Ford Mustang TPMS Reset Guide

Ford Mustang TPMS Reset Guide

The Ford Mustang is an American automobile manufactured by Ford. It was originally based on the platform of the second generation North American Ford Falcon, a compact car.The original 1962 Ford Mustang I two-seater concept car had evolved into the 1963 Mustang II four-seater concept car which Ford used to pretest how the public would take interest in the first production Mustang. The 1963 Mustang II concept car was designed with a variation of the production model's front and rear ends with a roof that was 2.7 inches shorter.Introduced early on April 17, 1964,and thus dubbed as a "1964½" by Mustang fans, the 1965 Mustang was the automaker's most successful launch since the Model A.The Mustang has undergone several transformations to its current sixth generation.

The Mustang created the "pony car" class of American automobiles, affordable sporty coupes with long hoods and short rear decks and gave rise to competitors such as the Chevrolet Camaro,Pontiac Firebird, AMC Javelin, Chrysler's revamped Plymouth Barracuda, and the first generation Dodge Challenger. The Mustang is also credited for inspiring the designs of coupés such as the Toyota Celica and Ford Capri, which were imported to the United States.

'''''''''''''''''''''''''WITH STANDARD IGNITION''''''''''''''''''''''''''''''

1.Inflate all tires to pressure listed on tire placard.

2.Turn ignition to OFF position and press and release brake pedal.

3.Cycle ignition from OFF to RUN position 3 times, ending in RUN position.

4.Press and release brake pedal.

5.Turn ignition to OFF position.

6.Cycle ignition from OFF to RUN position 3 times, ending in RUN position.

7.Horn will sound once and TPMS telltale will blink once train mode is initiated.  If equipped with message center, it will display TRAIN LF TIRE. Place antennae of learn tool on sidewall of LF tire 180° from valve stem to activate sensor. Horn will sound once sensor has been recognized. Repeat step for RF, RR, and LR tires.

8.After training LR tire, the message center will display TRAINING MODE COMPLETE. If the vehicle is not equipped with the message center display, successful completion can be verified by turning the ignition to the OFF position and not hearing the horn sound. If the horn sounds, the training procedure must be repeated.

'''''''''WITH INTEGRATED KEY FOB (ACTUAL KEY CONTAINED IN KEY FOB) PUSH-BUTTON START''''''''''''''''''''''''

1.With vehicle off, press and release the brake pedal.

2.Using the push button, press and hold the button until the vehicle is in accessory mode (ACC mode). WARNING: DO NOT PUSH AND RELEASE TOO QUICKLY…PUSH--WAIT FOR SOUND--RELEASE.

3.Power off by pushing the button 1 time.

4.Repeat 2 more times, ending in ACC mode.

5.Press and release the brake pedal, then turn vehicle off.

6.Using the push button, press and hold the button until the vehicle is in accessory mode.

7.Power off by pushing the button 1 time.

8.Repeat 2 more times, ending in ACC mode.

9.Horn will sound once the TPMS telltale will blink once train mode is initiated. If equipped with message center, it will display TRAIN LF TIRE.

10.Starting at LF tire, decrease air pressure until horn chirps.  Repeat procedure for remaining tires in the following order: RF, RR, and LR. If equipped with banded sensors, place antennae of learn tool on sidewall of LF tire 180° from valve stem to activate sensor. Horn will sound once sensor has been recognized. Repeat step for RF, RR, and LR tires.

11.After successfully programming the LR tire, the message center should display "TRAINING COMPLETE."

12.Inflate all tires to pressure listed on tire placard.

''''''''''''''''WITH INTELLIGENT ASSIST IGNITION SYSTEM (NO ACTUAL KEY CONTAINED IN KEY FOB)'''''''''''''''''

1.With vehicle off, press and release the brake pedal.

2.Using the push button, press once to turn on, then press again to put vehicle into ACC mode, then press again to turn vehicle off.

3.Repeat 2 more times, ending in ACC mode.

4.Press and release the brake pedal, then turn vehicle off.

5.Using the push button, press once to turn on, then press again to put vehicle into ACC mode, then press again to turn vehicle off.

6.Repeat 2 more times, ending in ACC mode.

7.Horn will sound once and TPMS telltale will blink once train mode is initiated. If equipped with message center, it will display TRAIN LF TIRE.

8.Starting at LF tire, decrease air pressure until horn chirps.  Repeat procedure for remaining tires in the following order: RF, RR, and LR. If equipped with banded sensors, place antennae of learn tool on sidewall of LF tire 180° from valve stem to activate sensor. Horn will sound once sensor has been recognized.  Repeat step for RF, RR, and LR tires.

9.After successfully programming the LR tire, the message center should display "TRAINING COMPLETE."

10.Inflate all tires to pressure listed on tire placard.