Chrysler Dakota Manual Oil Reset Guide

Chrysler Dakota Manual Oil Reset Guide

2005-2007

I.Turn off the ignition.

2.Press and hold the TRIP ODOMETER button in

the instrument cluster and turn the ignition to

Accessory.

3.Keep the button pressed for 5 seconds until

OIL SERVICE RESET (RE) or INSPECTION RESET

(RE) appears in the display.Then release the

button.

4.Press and hold the button again for 5 seconds

until RE or RESET flashes in the display.Then

release the button.

5.With the display flashing, press the button

briefly to reset and display the new Service

Interval.

6.After this, END SIA appears in the display for

approximately 2 seconds.

7.Turn the ignition off and start the engine to

verify the indicator has been reset.

2008-2010

1.Turn the ignition to run (one position before

starting engine).

2.Fully depress the accelerator pedal slowly

three times within 10 seconds.

3.Turn the ignition off and then start the engine

to verify the indicator has been reset.