAR function button, or select "SET" on the driver's information screen.
3. Select TIRE PRESSURE MONITORING.
4. Select WHEEL CHANGE (select STORE CURR TIRE PRESSURES if resetting tire pressures).
5. Relearn can take 20 minutes to complete.


Audi S8 2007-2009 TPMS Reset Tire Pressure Monitoring System Reset
1. Inflate all tires to pressure listed on tire placard.
2. Turn ignition to ON/RUN position (engine off).
3. Press CAR function button.
4. Select TIRE PRESSURE MONITORING.
5. Select INITIALIZE WHEELS (select STORE CURR TIRE PRESSURES if resetting tire pressures).
6. Relearn can take 20 minutes to complete.


Audi SQ5 2014-2015 TPMS Reset Tire Pressure Monitoring System Reset
1. Inflate all tires to pressure indicated on tire placard.
2. Turn ignition to ON/RUN position (engine off).
3. Press CAR or MENU button by the gear selector.
4. Rotate MENU knob to position arrow by SET, Tire Pressure Monitoring, or Car (depending on exact model trim).
5. Press MENU knob.
6. Move arrow to TIRE PRESSURE, only if selecting the Car option mentioned in Step 4.
7. Press MENU knob.
8. Move arrow to STORE PRESSURES.
9. Press MENU knob, a check mark will appear to signal relearn completion.
10.Exit out of tire menu. Vehicle will need to be driven several minutes to complete relearn process.


Audi TT 2008-2012 TPMS Reset Tire Pressure Monitoring System Reset
1. Inflate all tires to pressure indicated on tire placard.
2. Turn ignition to ON/RUN position (engine off).
3. Hold down the "SET" button located between the A/C and radio controls, or near the gear selector until a chime is heard.
4. Drive vehicle above 30mph for at least 30 minutes.


Audi TT 2009-2015 TPMS Reset Tire Pressure Monitoring System Reset
1. Inflate all tires to pressure indicated on tire placard.
2. Turn ignition to ON/RUN position (engine off).
3. Press CAR or MENU button by the gear selector.
4. Rotate MENU knob to position arrow by SET, Tire Pressure Monitoring, or Car (depending on exact model trim).
5. Press MENU knob.
6. Move arrow to TIRE PRESSURE, only if selecting the Car option mentioned in Step 4.
7. Press MENU knob.
8. Move arrow to STORE PRESSURES.
9. Press MENU knob, a check mark will appear to signal relearn completion.
10.Exit out of tire menu. Vehicle will need to be driven several minutes to complete relearn process.