Simple Way to Reset Oil Service indicator in Honda Odyssey

Maintenance Required Lamp/Indicator: Service and Repair
Resetting the Oil Life Display
Except Touring Models
Reset the display after completing the required maintenance service. You will see "OIL LIFE 100" on the information display the next time you turn the ignition switch to the ON (II) position.
Reset the Maintenance Minder as follows:
1.Turn the ignition switch to the ON (II) position.
2.Press the select/reset knob repeatedly until the engine oil life is displayed.
3.Press the select/reset knob for about 10 seconds. The information display shows the reset mode initial display as shown. 4.Select the "OIL LIFE" display by pressing and releasing the select/reset knob. Press the same knob for a few seconds to enter this setting.
4.Select "RESET" by pressing the INFO button, then press the SEL/RESET button to reset the engine oil life display. The maintenance item code(s) will disappear, and the engine oil life will reset to "100." If you want to cancel the oil life reset mode, select "CANCEL."
Important Maintenance Instructions If you have the required service done but do not reset the display, or reset the display without doing the service, the system will not show the correct maintenance intervals. This can lead to serious mechanical problems because you will no longer have an accurate record of when maintenance is needed.

THANK YOU!