Nissan Maxima 6 Steps Oil Reset

Nissan Maxima 6 Steps Oil Reset

NISSAN MAXIMA 2006-2008 OIL RESET

1. Turn ignition ON.
2. Select “OK” by pressing the “ENTER” button.
3. Press the “TRIP” button and choose “MAINTENANCE” then “ENGINE OIL” and press “ENTER” button.
4. Press “BACK” button to back out of menu.
5. Turn ignition off

NISSAN MAXIMA 2009-2017 OIL RESET

1. Turn ignition to the “RUN” position (press the “START/STOP” button once).
2. Press the square button to display “SETTINGS” mode.
3. Press the circle button to move to “MAINTENANCE”.
4. Select “ENGINE OIL” and follow the prompts.
5. Repeat for “ENGINE OIL FILTER”.
6. Turn ignition off

 

The post Nissan Maxima 6 Steps Oil Reset appeared first on Mechanic Handbook.

Nissan Maxima 6 Steps Oil Reset

Nissan Maxima 6 Steps Oil Reset

NISSAN MAXIMA 2006-2008 OIL RESET

1. Turn ignition ON.
2. Select “OK” by pressing the “ENTER” button.
3. Press the “TRIP” button and choose “MAINTENANCE” then “ENGINE OIL” and press “ENTER” button.
4. Press “BACK” button to back out of menu.
5. Turn ignition off

NISSAN MAXIMA 2009-2017 OIL RESET

1. Turn ignition to the “RUN” position (press the “START/STOP” button once).
2. Press the square button to display “SETTINGS” mode.
3. Press the circle button to move to “MAINTENANCE”.
4. Select “ENGINE OIL” and follow the prompts.
5. Repeat for “ENGINE OIL FILTER”.
6. Turn ignition off

 

The post Nissan Maxima 6 Steps Oil Reset appeared first on Mechanic Handbook.

from WordPress http://ift.tt/2wyarQ6
via IFTTT

Nissan Interstar 3 steps Service light reset

Nissan Interstar 3 steps Service light reset

 

1. Switch ignition ON. Within 10 seconds:
2. Press and hold accelerator pedal fully depressed.
3. Press and release brake pedal 3 times.’Spanner’ symbol will go out.

NOTE: If the vehicle is serviced before the service interval indicator is displayed, carry out resetting procedure. The ‘spanner’ symbol will be displayed for 5 seconds to confirm resetting. Always check for any stored trouble codes as this may affect the resetting of the service interval indicator.

The post Nissan Interstar 3 steps Service light reset appeared first on Mechanic Handbook.

Nissan Juke Oil reset in 5 Steps

Nissan Juke Oil reset in 5 Steps

1. Turn the ignition key to position “ON” without starting the engine
2. There are 2 knob buttons on the dash, push the right one until spanner icon and the remaining distance to the next service starts flashing.
3. Then release it and turn off the ignition
4. Turn the ignition ON again and press and hold both buttons on the dash until the spanner symbol disappear.
5. Turn the ignition off and then start the engine to verify the indicator has been reset

 

The post Nissan Juke Oil reset in 5 Steps appeared first on Mechanic Handbook.

Nissan Interstar 3 steps Service light reset

Nissan Interstar 3 steps Service light reset

 

1. Switch ignition ON. Within 10 seconds:
2. Press and hold accelerator pedal fully depressed.
3. Press and release brake pedal 3 times.’Spanner’ symbol will go out.

NOTE: If the vehicle is serviced before the service interval indicator is displayed, carry out resetting procedure. The ‘spanner’ symbol will be displayed for 5 seconds to confirm resetting. Always check for any stored trouble codes as this may affect the resetting of the service interval indicator.

