Best Guide Chevrolet Tahoe TPMS Reset Guide

Best Guide Chevrolet Tahoe TPMS Reset Guide

1. Apply parking brake. Turn ignition to ON position (engine off).
2. Turn headlight switch from OFF to parking lamps 4 times within 4 seconds. A double horn chirp
will sound and the TPMS telltale will begin blinking to indicate the learn mode is enabled.
3. Starting at the LF tire, increase/decrease pressure until horn sounds.
4. After horn sounds, procede as in step 3 for the next 3 sensors in the following order:  RF, RR, LR.
5. After LR sensor has been learned, turn ignition to OFF position. Adjust all tires to pressure listed on tire placard.
*If headlight switch does not enable TPMS Learn Mode, press the vehicle information
button on the DIC until vehicle learn mode option is displayed."                                                                                                                               

Best Guide Chevrolet Suburban TPMS Reset Guide

Best Guide Chevrolet Suburban TPMS Reset Guide

1. Apply parking brake. Turn ignition to ON position (engine off).
2. Turn headlight switch from OFF to parking lamps 4 times within 4 seconds. A double horn chirp
will sound and the TPMS telltale will begin blinking to indicate the learn mode is enabled.
3. Starting at the LF tire, increase/decrease pressure until horn sounds.
4. After horn sounds, procede as in step 3 for the next 3 sensors in the following order:  RF, RR, LR.
5. After LR sensor has been learned, turn ignition to OFF position. Adjust all tires to pressure listed on tire placard.
*If headlight switch does not enable TPMS Learn Mode, press the vehicle information
button on the DIC until vehicle learn mode option is displayed."                                                                                                                              
 

Best Guide Chevrolet Silverado TPMS Reset Guide

Best Guide Chevrolet Silverado TPMS Reset Guide

1. Apply parking brake. Turn ignition to ON position (engine off).
2. Turn headlight switch from OFF to parking lamps 4 times within 4 seconds. A double horn chirp
will sound and the TPMS telltale will begin blinking to indicate the learn mode is enabled.
3. Starting at the LF tire, increase/decrease pressure until horn sounds.
4. After horn sounds, procede as in step 3 for the next 3 sensors in the following order:  RF, RR, LR.
5. After LR sensor has been learned, turn ignition to OFF position. Adjust all tires to pressure listed on tire placard.
*If headlight switch does not enable TPMS Learn Mode, press the vehicle information
button on the DIC until vehicle learn mode option is displayed."                                                                                                                              
 

Best Guide Chevrolet Colorado TPMS Reset Guide

Best Guide Chevrolet Colorado TPMS Reset Guide

1. Apply parking brake. Turn ignition to ON position (engine off).
2. Turn headlight switch from OFF to parking lamps 4 times within 4 seconds. A double horn chirp
will sound and the TPMS telltale will begin blinking to indicate the learn mode is enabled.
3. Starting at the LF tire, increase/decrease pressure until horn sounds.
4. After horn sounds, procede as in step 3 for the next 3 sensors in the following order:  RF, RR, LR.
5. After LR sensor has been learned, turn ignition to OFF position. Adjust all tires to pressure listed on tire placard.
*If headlight switch does not enable TPMS Learn Mode, press the vehicle information
button on the DIC until vehicle learn mode option is displayed."                                                                                                                               

Best Guide Chevrolet SSR TPMS Reset Guide

Best Guide Chevrolet SSR TPMS Reset Guide

 1. Apply parking brake. Turn ignition to ON position (engine off).
2. Turn headlight switch from OFF to parking lamps 4 times within 4 seconds. A double horn chirp
will sound and the TPMS telltale will begin blinking to indicate the learn mode is enabled.
3. Starting at the LF tire, increase/decrease pressure until horn sounds.
4. After horn sounds, procede as in step 3 for the next 3 sensors in the following order:  RF, RR, LR.
5. After LR sensor has been learned, turn ignition to OFF position. Adjust all tires to pressure listed on tire placard.
*If headlight switch does not enable TPMS Learn Mode, press the vehicle information
button on the DIC until vehicle learn mode option is displayed."                                                                                                                               

