Chrysler 300 Manual Oil Reset Guide
2005-2007
Turn Ignition On
Depress Gas Pedal 3 Times Rapidly
Cycle Ignition Off/On
Done
2008-2010
1.Turn the ignition to run (one position before
starting engine).
2.Fully depress the accelerator pedal slowly
three times within 10 seconds.
3.Turn the ignition off and then start the engine
to verify the indicator has been reset.
2011-2012
1. Turn Ignition to RUN but do not START.
2. Depress Gas Pedal 3 Times Rapidly Within 10
sec
3. Turn ignition to off
4.Done
Chrysler 300 and 300C
2004-2011
1. Turn on the ignition switch.
2. Within 10s, fully depress and release the
accelerator pedal.
3. Turn off the ignition switch.
2. Within 10s, fully depress and release the
accelerator pedal.
3. Turn off the ignition switch.
No comments:
Post a Comment