The post Nissan Interstar 3 steps Service light reset appeared first on Mechanic Handbook.

from WordPress http://ift.tt/2uhuJAs
via IFTTT

Nissan Juke Oil reset in 5 Steps

Nissan Juke Oil reset in 5 Steps

1. Turn the ignition key to position “ON” without starting the engine
2. There are 2 knob buttons on the dash, push the right one until spanner icon and the remaining distance to the next service starts flashing.
3. Then release it and turn off the ignition
4. Turn the ignition ON again and press and hold both buttons on the dash until the spanner symbol disappear.
5. Turn the ignition off and then start the engine to verify the indicator has been reset

 

The post Nissan Juke Oil reset in 5 Steps appeared first on Mechanic Handbook.

from WordPress http://ift.tt/2uxHNgo
via IFTTT

Nissan GT-R oil reset IN 7 Steps

Nissan GT-R oil reset IN 7 Steps

The Nissan GT-R is a 2-door 2+2 high performance vehicle produced by Nissan unveiled in 2007.] It is the successor to the Nissan Skyline GT-R although no longer part of the Skyline range itself, the name having been given over to the V35 Series and having since left its racing roots.

NISSAN GT-R OIL RESET FROM YEAR 2009-2017

1. Push ignition switch to the “ON” position, but do not start engine.
2. Use the “ENTER” button and toggle “SETTING” screen.
3. Use the “NEXT” button to select “MAINTENANCE” and press “ENTER” button.
4. Use “NEXT” button to choose “OIL” and press “ENTER” button.
5. Use “NEXT” button to choose “ENGINE OIL” and press “ENTER” button.
6. Return to “MAINTE-NANCE” menu use “NEXT” button to select “FILTER” and press “ENTER” button.
7. Turn ignition off

SIMPLE AS THAT.. DID YOU GET IT BUDDY?

The post Nissan GT-R oil reset IN 7 Steps appeared first on Mechanic Handbook.

from WordPress http://ift.tt/2vnGvtd
via IFTTT

Nissan GT-R oil reset IN 7 Steps

Nissan GT-R oil reset IN 7 Steps

The Nissan GT-R is a 2-door 2+2 high performance vehicle produced by Nissan unveiled in 2007.] It is the successor to the Nissan Skyline GT-R although no longer part of the Skyline range itself, the name having been given over to the V35 Series and having since left its racing roots.

NISSAN GT-R OIL RESET FROM YEAR 2009-2017

1. Push ignition switch to the “ON” position, but do not start engine.
2. Use the “ENTER” button and toggle “SETTING” screen.
3. Use the “NEXT” button to select “MAINTENANCE” and press “ENTER” button.
4. Use “NEXT” button to choose “OIL” and press “ENTER” button.
5. Use “NEXT” button to choose “ENGINE OIL” and press “ENTER” button.
6. Return to “MAINTE-NANCE” menu use “NEXT” button to select “FILTER” and press “ENTER” button.
7. Turn ignition off

SIMPLE AS THAT.. DID YOU GET IT BUDDY?

The post Nissan GT-R oil reset IN 7 Steps appeared first on Mechanic Handbook.

7 STEPS TO RESET OIL SERVICE REMINDER ON NISSAN FRONTIER

7 STEPS TO RESET OIL SERVICE REMINDER ON NISSAN FRONTIER

The Nissan Navara/Frontier is the name for the D22 and D40 generations of Nissan pickup trucks sold in Asia and Europe; and the name for all generations of the vehicles in Australia. In North, Central and South America it is sold as the Nissan Frontier. The D22 line began in 1997, replacing the D21 Nissan Navara truck. As of 2002, the D22 series pickup is no longer sold in Japan; the D22’s primary market being North America. It is currently built at the Nissan factory in Canton, Mississippi, United States.

For the Australian market, the D22 ran as a series 1 from the end of the D21 until 2003, when a series 2 was released with a new ZD30 Diesel engine and updated front end. The ZD30 powered D22’s were exceptionally reliable unlike the Patrol counterparts, but were replaced in 2008 with an upgraded Common Rail 2.5L Diesel engine. The D22 Navara was run in parallel with the larger D40 until 2015. Both were replaced by the D23 Navara – locally known as the NP300 Navara as of 2015. This is not the same NP300 as the rest of the world, confusingly. This D23 is rumoured to be the basis of the upcoming X series Mercedes-Benz utility vehicle.