Best Guide Chevrolet Avalanche TPMS Reset Guide

Best Guide Chevrolet Avalanche TPMS Reset Guide

1. Apply parking brake. Turn ignition to ON position (engine off).
2. Turn headlight switch from OFF to parking lamps 4 times within 4 seconds. A double horn chirp
will sound and the TPMS telltale will begin blinking to indicate the learn mode is enabled.
3. Starting at the LF tire, increase/decrease pressure until horn sounds.
4. After horn sounds, procede as in step 3 for the next 3 sensors in the following order:  RF, RR, LR.
5. After LR sensor has been learned, turn ignition to OFF position. Adjust all tires to pressure listed on tire placard.
*If headlight switch does not enable TPMS Learn Mode, press the vehicle information
button on the DIC until vehicle learn mode option is displayed."                                                                                                                               

Best Guide Ford Ecosport TPMS Reset Instruction

Best Guide Ford Ecosport TPMS Reset Instruction

||||||||||||||||    WITH STANDARD IGNITION:
1. Inflate all tires to pressure listed on tire placard.
2. Turn ignition to OFF position and press and release brake pedal.
3. Cycle ignition from OFF to RUN position 3 times, ending in RUN position.
4. Press and release brake pedal.
5. Turn ignition to OFF position.
6. Cycle ignition from OFF to RUN position 3 times, ending in RUN position.
7. Horn will sound once and TPMS telltale will blink once train mode is initiated.  If equipped with message center, it will display TRAIN LF TIRE.  Place antennae of learn tool on sidewall of LF tire 180° from valve stem to activate sensor.  Horn will sound once sensor has been recognized.
Repeat step for RF, RR, and LR tires.
8. After training LR tire, the message center will display TRAINING MODE COMPLETE.  If the vehicle is not equipped with the message center display, successful completion can be verified by turning the ignition to the OFF position and not hearing the horn sound.  If the horn sounds, the
training procedure must be repeated.
**WITH INTEGRATED KEY FOB (ACTUAL KEY CONTAINED IN KEY FOB) PUSH-BUTTON
START:
1. With vehicle off, press and release the brake pedal.
2. Using the push button, press and hold the button until the vehicle is in accessory mode (ACC mode). WARNING:  DO NOT PUSH AND RELEASE TOO QUICKLY…PUSH--WAIT FOR SOUND--RELEASE.
3. Power off by pushing the button 1 time.
4. Repeat 2 more times, ending in ACC mode.
5. Press and release the brake pedal, then turn vehicle off.
6. Using the push button, press and hold the button until the vehicle is in accessory mode.
7. Power off by pushing the button 1 time.
8. Repeat 2 more times, ending in ACC mode.
9. Horn will sound once the TPMS telltale will blink once train mode is initiated.  If equipped with message center, it will display TRAIN LF TIRE.
10. Starting at LF tire, decrease air pressure until horn chirps.  Repeat procedure for remaining tires in the following order:  RF, RR, and LR.  If equipped with banded sensors, place antennae of learn tool on sidewall of LF tire 180° from valve stem to activate sensor.  Horn will sound once
sensor has been recognized.  Repeat step for RF, RR, and LR tires.
11. After successfully programming the LR tire, the message center should display "TRAINING COMPLETE."
12. Inflate all tires to pressure listed on tire placard.
***WITH INTELLIGENT ASSIST IGNITION SYSTEM (NO ACTUAL KEY CONTAINED IN KEY FOB): 1. With vehicle off, press and release the brake pedal.
2. Using the push button, press once to turn on, then press again to put vehicle into ACC mode, then press again to turn vehicle off.
3. Repeat 2 more times, ending in ACC mode.
4. Press and release the brake pedal, then turn vehicle off.
5. Using the push button, press once to turn on, then press again to put vehicle into ACC mode, then press again to turn vehicle off.
6. Repeat 2 more times, ending in ACC mode.
7. Horn will sound once and TPMS telltale will blink once train mode is initiated.  If equipped with message center, it will display TRAIN LF TIRE.
8. Starting at LF tire, decrease air pressure until horn chirps.  Repeat procedure for remaining tires in the following order:  RF, RR, and LR.  If equipped with banded sensors, place antennae of learn tool on sidewall of LF tire 180° from valve stem to activate sensor.  Horn will sound once
sensor has been recognized.  Repeat step for RF, RR, and LR tires.
9. After successfully programming the LR tire, the message center should display "TRAINING COMPLETE."
10. Inflate all tires to pressure listed on tire placard.
||||||||||||||||

IF THE ABOVE TUTORIAL FAIL! PLEASE FOLLOW THE INSTRUCTION BELOW! 

