Best Guide Ford E-Series TPMS Reset

Best Guide Ford E-Series TPMS Reset

||||||||||||||||||||||||||
1. Turn ignition to ON position (engine off).
2. Press vehicle information button on the DIC until the message LEARN TIRE POSITIONS is displayed.
3. Press the SET/RESET button to enable vehicle learn mode. The horn will sound twice to indicate the vehicle has entered learn mode and the DIC will display the message TIRE LEARNING ACTIVE.
4. Starting at the LF tire, increase/decrease pressure until horn sounds.
5. After horn sounds, proceed as in step 4 for the next 3 sensors in the following order:  RF, RR, LR.
6. After LR sensor has been learned the horn will sound twice, turn ignition to OFF position.
7. Adjust all tires to pressure listed on tire placard.
*If DIC will not enable vehicle learn mode, then see procedure 6.
||||||||||||||||||||||||||