BMW X6 TPMS Reset Tutorial, Easy and Effective
PROCEDURE NUMBER 1
1.Inflate all tires to pressure listed on tire placard.
2.Turn ignition to ON position (engine off).
3.Press and release the MENU button on the EVIC until the message RETRAIN TIRE SENSOR- NO is displayed.
4.Press the STEP button to select YES.
5.Press the MENU button to start the relearn process. The EVIC will display the message, TRAIN LEFT FRONT TIRE.
6.Starting at LF tire, place relearn magnet over valve stem until horn sounds.
7.After horn sounds, proceed as in step 5 for the next 3 sensors in this order: RF, RR, LR, SP (if equipped).
8.Once the EVIC displays the message TRAINING COMPLETE, depress the STEP, C/T, RESET, or MENU buttons to exit the relearn procedure.
1.Inflate all tires to pressure listed on tire placard.
2.Turn ignition to ON position (engine off).
3.Press and release the MENU button on the EVIC until the message RETRAIN TIRE SENSOR- NO is displayed.
4.Press the STEP button to select YES.
5.Press the MENU button to start the relearn process. The EVIC will display the message, TRAIN LEFT FRONT TIRE.
6.Starting at LF tire, place relearn magnet over valve stem until horn sounds.
7.After horn sounds, proceed as in step 5 for the next 3 sensors in this order: RF, RR, LR, SP (if equipped).
8.Once the EVIC displays the message TRAINING COMPLETE, depress the STEP, C/T, RESET, or MENU buttons to exit the relearn procedure.
NOTE: USE PROCEDURE NUMBER 2 IF NUMBER 1 FAIL.
PROCEDURE NUMBER 2
AUTO RELEARN: Ensure all tires are inflated to the pressure listed on the tire placard. Vehicle
must be driven for at least 10 minutes while maintaining speed above 15mph in order for the
system to learn new sensor IDs.
PROCEDURE NUMBER 2
AUTO RELEARN: Ensure all tires are inflated to the pressure listed on the tire placard. Vehicle
must be driven for at least 10 minutes while maintaining speed above 15mph in order for the
system to learn new sensor IDs.
No comments:
Post a Comment