Nissan was the pioneer of the “Hardbody” or “Nissan Frontier” since 1986. The first was the D21, considered to be a small pick up. After more than 10 years with the D21, the second generation Navara was manufactured from 1997 and went until 2004 which was classed as a compact sized pick up. It was replaced with the bigger, taller, longer D40, which Nissan now considers to be a mid-size pick up truck.

The Navara gets its name from the Navarre region of northern Spain, and the European version is built at the Nissan factory in Barcelona. In many European markets it is sold as the Nissan NP300.

1. Turn ignition to the “RUN” position.
2. The wrench symbol light will turn on for about 5 seconds, then turn off.
3. Press the “TRIP’ button and hold for 3 seconds during the time the wrench symbol is illuminated.
4. The symbol and distance display will begin to FLash and will show the current interval.
5. Press the “TRIP” button to increase the interval distance.
6. Set to desired distance (up to 30,000km).
7. Turn ignition off

Thank you!

The post 7 STEPS TO RESET OIL SERVICE REMINDER ON NISSAN FRONTIER appeared first on Mechanic Handbook.

7 STEPS TO RESET OIL SERVICE REMINDER ON NISSAN FRONTIER

7 STEPS TO RESET OIL SERVICE REMINDER ON NISSAN FRONTIER

The Nissan Navara/Frontier is the name for the D22 and D40 generations of Nissan pickup trucks sold in Asia and Europe; and the name for all generations of the vehicles in Australia. In North, Central and South America it is sold as the Nissan Frontier. The D22 line began in 1997, replacing the D21 Nissan Navara truck. As of 2002, the D22 series pickup is no longer sold in Japan; the D22’s primary market being North America. It is currently built at the Nissan factory in Canton, Mississippi, United States.

For the Australian market, the D22 ran as a series 1 from the end of the D21 until 2003, when a series 2 was released with a new ZD30 Diesel engine and updated front end. The ZD30 powered D22’s were exceptionally reliable unlike the Patrol counterparts, but were replaced in 2008 with an upgraded Common Rail 2.5L Diesel engine. The D22 Navara was run in parallel with the larger D40 until 2015. Both were replaced by the D23 Navara – locally known as the NP300 Navara as of 2015. This is not the same NP300 as the rest of the world, confusingly. This D23 is rumoured to be the basis of the upcoming X series Mercedes-Benz utility vehicle.

Nissan was the pioneer of the “Hardbody” or “Nissan Frontier” since 1986. The first was the D21, considered to be a small pick up. After more than 10 years with the D21, the second generation Navara was manufactured from 1997 and went until 2004 which was classed as a compact sized pick up. It was replaced with the bigger, taller, longer D40, which Nissan now considers to be a mid-size pick up truck.

The Navara gets its name from the Navarre region of northern Spain, and the European version is built at the Nissan factory in Barcelona. In many European markets it is sold as the Nissan NP300.

1. Turn ignition to the “RUN” position.
2. The wrench symbol light will turn on for about 5 seconds, then turn off.
3. Press the “TRIP’ button and hold for 3 seconds during the time the wrench symbol is illuminated.
4. The symbol and distance display will begin to FLash and will show the current interval.
5. Press the “TRIP” button to increase the interval distance.
6. Set to desired distance (up to 30,000km).
7. Turn ignition off

Thank you!

The post 7 STEPS TO RESET OIL SERVICE REMINDER ON NISSAN FRONTIER appeared first on Mechanic Handbook.

from WordPress http://ift.tt/2vX9ocR
via IFTTT

7 Steps to reset oil service reminder of Nissan Armada

7 Steps to reset oil service reminder of Nissan Armada

The Nissan Armada is Nissan’s full-size SUV. It shares its body-on-frame F-Alpha platform with the Nissan Titan pickup truck, Nissan Xterra SUV, Nissan Frontier pickup truck, and Nissan Pathfinder SUV. An upscale version of the Armada was sold as the Infiniti QX56 from 2004 to 2010, when it switched to a platform based on the Nissan Patrol. From 2003 to 2015 the Armada was assembled in Canton, Mississippi, ceasing in 2015. From mid-2016 onwards, the Armada is currently built in Yukuhashi, Kyushu, Japan and share the same platform as the Patrol, with American-specific modifications, and went on sale in late Summer 2016 as a 2017 model.