• Make sure the vehicle is at a complete stop
• Turn the engine switch off
• Adjust the tire inflation pressure recommended on the tire placard located on the door panel.
• Turn the engine switch to the “ON” position
• Use the information display controls on the steering wheel and highlight Setting Menu
• Press the OK button to choose it
• Select Driver Assist
• Select Tire Monitor and press and hold the OK button until confirmation appears.

Best Guide Ford E-Series TPMS Reset

Best Guide Ford E-Series TPMS Reset

||||||||||||||||||||||||||
1. Turn ignition to ON position (engine off).
2. Press vehicle information button on the DIC until the message LEARN TIRE POSITIONS is displayed.
3. Press the SET/RESET button to enable vehicle learn mode. The horn will sound twice to indicate the vehicle has entered learn mode and the DIC will display the message TIRE LEARNING ACTIVE.
4. Starting at the LF tire, increase/decrease pressure until horn sounds.
5. After horn sounds, proceed as in step 4 for the next 3 sensors in the following order:  RF, RR, LR.
6. After LR sensor has been learned the horn will sound twice, turn ignition to OFF position.
7. Adjust all tires to pressure listed on tire placard.
*If DIC will not enable vehicle learn mode, then see procedure 6.
||||||||||||||||||||||||||

Best Guide F-450 F-550 2008-2010 TPMS Reset

Best Guide F-450 F-550 2008-2010 TPMS Reset

||||||||||||||||||||||||||
1. Turn ignition to ON position (engine off).
2. Press vehicle information button on the DIC until the message LEARN TIRE POSITIONS is displayed.
3. Press the SET/RESET button to enable vehicle learn mode. The horn will sound twice to indicate the vehicle has entered learn mode and the DIC will display the message TIRE LEARNING ACTIVE.
4. Starting at the LF tire, increase/decrease pressure until horn sounds.
5. After horn sounds, proceed as in step 4 for the next 3 sensors in the following order:  RF, RR, LR.
6. After LR sensor has been learned the horn will sound twice, turn ignition to OFF position.
7. Adjust all tires to pressure listed on tire placard.
*If DIC will not enable vehicle learn mode, then see procedure 6.
||||||||||||||||||||||||||

Best Guide F-150 F250 2008-2010 TPMS Reset

Best Guide F-150 F250 2008-2010 TPMS Reset

||||||||||||||||||||||||||
1. Turn ignition to ON position (engine off).
2. Press vehicle information button on the DIC until the message LEARN TIRE POSITIONS is displayed.
3. Press the SET/RESET button to enable vehicle learn mode. The horn will sound twice to indicate the vehicle has entered learn mode and the DIC will display the message TIRE LEARNING ACTIVE.
4. Starting at the LF tire, increase/decrease pressure until horn sounds.
5. After horn sounds, proceed as in step 4 for the next 3 sensors in the following order:  RF, RR, LR.
6. After LR sensor has been learned the horn will sound twice, turn ignition to OFF position.
7. Adjust all tires to pressure listed on tire placard.
*If DIC will not enable vehicle learn mode, then see procedure 6.
||||||||||||||||||||||||||

Best Guide Ford F-150 2008-2010 TPMS Reset

Best Guide Ford F-150 2008-2010 TPMS Reset 

||||||||||||||||||||||||||
1. Turn ignition to ON position (engine off).
2. Press vehicle information button on the DIC until the message LEARN TIRE POSITIONS is displayed.
3. Press the SET/RESET button to enable vehicle learn mode. The horn will sound twice to indicate the vehicle has entered learn mode and the DIC will display the message TIRE LEARNING ACTIVE.
4. Starting at the LF tire, increase/decrease pressure until horn sounds.
5. After horn sounds, proceed as in step 4 for the next 3 sensors in the following order:  RF, RR, LR.
6. After LR sensor has been learned the horn will sound twice, turn ignition to OFF position.
7. Adjust all tires to pressure listed on tire placard.
*If DIC will not enable vehicle learn mode, then see procedure 6.
||||||||||||||||||||||||||

Best Guide Ford Freestar 2004-2005 TPMS Reset

Best Guide Ford Freestar 2004-2005 TPMS Reset

Inflate all tires to pressure listed on tire placard. For models without message center: ● Press and hold odometer reset button until TIRE PRESSURE SET is displayed. ● Hold button for 3 more seconds. ● TPMS telltale will then begin to blink to signal completion of reset process. For models with message center: ● Press and hold SETUP button until RESET FOR SYSTEM CHECK is displayed. ● Press and hold RESET button until HOLD RESET TO RELEARN is displayed.