NISSAN ARMADA 2005-2009 OIL RESET INSTRUCTION

1. Turn ignition to the “RUN” position.
2. Press the “INFO” button to choose “SETTINGS”.
3. Rotate the “INFO” button to choose “MAINTENANCE” and press the “INFO” button.
4. Rotate the “INFO” button to select “ENGINE OIL” and press the “INFO” button.
5. Select “RESET” and choose your new time or distance.
6. Repeat for “ENGINE OIL FILTER”.
7. Turn ignition off

NISSAN ARMADA 2010-2017 OIL RESET INSTRUCTION

1. Turn ignition to the “RUN” position.
2. Press the “INFO” button. Using the arrow keys, choose “MAINTENANCE”.
3. Select the “REMINDER”, and then follow the prompts to “RESET”.
4. Press the “INFO” button to exit to the main menu.
5. Turn ignition off

 

THANK YOU!

The post 7 Steps to reset oil service reminder of Nissan Armada appeared first on Mechanic Handbook.

7 Steps to reset oil service light of Nissan Cube

7 Steps to reset oil service light of Nissan Cube

 

The Nissan Cube is a mini MPV produced by Japanese carmaker Nissan since 1998. Initially sold only in Japan, the Cube has been sold in North American and European markets since 2009, although discontinued in Europe in 2011. In Japan, it is exclusive to Japanese Nissan dealerships called Nissan Red Stage locations. It is a slightly larger load carrying alternative to the Nissan March hatchback. Since 2014, the Cube has once again been sold only in Japan.

NISSAN CUBE OIL RESET INSTRUCTION FOR 2009-2013 YEAR MODEL.

1. Turn ignition to the “RUN” position.
2. The wrench symbol light will turn on for about 5 seconds, then turn off.
3. Press the “TRIP’ button and hold for 3 seconds during the time the wrench symbol is illuminated.
4. The symbol and distance display will begin to FLash and will show the current interval.
5. Press the “TRIP” button to increase the interval distance.
6. Set to desired distance (up to 30,000km).
7. Turn ignition off

THANK YOU!

The post 7 Steps to reset oil service light of Nissan Cube appeared first on Mechanic Handbook.

7 Steps to reset oil service reminder of Nissan Armada

7 Steps to reset oil service reminder of Nissan Armada

The Nissan Armada is Nissan’s full-size SUV. It shares its body-on-frame F-Alpha platform with the Nissan Titan pickup truck, Nissan Xterra SUV, Nissan Frontier pickup truck, and Nissan Pathfinder SUV. An upscale version of the Armada was sold as the Infiniti QX56 from 2004 to 2010, when it switched to a platform based on the Nissan Patrol. From 2003 to 2015 the Armada was assembled in Canton, Mississippi, ceasing in 2015. From mid-2016 onwards, the Armada is currently built in Yukuhashi, Kyushu, Japan and share the same platform as the Patrol, with American-specific modifications, and went on sale in late Summer 2016 as a 2017 model.

NISSAN ARMADA 2005-2009 OIL RESET INSTRUCTION

1. Turn ignition to the “RUN” position.
2. Press the “INFO” button to choose “SETTINGS”.
3. Rotate the “INFO” button to choose “MAINTENANCE” and press the “INFO” button.
4. Rotate the “INFO” button to select “ENGINE OIL” and press the “INFO” button.
5. Select “RESET” and choose your new time or distance.
6. Repeat for “ENGINE OIL FILTER”.
7. Turn ignition off

NISSAN ARMADA 2010-2017 OIL RESET INSTRUCTION

1. Turn ignition to the “RUN” position.
2. Press the “INFO” button. Using the arrow keys, choose “MAINTENANCE”.
3. Select the “REMINDER”, and then follow the prompts to “RESET”.
4. Press the “INFO” button to exit to the main menu.
5. Turn ignition off

 

THANK YOU!

The post 7 Steps to reset oil service reminder of Nissan Armada appeared first on Mechanic Handbook.

from WordPress http://ift.tt/2wd26Be
via IFTTT