Best Guide Ford Crown Victoria TPMS Reset

Best Guide Ford Crown Victoria TPMS Reset

||||||||||||||||    WITH STANDARD IGNITION:
1. Inflate all tires to pressure listed on tire placard.
2. Turn ignition to OFF position and press and release brake pedal.
3. Cycle ignition from OFF to RUN position 3 times, ending in RUN position.
4. Press and release brake pedal.
5. Turn ignition to OFF position.
6. Cycle ignition from OFF to RUN position 3 times, ending in RUN position.
7. Horn will sound once and TPMS telltale will blink once train mode is initiated.  If equipped with message center, it will display TRAIN LF TIRE.  Place antennae of learn tool on sidewall of LF tire 180° from valve stem to activate sensor.  Horn will sound once sensor has been recognized.
Repeat step for RF, RR, and LR tires.
8. After training LR tire, the message center will display TRAINING MODE COMPLETE.  If the vehicle is not equipped with the message center display, successful completion can be verified by turning the ignition to the OFF position and not hearing the horn sound.  If the horn sounds, the
training procedure must be repeated.
**WITH INTEGRATED KEY FOB (ACTUAL KEY CONTAINED IN KEY FOB) PUSH-BUTTON
START:
1. With vehicle off, press and release the brake pedal.
2. Using the push button, press and hold the button until the vehicle is in accessory mode (ACC mode). WARNING:  DO NOT PUSH AND RELEASE TOO QUICKLY…PUSH--WAIT FOR SOUND--RELEASE.
3. Power off by pushing the button 1 time.
4. Repeat 2 more times, ending in ACC mode.
5. Press and release the brake pedal, then turn vehicle off.
6. Using the push button, press and hold the button until the vehicle is in accessory mode.
7. Power off by pushing the button 1 time.
8. Repeat 2 more times, ending in ACC mode.
9. Horn will sound once the TPMS telltale will blink once train mode is initiated.  If equipped with message center, it will display TRAIN LF TIRE.
10. Starting at LF tire, decrease air pressure until horn chirps.  Repeat procedure for remaining tires in the following order:  RF, RR, and LR.  If equipped with banded sensors, place antennae of learn tool on sidewall of LF tire 180° from valve stem to activate sensor.  Horn will sound once
sensor has been recognized.  Repeat step for RF, RR, and LR tires.
11. After successfully programming the LR tire, the message center should display "TRAINING COMPLETE."
12. Inflate all tires to pressure listed on tire placard.
***WITH INTELLIGENT ASSIST IGNITION SYSTEM (NO ACTUAL KEY CONTAINED IN KEY FOB): 1. With vehicle off, press and release the brake pedal.
2. Using the push button, press once to turn on, then press again to put vehicle into ACC mode, then press again to turn vehicle off.
3. Repeat 2 more times, ending in ACC mode.
4. Press and release the brake pedal, then turn vehicle off.
5. Using the push button, press once to turn on, then press again to put vehicle into ACC mode, then press again to turn vehicle off.
6. Repeat 2 more times, ending in ACC mode.
7. Horn will sound once and TPMS telltale will blink once train mode is initiated.  If equipped with message center, it will display TRAIN LF TIRE.
8. Starting at LF tire, decrease air pressure until horn chirps.  Repeat procedure for remaining tires in the following order:  RF, RR, and LR.  If equipped with banded sensors, place antennae of learn tool on sidewall of LF tire 180° from valve stem to activate sensor.  Horn will sound once
sensor has been recognized.  Repeat step for RF, RR, and LR tires.
9. After successfully programming the LR tire, the message center should display "TRAINING COMPLETE."
10. Inflate all tires to pressure listed on tire placard.
||||||||||||||||